Abstract
The rapid expansion of electronic waste (e-waste) has intensified the need for sustainable metal recovery methods which can replace energy-intensive pyrometallurgical and hydrometallurgical routes. This study presents a cradle-to-gate Life Cycle Assessment (LCA) of a bioleaching-based Printed Circuit Board (PCB) recycling system using experiment-derived inventory data for realistic environmental attribution. The process integrates mechanical pre-treatment, bioleaching by Exiguobacterium himgiriensis and Enterobacter quasihormaechei, selective precipitation, solvent extraction, and final metal refining, modelled in openLCA 2.4.1 with Ecoinvent 3.11 database. For the treatment of 1 kg of waste PCB the bioleaching-based recovery process resulted in a global warming potential of 0.03511 kg CO2-eq, freshwater ecotoxicity impact of 0.02804 CTUe, and marine eutrophication potential of 8.96 × 10− 5 kg N-eq. Contribution analysis and Monte Carlo uncertainty propagation (5000 iterations, 95% confidence intervals) indicated that energy consumption, downstream metal recovery, and trace metal emissions were the main factors influencing environmental performance. Process hotspot rankings remained invariant across all uncertainty scenarios, validating the robustness of optimization strategies. Metal recovery efficiencies of Cu, Fe, Zn, and Ag were 90%, 82%, 58%, and 92%, respectively. Sensitivity analysis showed that renewable electricity substitution and effluent metal recovery could cut impacts by over 60%. The findings highlight bioleaching as a scalable, environmentally superior route for PCB metal recovery within circular economy frameworks.
Acknowledgements
Authors would like to acknowledge the Department of Bioengineering and Biotechnology, Bioinformatics Lab, and Central Instrumentation Facility, BIT Mesra, Ranchi, for providing laboratory and technical facilities to complete these experiments.
Funding
Banhi Halder has financial support from Anusandhan National Research Foundation, Government of India (CRG/2022/006243).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Ethical approval
This study does not involve animal or human subjects.
Consent for publication
All authors have provided consent for the publication of this manuscript in its current form.
Consent to participate
Informed consent was obtained from all individual participants included in the study.
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License, which permits any non-commercial use, sharing, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if you modified the licensed material. You do not have permission under this licence to share adapted material derived from this article or parts of it. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by-nc-nd/4.0/.
Reprints and permissions
About this article
Cite this article
Halder, B., Dutta, R., Kumari, N. et al. Life cycle assessment of bioleaching for metal recovery from waste PCBs: A sustainable approach using openLCA.
Sci Rep (2026). https://doi.org/10.1038/s41598-026-60356-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-026-60356-6
Keywords
- Bioleaching
- PCBs
- OpenLCA
- Life cycle assessment
- Environmental impact
- Circular economy
Source: Ecology - nature.com
