Aeronautical and astronautical engineering

Subterms

    More stories

    • 113 Shares149 Views

      in Energy

      In nanotube science, is boron nitride the new carbon?

      by

      Engineers at MIT and the University of Tokyo have produced centimeter-scale structures, large enough for the eye to see, that are packed with hundreds of billions of hollow aligned fibers, or nanotubes, made from hexagonal boron nitride.

      Hexagonal boron nitride, or hBN, is a single-atom-thin material that has been coined “white graphene” for its transparent appearance and its similarity to carbon-based graphene in molecular structure and strength. It can also withstand higher temperatures than graphene, and is electrically insulating, rather than conductive. When hBN is rolled into nanometer-scale tubes, or nanotubes, its exceptional properties are significantly enhanced.

      The team’s results, published today in the journal ACS Nano, provide a route toward fabricating aligned boron nitride nanotubes (A-BNNTs) in bulk. The researchers plan to harness the technique to fabricate bulk-scale arrays of these nanotubes, which can then be combined with other materials to make stronger, more heat-resistant composites, for instance to shield space structures and hypersonic aircraft.

      As hBN is transparent and electrically insulating, the team also envisions incorporating the BNNTs into transparent windows and using them to electrically insulate sensors within electronic devices. The team is also investigating ways to weave the nanofibers into membranes for water filtration and for “blue energy” — a concept for renewable energy in which electricity is produced from the ionic filtering of salt water into fresh water.

      Brian Wardle, professor of aeronautics and astronautics at MIT, likens the team’s results to scientists’ decades-long, ongoing pursuit of manufacturing bulk-scale carbon nanotubes.

      “In 1991, a single carbon nanotube was identified as an interesting thing, but it’s been 30 years getting to bulk aligned carbon nanotubes, and the world’s not even fully there yet,” Wardle says. “With the work we’re doing, we’ve just short-circuited about 20 years in getting to bulk-scale versions of aligned boron nitride nanotubes.”

      Wardle is the senior author of the new study, which includes lead author and MIT research scientist Luiz Acauan, former MIT postdoc Haozhe Wang, and collaborators at the University of Tokyo.

      A vision, aligned

      Like graphene, hexagonal boron nitride has a molecular structure resembling chicken wire. In graphene, this chicken wire configuration is made entirely of carbon atoms, arranged in a repeating pattern of hexagons. For hBN, the hexagons are composed of alternating atoms of boron and nitrogen. In recent years, researchers have found that two-dimensional sheets of hBN exhibit exceptional properties of strength, stiffness, and resilience at high temperatures. When sheets of hBN are rolled into nanotube form, these properties are further enhanced, particularly when the nanotubes are aligned, like tiny trees in a densely packed forest.

      But finding ways to synthesize stable, high quality BNNTs has proven challenging. A handful of efforts to do so have produced low-quality, nonaligned fibers.

      “If you can align them, you have much better chance of harnessing BNNTs properties at the bulk scale to make actual physical devices, composites, and membranes,” Wardle says.

      In 2020, Rong Xiang and colleagues at the University of Tokyo found they could produce high-quality boron nitride nanotubes by first using a conventional approach of chemical vapor deposition to grow a forest of short, few micron-long carbon nanotubes. They then coated the carbon-based forest with “precursors” of boron and nitrogen gas, which when baked in an oven at high temperatures crystallized onto the carbon nanotubes to form high-quality nanotubes of hexagonal boron nitride with carbon nanotubes inside.

      Burning scaffolds

      In the new study, Wardle and Acauan have extend and scale Xiang’s approach, essentially removing the underlying carbon nanotubes and leaving the long boron nitride nanotubes to stand on their own. The team drew on the expertise of Wardle’s group, which has focused for years on fabricating high-quality aligned arrays of carbon nanotubes. With their current work, the researchers looked for ways to tweak the temperatures and pressures of the chemical vapor deposition process in order to remove the carbon nanotubes while leaving the boron nitride nanotubes intact.

      “The first few times we did it, it was completely ugly garbage,” Wardle recalls. “The tubes curled up into a ball, and they didn’t work.”

      Eventually, the team hit on a combination of temperatures, pressures, and precursors that did the trick. With this combination of processes, the researchers first reproduced the steps that Xiang took to synthesize the boron-nitride-coated carbon nanotubes. As hBN is resistant to higher temperatures than graphene, the team then cranked up the heat to burn away the underlying black carbon nanotube scaffold, while leaving the transparent, freestanding boron nitride nanotubes intact.
      By using carbon nanotubes as a scaffold, MIT engineers grow forests of “white graphene” that emerge (in MIT pattern) after burning away the black carbon scaffold. Courtesy of the researchersIn microscopic images, the team observed clear crystalline structures — evidence that the boron nitride nanotubes have a high quality. The structures were also dense: Within a square centimeter, the researchers were able to synthesize a forest of more than 100 billion aligned boron nitride nanotubes, that measured about a millimeter in height — large enough to be visible by eye. By nanotube engineering standards, these dimensions are considered to be “bulk” in scale.

      “We are now able to make these nanoscale fibers at bulk scale, which has never been shown before,” Acauan says.

      To demonstrate the flexibility of their technique, the team synthesized larger carbon-based structures, including a weave of carbon fibers, a mat of “fuzzy” carbon nanotubes, and sheets of randomly oriented carbon nanotubes known as “buckypaper.” They coated each carbon-based sample with boron and nitrogen precursors, then went through their process to burn away the underlying carbon. In each demonstration, they were left with a boron-nitride replica of the original black carbon scaffold.

      They also were able to “knock down” the forests of BNNTs, producing horizontally aligned fiber films that are a preferred configuration for incorporating into composite materials.

      “We are now working toward fibers to reinforce ceramic matrix composites, for hypersonic and space applications where there are very high temperatures, and for windows for devices that need to be optically transparent,” Wardle says. “You could make transparent materials that are reinforced with these very strong nanotubes.”

      This research was supported, in part, by Airbus, ANSYS, Boeing, Embraer, Lockheed Martin, Saab AB, and Teijin Carbon America through MIT’s Nano-Engineered Composite aerospace STructures (NECST) Consortium. More

    • 175 Shares179 Views

      in Energy

      Bridging careers in aerospace manufacturing and fusion energy, with a focus on intentional inclusion

      by

      “A big theme of my life has been focusing on intentional inclusion and how I can create environments where people can really bring their whole authentic selves to work,” says Joy Dunn ’08. As the vice president of operations at Commonwealth Fusion Systems, an MIT spinout working to achieve commercial fusion energy, Dunn looks for solutions to the world’s greatest climate challenges — while creating an open and equitable work environment where everyone can succeed.

      This theme has been cultivated throughout her professional and personal life, including as a Young Global Leader at the World Economic Forum and as a board member at Out for Undergrad, an organization that works with LGBTQ+ college students to help them achieve their personal and professional goals. Through her careers both in aerospace and energy, Dunn has striven to instill a sense of equity and inclusion from the inside out.

      Developing a love for space

      Dunn’s childhood was shaped by space. “I was really inspired as a kid to be an astronaut,” she says, “and for me that never stopped.” Dunn’s parents — both of whom had careers in the aerospace industry — encouraged her from an early age to pursue her interests, from building model rockets to visiting the National Air and Space Museum to attending space camp. A large inspiration for this passion arose when she received a signed photo from Sally Ride — the first American woman in space — that read, “To Joy, reach for the stars.”

      As her interests continued to grow in middle school, she and her mom looked to see what it would take to become an astronaut, asking questions such as “what are the common career paths?” and “what schools did astronauts typically go to?” They quickly found that MIT was at the top of that list, and by seventh grade, Dunn had set her sights on the Institute. 

      After years of hard work, Dunn entered MIT in fall 2004 with a major in aeronautical and astronautical engineering (AeroAstro). At MIT, she remained fully committed to her passion while also expanding into other activities such as varsity softball, the MIT Undergraduate Association, and the Alpha Chi Omega sorority.

      One of the highlights of Dunn’s college career was Unified Engineering, a year-long course required for all AeroAstro majors that provides a foundational knowledge of aerospace engineering — culminating in a team competition where students design and build remote-controlled planes to be pitted against each other. “My team actually got first place, which was very exciting,” she recalls. “And I honestly give a lot of that credit to our pilot. He did a very good job of not crashing!” In fact, that pilot was Warren Hoburg ’08, a former assistant professor in AeroAstro and current NASA astronaut training for a mission on the International Space Station.

      Pursuing her passion at SpaceX

      Dunn’s undergraduate experience culminated with an internship at the aerospace manufacturing company SpaceX in summer 2008. “It was by far my favorite internship of the ones that I had in college. I got to work on really hands-on projects and had the same amount of responsibility as a full-time employee,” she says.

      By the end of the internship, she was hired as a propulsion development engineer for the Dragon spacecraft, where she helped to build the thrusters for the first Dragon mission. Eventually, she transferred to the role of manufacturing engineer. “A lot of what I’ve done in my life is building things and looking for process improvements,” so it was a natural fit. From there, she rose through the ranks, eventually becoming the senior manager of spacecraft manufacturing engineering, where she oversaw all the manufacturing, test, and integration engineers working on Dragon. “It was pretty incredible to go from building thrusters to building the whole vehicle,” she says.

      During her tenure, Dunn also co-founded SpaceX’s Women’s Network and its LGBT affinity group, Out and Allied. “It was about providing spaces for employees to get together and provide a sense of community,” she says. Through these groups, she helped start mentorship and community outreach programs, as well as helped grow the pipeline of women in leadership roles for the company.

      In spite of all her successes at SpaceX, she couldn’t help but think about what came next. “I had been at SpaceX for almost a decade and had these thoughts of, ‘do I want to do another tour of duty or look at doing something else?’ The main criteria I set for myself was to do something that is equally or more world-changing than SpaceX.”

      A pivot to fusion

      It was at this time in 2018 that Dunn received an email from a former mentor asking if she had heard about a fusion energy startup called Commonwealth Fusion Systems (CFS) that worked with the MIT Plasma Science and Fusion Center. “I didn’t know much about fusion at all,” she says. “I had heard about it as a science project that was still many, many years away as a viable energy source.”

      After learning more about the technology and company, “I was just like, ‘holy cow, this has the potential to be even more world-changing than what SpaceX is doing.’” She adds, “I decided that I wanted to spend my time and brainpower focusing on cleaning up the planet instead of getting off it.”

      After connecting with CFS CEO Bob Mumgaard SM ’15, PhD ’15, Dunn joined the company and returned to Cambridge as the head of manufacturing. While moving from the aerospace industry to fusion energy was a large shift, she said her first project — building a fusion-relevant, high-temperature superconducting magnet capable of achieving 20 tesla — tied back into her life of being a builder who likes to get her hands on things.

      Over the course of two years, she oversaw the production and scaling of the magnet manufacturing process. When she first came in, the magnets were being constructed in a time-consuming and manual way. “One of the things I’m most proud of from this project is teaching MIT research scientists how to think like manufacturing engineers,” she says. “It was a great symbiotic relationship. The MIT folks taught us the physics and science behind the magnets, and we came in to figure out how to make them into a more manufacturable product.”

      In September 2021, CFS tested this high-temperature superconducting magnet and achieved its goal of 20 tesla. This was a pivotal moment for the company that brought it one step closer to achieving its goal of producing net-positive fusion power. Now, CFS has begun work on a new campus in Devens, Massachusetts, to house their manufacturing operations and SPARC fusion device. Dunn plays a pivotal role in this expansion as well. In March 2021, she was promoted to the head of operations, which expanded her responsibilities beyond managing manufacturing to include facilities, construction, safety, and quality. “It’s been incredible to watch the campus grow from a pile of dirt … into full buildings.”

      In addition to the groundbreaking work, Dunn highlights the culture of inclusiveness as something that makes CFS stand apart to her. “One of the main reasons that drew me to CFS was hearing from the company founders about their thoughts on diversity, equity, and inclusion, and how they wanted to make that a key focus for their company. That’s been so important in my career, and I’m really excited to see how much that’s valued at CFS.” The company has carried this out through programs such as Fusion Inclusion, an initiative that aims to build a strong and inclusive community from the inside out.

      Dunn stresses “the impact that fusion can have on our world and for addressing issues of environmental injustice through an equitable distribution of power and electricity.” Adding, “That’s a huge lever that we have. I’m excited to watch CFS grow and for us to make a really positive impact on the world in that way.”

      This article appears in the Spring 2022 issue of Energy Futures, the magazine of the MIT Energy Initiative. More

    • 150 Shares169 Views

      in Energy

      MIT Climate and Sustainability Consortium announces recipients of inaugural MCSC Seed Awards

      by

      The MIT Climate and Sustainability Consortium (MCSC) has awarded 20 projects a total of $5 million over two years in its first-ever 2022 MCSC Seed Awards program. The winning projects are led by principal investigators across all five of MIT’s schools.

      The goal of the MCSC Seed Awards is to engage MIT researchers and link the economy-wide work of the consortium to ongoing and emerging climate and sustainability efforts across campus. The program offers further opportunity to build networks among the awarded projects to deepen the impact of each and ensure the total is greater than the sum of its parts.

      For example, to drive progress under the awards category Circularity and Materials, the MCSC can facilitate connections between the technologists at MIT who are developing recovery approaches for metals, plastics, and fiber; the urban planners who are uncovering barriers to reuse; and the engineers, who will look for efficiency opportunities in reverse supply chains.

      “The MCSC Seed Awards are designed to complement actions previously outlined in Fast Forward: MIT’s Climate Action Plan for the Decade and, more specifically, the Climate Grand Challenges,” says Anantha P. Chandrakasan, dean of the MIT School of Engineering, Vannevar Bush Professor of Electrical Engineering and Computer Science, and chair of the MIT Climate and Sustainability Consortium. “In collaboration with seed award recipients and MCSC industry members, we are eager to engage in interdisciplinary exploration and propel urgent advancements in climate and sustainability.” 

      By supporting MIT researchers with expertise in economics, infrastructure, community risk assessment, mobility, and alternative fuels, the MCSC will accelerate implementation of cross-disciplinary solutions in the awards category Decarbonized and Resilient Value Chains. Enhancing Natural Carbon Sinks and building connections to local communities will require associations across experts in ecosystem change, biodiversity, improved agricultural practice and engagement with farmers, all of which the consortium can begin to foster through the seed awards.

      “Funding opportunities across campus has been a top priority since launching the MCSC,” says Jeremy Gregory, MCSC executive director. “It is our honor to support innovative teams of MIT researchers through the inaugural 2022 MCSC Seed Awards program.”

      The winning projects are tightly aligned with the MCSC’s areas of focus, which were derived from a year of highly engaged collaborations with MCSC member companies. The projects apply across the member’s climate and sustainability goals.

      The MCSC’s 16 member companies span many industries, and since early 2021, have met with members of the MIT community to define focused problem statements for industry-specific challenges, identify meaningful partnerships and collaborations, and develop clear and scalable priorities. Outcomes from these collaborations laid the foundation for the focus areas, which have shaped the work of the MCSC. Specifically, the MCSC Industry Advisory Board engaged with MIT on key strategic directions, and played a critical role in the MCSC’s series of interactive events. These included virtual workshops hosted last summer, each on a specific topic that allowed companies to work with MIT and each other to align key assumptions, identify blind spots in corporate goal-setting, and leverage synergies between members, across industries. The work continued in follow-up sessions and an annual symposium.

      “We are excited to see how the seed award efforts will help our member companies reach or even exceed their ambitious climate targets, find new cross-sector links among each other, seek opportunities to lead, and ripple key lessons within their industry, while also deepening the Institute’s strong foundation in climate and sustainability research,” says Elsa Olivetti, the Esther and Harold E. Edgerton Associate Professor in Materials Science and Engineering and MCSC co-director.

      As the seed projects take shape, the MCSC will provide ongoing opportunities for awardees to engage with the Industry Advisory Board and technical teams from the MCSC member companies to learn more about the potential for linking efforts to support and accelerate their climate and sustainability goals. Awardees will also have the chance to engage with other members of the MCSC community, including its interdisciplinary Faculty Steering Committee.

      “One of our mantras in the MCSC is to ‘amplify and extend’ existing efforts across campus; we’re always looking for ways to connect the collaborative industry relationships we’re building and the work we’re doing with other efforts on campus,” notes Jeffrey Grossman, the Morton and Claire Goulder and Family Professor in Environmental Systems, head of the Department of Materials Science and Engineering, and MCSC co-director. “We feel the urgency as well as the potential, and we don’t want to miss opportunities to do more and go faster.”

      The MCSC Seed Awards complement the Climate Grand Challenges, a new initiative to mobilize the entire MIT research community around developing the bold, interdisciplinary solutions needed to address difficult, unsolved climate problems. The 27 finalist teams addressed four broad research themes, which align with the MCSC’s focus areas. From these finalist teams, five flagship projects were announced in April 2022.

      The parallels between MCSC’s focus areas and the Climate Grand Challenges themes underscore an important connection between the shared long-term research interests of industry and academia. The challenges that some of the world’s largest and most influential companies have identified are complementary to MIT’s ongoing research and innovation — highlighting the tremendous opportunity to develop breakthroughs and scalable solutions quickly and effectively. Special Presidential Envoy for Climate John Kerry underscored the importance of developing these scalable solutions, including critical new technology, during a conversation with MIT President L. Rafael Reif at MIT’s first Climate Grand Challenges showcase event last month.

      Both the MCSC Seed Awards and the Climate Grand Challenges are part of MIT’s larger commitment and initiative to combat climate change; this was underscored in “Fast Forward: MIT’s Climate Action Plan for the Decade,” which the Institute published in May 2021.

      The project titles and research leads for each of the 20 awardees listed below are categorized by MCSC focus area.

      Decarbonized and resilient value chains

      “Collaborative community mapping toolkit for resilience planning,” led by Miho Mazereeuw, associate professor of architecture and urbanism in the Department of Architecture and director of the Urban Risk Lab (a research lead on Climate Grand Challenges flagship project) and Nicholas de Monchaux, professor and department head in the Department of Architecture
      “CP4All: Fast and local climate projections with scientific machine learning — towards accessibility for all of humanity,” led by Chris Hill, principal research scientist in the Department of Earth, Atmospheric and Planetary Sciences and Dava Newman, director of the MIT Media Lab and the Apollo Program Professor in the Department of Aeronautics and Astronautics
      “Emissions reductions and productivity in U.S. manufacturing,” led by Mert Demirer, assistant professor of applied economics at the MIT Sloan School of Management and Jing Li, assistant professor and William Barton Rogers Career Development Chair of Energy Economics in the MIT Sloan School of Management
      “Logistics electrification through scalable and inter-operable charging infrastructure: operations, planning, and policy,” led by Alex Jacquillat, the 1942 Career Development Professor and assistant professor of operations research and statistics in the MIT Sloan School of Management
      “Powertrain and system design for LOHC-powered long-haul trucking,” led by William Green, the Hoyt Hottel Professor in Chemical Engineering in the Department of Chemical Engineering and postdoctoral officer, and Wai K. Cheng, professor in the Department of Mechanical Engineering and director of the Sloan Automotive Laboratory
      “Sustainable Separation and Purification of Biochemicals and Biofuels using Membranes,” led by John Lienhard, the Abdul Latif Jameel Professor of Water in the Department of Mechanical Engineering, director of the Abdul Latif Jameel Water and Food Systems Lab, and director of the Rohsenow Kendall Heat Transfer Laboratory; and Nicolas Hadjiconstantinou, professor in the Department of Mechanical Engineering, co-director of the Center for Computational Science and Engineering, associate director of the Center for Exascale Simulation of Materials in Extreme Environments, and graduate officer
      “Toolkit for assessing the vulnerability of industry infrastructure siting to climate change,” led by Michael Howland, assistant professor in the Department of Civil and Environmental Engineering

      Circularity and Materials

      “Colorimetric Sulfidation for Aluminum Recycling,” led by Antoine Allanore, associate professor of metallurgy in the Department of Materials Science and Engineering
      “Double Loop Circularity in Materials Design Demonstrated on Polyurethanes,” led by Brad Olsen, the Alexander and I. Michael Kasser (1960) Professor and graduate admissions co-chair in the Department of Chemical Engineering, and Kristala Prather, the Arthur Dehon Little Professor and department executive officer in the Department of Chemical Engineering
      “Engineering of a microbial consortium to degrade and valorize plastic waste,” led by Otto Cordero, associate professor in the Department of Civil and Environmental Engineering, and Desiree Plata, the Gilbert W. Winslow (1937) Career Development Professor in Civil Engineering and associate professor in the Department of Civil and Environmental Engineering
      “Fruit-peel-inspired, biodegradable packaging platform with multifunctional barrier properties,” led by Kripa Varanasi, professor in the Department of Mechanical Engineering
      “High Throughput Screening of Sustainable Polyesters for Fibers,” led by Gregory Rutledge, the Lammot du Pont Professor in the Department of Chemical Engineering, and Brad Olsen, Alexander and I. Michael Kasser (1960) Professor and graduate admissions co-chair in the Department of Chemical Engineering
      “Short-term and long-term efficiency gains in reverse supply chains,” led by Yossi Sheffi, the Elisha Gray II Professor of Engineering Systems, professor in the Department of Civil and Environmental Engineering, and director of the Center for Transportation and Logistics
      The costs and benefits of circularity in building construction, led by Siqi Zheng, the STL Champion Professor of Urban and Real Estate Sustainability at the MIT Center for Real Estate and Department of Urban Studies and Planning, faculty director of the MIT Center for Real Estate, and faculty director for the MIT Sustainable Urbanization Lab; and Randolph Kirchain, principal research scientist and co-director of MIT Concrete Sustainability Hub

      Natural carbon sinks

      “Carbon sequestration through sustainable practices by smallholder farmers,” led by Joann de Zegher, the Maurice F. Strong Career Development Professor and assistant professor of operations management in the MIT Sloan School of Management, and Karen Zheng the George M. Bunker Professor and associate professor of operations management in the MIT Sloan School of Management
      “Coatings to protect and enhance diverse microbes for improved soil health and crop yields,” led by Ariel Furst, the Raymond A. (1921) And Helen E. St. Laurent Career Development Professor of Chemical Engineering in the Department of Chemical Engineering, and Mary Gehring, associate professor of biology in the Department of Biology, core member of the Whitehead Institute for Biomedical Research, and graduate officer
      “ECO-LENS: Mainstreaming biodiversity data through AI,” led by John Fernández, professor of building technology in the Department of Architecture and director of MIT Environmental Solutions Initiative
      “Growing season length, productivity, and carbon balance of global ecosystems under climate change,” led by Charles Harvey, professor in the Department of Civil and Environmental Engineering, and César Terrer, assistant professor in the Department of Civil and Environmental Engineering

      Social dimensions and adaptation

      “Anthro-engineering decarbonization at the million-person scale,” led by Manduhai Buyandelger, professor in the Anthropology Section, and Michael Short, the Class of ’42 Associate Professor of Nuclear Science and Engineering in the Department of Nuclear Science and Engineering
      “Sustainable solutions for climate change adaptation: weaving traditional ecological knowledge and STEAM,” led by Janelle Knox-Hayes, the Lister Brothers Associate Professor of Economic Geography and Planning and head of the Environmental Policy and Planning Group in the Department of Urban Studies and Planning, and Miho Mazereeuw, associate professor of architecture and urbanism in the Department of Architecture and director of the Urban Risk Lab (a research lead on a Climate Grand Challenges flagship project) More

    • 175 Shares149 Views

      in Environment

      Q&A: Climate Grand Challenges finalists on using data and science to forecast climate-related risk

      by

      Note: This is the final article in a four-part interview series featuring the work of the 27 MIT Climate Grand Challenges finalist teams, which received a total of $2.7 million in startup funding to advance their projects. This month, the Institute will name a subset of the finalists as multiyear flagship projects.

      Advances in computation, artificial intelligence, robotics, and data science are enabling a new generation of observational tools and scientific modeling with the potential to produce timely, reliable, and quantitative analysis of future climate risks at a local scale. These projections can increase the accuracy and efficacy of early warning systems, improve emergency planning, and provide actionable information for climate mitigation and adaptation efforts, as human actions continue to change planetary conditions.

      In conversations prepared for MIT News, faculty from four Climate Grand Challenges teams with projects in the competition’s “Using data and science to forecast climate-related risk” category describe the promising new technologies that can help scientists understand the Earth’s climate system on a finer scale than ever before. (The other Climate Grand Challenges research themes include building equity and fairness into climate solutions, removing, managing, and storing greenhouse gases, and decarbonizing complex industries and processes.) The following responses have been edited for length and clarity.

      An observational system that can initiate a climate risk forecasting revolution

      Despite recent technological advances and massive volumes of data, climate forecasts remain highly uncertain. Gaps in observational capabilities create substantial challenges to predicting extreme weather events and establishing effective mitigation and adaptation strategies. R. John Hansman, the T. Wilson Professor of Aeronautics and Astronautics and director of the MIT International Center for Air Transportation, discusses the Stratospheric Airborne Climate Observatory System (SACOS) being developed together with Brent Minchew, the Cecil and Ida Green Career Development Professor in the Department of Earth, Atmospheric and Planetary Sciences (EAPS), and a team that includes researchers from MIT Lincoln Laboratory and Harvard University.

      Q: How does SACOS reduce uncertainty in climate risk forecasting?

      A: There is a critical need for higher spatial and temporal resolution observations of the climate system than are currently available through remote (satellite or airborne) and surface (in-situ) sensing. We are developing an ensemble of high-endurance, solar-powered aircraft with instrument systems capable of performing months-long climate observing missions that satellites or aircraft alone cannot fulfill. Summer months are ideal for SACOS operations, as many key climate phenomena are active and short night periods reduce the battery mass, vehicle size, and technical risks. These observations hold the potential to inform and predict, allowing emergency planners, policymakers, and the rest of society to better prepare for the changes to come.

      Q: Describe the types of observing missions where SACOS could provide critical improvements.

      A: The demise of the Antarctic Ice Sheet, which is leading to rising sea levels around the world and threatening the displacement of millions of people, is one example. Current sea level forecasts struggle to account for giant fissures that create massive icebergs and cause the Antarctic Ice Sheet to flow more rapidly into the ocean. SACOS can track these fissures to accurately forecast ice slippage and give impacted populations enough time to prepare or evacuate. Elsewhere, widespread droughts cause rampant wildfires and water shortages. SACOS has the ability to monitor soil moisture and humidity in critically dry regions to identify where and when wildfires and droughts are imminent. SACOS also offers the most effective method to measure, track, and predict local ozone depletion over North America, which has resulted in increasingly severe summer thunderstorms.

      Quantifying and managing the risks of sea-level rise

      Prevailing estimates of sea-level rise range from approximately 20 centimeters to 2 meters by the end of the century, with the associated costs on the order of trillions of dollars. The instability of certain portions of the world’s ice sheets creates vast uncertainties, complicating how the world prepares for and responds to these potential changes. EAPS Professor Brent Minchew is leading another Climate Grand Challenges finalist team working on an integrated, multidisciplinary effort to improve the scientific understanding of sea-level rise and provide actionable information and tools to manage the risks it poses.

      Q: What have been the most significant challenges to understanding the potential rates of sea-level rise?

      A: West Antarctica is one of the most remote, inaccessible, and hostile places on Earth — to people and equipment. Thus, opportunities to observe the collapse of the West Antarctic Ice Sheet, which contains enough ice to raise global sea levels by about 3 meters, are limited and current observations crudely resolved. It is essential that we understand how the floating edge of the ice sheets, often called ice shelves, fracture and collapse because they provide critical forces that govern the rate of ice mass loss and can stabilize the West Antarctic Ice Sheet.

      Q: How will your project advance what is currently known about sea-level rise?

      A: We aim to advance global-scale projections of sea-level rise through novel observational technologies and computational models of ice sheet change and to link those predictions to region- to neighborhood-scale estimates of costs and adaptation strategies. To do this, we propose two novel instruments: a first-of-its-kind drone that can fly for months at a time over Antarctica making continuous observations of critical areas and an airdropped seismometer and GPS bundle that can be deployed to vulnerable and hard-to-reach areas of the ice sheet. This technology will provide greater data quality and density and will observe the ice sheet at frequencies that are currently inaccessible — elements that are essential for understanding the physics governing the evolution of the ice sheet and sea-level rise.

      Changing flood risk for coastal communities in the developing world

      Globally, more than 600 million people live in low-elevation coastal areas that face an increasing risk of flooding from sea-level rise. This includes two-thirds of cities with populations of more than 5 million and regions that conduct the vast majority of global trade. Dara Entekhabi, the Bacardi and Stockholm Water Foundations Professor in the Department of Civil and Environmental Engineering and professor in the Department of Earth, Atmospheric, and Planetary Sciences, outlines an interdisciplinary partnership that leverages data and technology to guide short-term and chart long-term adaptation pathways with Miho Mazereeuw, associate professor of architecture and urbanism and director of the Urban Risk Lab in the School of Architecture and Planning, and Danielle Wood, assistant professor in the Program in Media Arts and Sciences and the Department of Aeronautics and Astronautics.

      Q: What is the key problem this program seeks to address?

      A: The accumulated heating of the Earth system due to fossil burning is largely absorbed by the oceans, and the stored heat expands the ocean volume leading to increased base height for tides. When the high tides inundate a city, the condition is referred to as “sunny day” flooding, but the saline waters corrode infrastructure and wreak havoc on daily routines. The danger ahead for many coastal cities in the developing world is the combination of increasing high tide intrusions, coupled with heavy precipitation storm events.

      Q: How will your proposed solutions impact flood risk management?

      A: We are producing detailed risk maps for coastal cities in developing countries using newly available, very high-resolution remote-sensing data from space-borne instruments, as well as historical tides records and regional storm characteristics. Using these datasets, we aim to produce street-by-street risk maps that provide local decision-makers and stakeholders with a way to estimate present and future flood risks. With the model of future tides and probabilistic precipitation events, we can forecast future inundation by a flooding event, decadal changes with various climate-change and sea-level rise projections, and an increase in the likelihood of sunny-day flooding. Working closely with local partners, we will develop toolkits to explore short-term emergency response, as well as long-term mitigation and adaptation techniques in six pilot locations in South and Southeast Asia, Africa, and South America.

      Ocean vital signs

      On average, every person on Earth generates fossil fuel emissions equivalent to an 8-pound bag of carbon, every day. Much of this is absorbed by the ocean, but there is wide variability in the estimates of oceanic absorption, which translates into differences of trillions of dollars in the required cost of mitigation. In the Department of Earth, Atmospheric and Planetary Sciences, Christopher Hill, a principal research engineer specializing in Earth and planetary computational science, works with Ryan Woosley, a principal research scientist focusing on the carbon cycle and ocean acidification. Hill explains that they hope to use artificial intelligence and machine learning to help resolve this uncertainty.

      Q: What is the current state of knowledge on air-sea interactions?

      A: Obtaining specific, accurate field measurements of critical physical, chemical, and biological exchanges between the ocean and the planet have historically entailed expensive science missions with large ship-based infrastructure that leave gaps in real-time data about significant ocean climate processes. Recent advances in highly scalable in-situ autonomous observing and navigation combined with airborne, remote sensing, and machine learning innovations have the potential to transform data gathering, provide more accurate information, and address fundamental scientific questions around air-sea interaction.

      Q: How will your approach accelerate real-time, autonomous surface ocean observing from an experimental research endeavor to a permanent and impactful solution?

      A: Our project seeks to demonstrate how a scalable surface ocean observing network can be launched and operated, and to illustrate how this can reduce uncertainties in estimates of air-sea carbon dioxide exchange. With an initial high-impact goal of substantially eliminating the vast uncertainties that plague our understanding of ocean uptake of carbon dioxide, we will gather critical measurements for improving extended weather and climate forecast models and reducing climate impact uncertainty. The results have the potential to more accurately identify trillions of dollars worth of economic activity. More

    • 38 Shares149 Views

      in Environment

      Ocean vital signs

      by

      Without the ocean, the climate crisis would be even worse than it is. Each year, the ocean absorbs billions of tons of carbon from the atmosphere, preventing warming that greenhouse gas would otherwise cause. Scientists estimate about 25 to 30 percent of all carbon released into the atmosphere by both human and natural sources is absorbed by the ocean.

      “But there’s a lot of uncertainty in that number,” says Ryan Woosley, a marine chemist and a principal research scientist in the Department of Earth, Atmospheric and Planetary Sciences (EAPS) at MIT. Different parts of the ocean take in different amounts of carbon depending on many factors, such as the season and the amount of mixing from storms. Current models of the carbon cycle don’t adequately capture this variation.

      To close the gap, Woosley and a team of other MIT scientists developed a research proposal for the MIT Climate Grand Challenges competition — an Institute-wide campaign to catalyze and fund innovative research addressing the climate crisis. The team’s proposal, “Ocean Vital Signs,” involves sending a fleet of sailing drones to cruise the oceans taking detailed measurements of how much carbon the ocean is really absorbing. Those data would be used to improve the precision of global carbon cycle models and improve researchers’ ability to verify emissions reductions claimed by countries.

      “If we start to enact mitigation strategies—either through removing CO2 from the atmosphere or reducing emissions — we need to know where CO2 is going in order to know how effective they are,” says Woosley. Without more precise models there’s no way to confirm whether observed carbon reductions were thanks to policy and people, or thanks to the ocean.

      “So that’s the trillion-dollar question,” says Woosley. “If countries are spending all this money to reduce emissions, is it enough to matter?”

      In February, the team’s Climate Grand Challenges proposal was named one of 27 finalists out of the almost 100 entries submitted. From among this list of finalists, MIT will announce in April the selection of five flagship projects to receive further funding and support.

      Woosley is leading the team along with Christopher Hill, a principal research engineer in EAPS. The team includes physical and chemical oceanographers, marine microbiologists, biogeochemists, and experts in computational modeling from across the department, in addition to collaborators from the Media Lab and the departments of Mathematics, Aeronautics and Astronautics, and Electrical Engineering and Computer Science.

      Today, data on the flux of carbon dioxide between the air and the oceans are collected in a piecemeal way. Research ships intermittently cruise out to gather data. Some commercial ships are also fitted with sensors. But these present a limited view of the entire ocean, and include biases. For instance, commercial ships usually avoid storms, which can increase the turnover of water exposed to the atmosphere and cause a substantial increase in the amount of carbon absorbed by the ocean.

      “It’s very difficult for us to get to it and measure that,” says Woosley. “But these drones can.”

      If funded, the team’s project would begin by deploying a few drones in a small area to test the technology. The wind-powered drones — made by a California-based company called Saildrone — would autonomously navigate through an area, collecting data on air-sea carbon dioxide flux continuously with solar-powered sensors. This would then scale up to more than 5,000 drone-days’ worth of observations, spread over five years, and in all five ocean basins.

      Those data would be used to feed neural networks to create more precise maps of how much carbon is absorbed by the oceans, shrinking the uncertainties involved in the models. These models would continue to be verified and improved by new data. “The better the models are, the more we can rely on them,” says Woosley. “But we will always need measurements to verify the models.”

      Improved carbon cycle models are relevant beyond climate warming as well. “CO2 is involved in so much of how the world works,” says Woosley. “We’re made of carbon, and all the other organisms and ecosystems are as well. What does the perturbation to the carbon cycle do to these ecosystems?”

      One of the best understood impacts is ocean acidification. Carbon absorbed by the ocean reacts to form an acid. A more acidic ocean can have dire impacts on marine organisms like coral and oysters, whose calcium carbonate shells and skeletons can dissolve in the lower pH. Since the Industrial Revolution, the ocean has become about 30 percent more acidic on average.

      “So while it’s great for us that the oceans have been taking up the CO2, it’s not great for the oceans,” says Woosley. “Knowing how this uptake affects the health of the ocean is important as well.” More

    • 138 Shares169 Views

      in Energy

      Q&A: Climate Grand Challenges finalists on new pathways to decarbonizing industry

      by

      Note: This is the third article in a four-part interview series highlighting the work of the 27 MIT Climate Grand Challenges finalist teams, which received a total of $2.7 million in startup funding to advance their projects. In April, the Institute will name a subset of the finalists as multiyear flagship projects.

      The industrial sector is the backbone of today’s global economy, yet its activities are among the most energy-intensive and the toughest to decarbonize. Efforts to reach net-zero targets and avert runaway climate change will not succeed without new solutions for replacing sources of carbon emissions with low-carbon alternatives and developing scalable nonemitting applications of hydrocarbons.

      In conversations prepared for MIT News, faculty from three of the teams with projects in the competition’s “Decarbonizing complex industries and processes” category discuss strategies for achieving impact in hard-to-abate sectors, from long-distance transportation and building construction to textile manufacturing and chemical refining. The other Climate Grand Challenges research themes include using data and science to forecast climate-related risk, building equity and fairness into climate solutions, and removing, managing, and storing greenhouse gases. The following responses have been edited for length and clarity.

      Moving toward an all-carbon material approach to building

      Faced with the prospect of building stock doubling globally by 2050, there is a great need for sustainable alternatives to conventional mineral- and metal-based construction materials. Mark Goulthorpe, associate professor in the Department of Architecture, explains the methods behind Carbon >Building, an initiative to develop energy-efficient building materials by reorienting hydrocarbons from current use as fuels to environmentally benign products, creating an entirely new genre of lightweight, all-carbon buildings that could actually drive decarbonization.

      Q: What are all-carbon buildings and how can they help mitigate climate change?

      A: Instead of burning hydrocarbons as fuel, which releases carbon dioxide and other greenhouse gases that contribute to atmospheric pollution, we seek to pioneer a process that uses carbon materially to build at macro scale. New forms of carbon — carbon nanotube, carbon foam, etc. — offer salient properties for building that might effectively displace the current material paradigm. Only hydrocarbons offer sufficient scale to beat out the billion-ton mineral and metal markets, and their perilous impact. Carbon nanotube from methane pyrolysis is of special interest, as it offers hydrogen as a byproduct.

      Q: How will society benefit from the widespread use of all-carbon buildings?

      A: We anticipate reducing costs and timelines in carbon composite buildings, while increasing quality, longevity, and performance, and diminishing environmental impact. Affordability of buildings is a growing problem in all global markets as the cost of labor and logistics in multimaterial assemblies creates a burden that is very detrimental to economic growth and results in overcrowding and urban blight.

      Alleviating these challenges would have huge societal benefits, especially for those in lower income brackets who cannot afford housing, but the biggest benefit would be in drastically reducing the environmental footprint of typical buildings, which account for nearly 40 percent of global energy consumption.

      An all-carbon building sector will not only reduce hydrocarbon extraction, but can produce higher value materials for building. We are looking to rethink the building industry by greatly streamlining global production and learning from the low-labor methods pioneered by composite manufacturing such as wind turbine blades, which are quick and cheap to produce. This technology can improve the sustainability and affordability of buildings — and holds the promise of faster, cheaper, greener, and more resilient modes of dwelling.

      Emissions reduction through innovation in the textile industry

      Collectively, the textile industry is responsible for over 4 billion metric tons of carbon dioxide equivalent per year, or 5 to 10 percent of global greenhouse gas emissions — more than aviation and maritime shipping combined. And the problem is only getting worse with the industry’s rapid growth. Under the current trajectory, consumption is projected to increase 30 percent by 2030, reaching 102 million tons. A diverse group of faculty and researchers led by Gregory Rutledge, the Lammot du Pont Professor in the Department of Chemical Engineering, and Yuly Fuentes-Medel, project manager for fiber technologies and research advisor to the MIT Innovation Initiative, is developing groundbreaking innovations to reshape how textiles are selected, sourced, designed, manufactured, and used, and to create the structural changes required for sustained reductions in emissions by this industry.

      Q: Why has the textile industry been difficult to decarbonize?

      A: The industry currently operates under a linear model that relies heavily on virgin feedstock, at roughly 97 percent, yet recycles or downcycles less than 15 percent. Furthermore, recent trends in “fast fashion” have led to massive underutilization of apparel, such that products are discarded on average after only seven to 10 uses. In an industry with high volume and low margins, replacement technologies must achieve emissions reduction at scale while maintaining performance and economic efficiency.

      There are also technical barriers to adopting circular business models, from the challenge of dealing with products comprising fiber blends and chemical additives to the low maturity of recycling technologies. The environmental impacts of textiles and apparel have been estimated using life cycle analysis, and industry-standard indexes are under development to assess sustainability throughout the life cycle of a product, but information and tools are needed to model how new solutions will alter those impacts and include the consumer as an active player to keep our planet safe. This project seeks to deliver both the new solutions and the tools to evaluate their potential for impact.

      Q: Describe the five components of your program. What is the anticipated timeline for implementing these solutions?

      A: Our plan comprises five programmatic sections, which include (1) enabling a paradigm shift to sustainable materials using nontraditional, carbon-negative polymers derived from biomass and additives that facilitate recycling; (2) rethinking manufacturing with processes to structure fibers and fabrics for performance, waste reduction, and increased material efficiency; (3) designing textiles for value by developing products that are customized, adaptable, and multifunctional, and that interact with their environment to reduce energy consumption; (4) exploring consumer behavior change through human interventions that reduce emissions by encouraging the adoption of new technologies, increased utilization of products, and circularity; and (5) establishing carbon transparency with systems-level analyses that measure the impact of these strategies and guide decision making.

      We have proposed a five-year timeline with annual targets for each project. Conservatively, we estimate our program could reduce greenhouse gas emissions in the industry by 25 percent by 2030, with further significant reductions to follow.

      Tough-to-decarbonize transportation

      Airplanes, transoceanic ships, and freight trucks are critical to transporting people and delivering goods, and the cornerstone of global commerce, manufacturing, and tourism. But these vehicles also emit 3.7 billion tons of carbon dioxide annually and, left unchecked, they could take up a quarter of the remaining carbon budget by 2050. William Green, the Hoyt C. Hottel Professor in the Department Chemical Engineering, co-leads a multidisciplinary team with Steven Barrett, professor of aeronautics and astronautics and director of the MIT Laboratory for Aviation and the Environment, that is working to identify and advance economically viable technologies and policies for decarbonizing heavy duty trucking, shipping, and aviation. The Tough to Decarbonize Transportation research program aims to design and optimize fuel chemistry and production, vehicles, operations, and policies to chart the course to net-zero emissions by midcentury.

      Q: What are the highest priority focus areas of your research program?

      A: Hydrocarbon fuels made from biomass are the least expensive option, but it seems impractical, and probably damaging to the environment, to harvest the huge amount of biomass that would be needed to meet the massive and growing energy demands from these sectors using today’s biomass-to-fuel technology. We are exploring strategies to increase the amount of useful fuel made per ton of biomass harvested, other methods to make low-climate-impact hydrocarbon fuels, such as from carbon dioxide, and ways to make fuels that do not contain carbon at all, such as with hydrogen, ammonia, and other hydrogen carriers.

      These latter zero-carbon options free us from the need for biomass or to capture gigatons of carbon dioxide, so they could be a very good long-term solution, but they would require changing the vehicles significantly, and the construction of new refueling infrastructure, with high capital costs.

      Q: What are the scientific, technological, and regulatory barriers to scaling and implementing potential solutions?

      A: Reimagining an aviation, trucking, and shipping sector that connects the world and increases equity without creating more environmental damage is challenging because these vehicles must operate disconnected from the electrical grid and have energy requirements that cannot be met by batteries alone. Some of the concepts do not even exist in prototype yet, and none of the appealing options have been implemented at anywhere near the scale required.

      In most cases, we do not know the best way to make the fuel, and for new fuels the vehicles and refueling systems all need to be developed. Also, new fuels, or large-scale use of biomass, will introduce new environmental problems that need to be carefully considered, to ensure that decarbonization solutions do not introduce big new problems.

      Perhaps most difficult are the policy, economic, and equity issues. A new long-haul transportation system will be expensive, and everyone will be affected by the increased cost of shipping freight. To have the desired climate impact, the transport system must change in almost every country. During the transition period, we will need both the existing vehicle and fuel system to keep running smoothly, even as a new low-greenhouse system is introduced. We will also examine what policies could make that work and how we can get countries around the world to agree to implement them. More

    • 150 Shares99 Views

      in Environment

      New maps show airplane contrails over the U.S. dropped steeply in 2020

      by

      As Covid-19’s initial wave crested around the world, travel restrictions and a drop in passengers led to a record number of grounded flights in 2020. The air travel reduction cleared the skies of not just jets but also the fluffy white contrails they produce high in the atmosphere.

      MIT engineers have mapped the contrails that were generated over the United States in 2020, and compared the results to prepandemic years. They found that on any given day in 2018, and again in 2019, contrails covered a total area equal to Massachusetts and Connecticut combined. In 2020, this contrail coverage shrank by about 20 percent, mirroring a similar drop in U.S. flights.  

      While 2020’s contrail dip may not be surprising, the findings are proof that the team’s mapping technique works. Their study marks the first time researchers have captured the fine and ephemeral details of contrails over a large continental scale.

      Now, the researchers are applying the technique to predict where in the atmosphere contrails are likely to form. The cloud-like formations are known to play a significant role in aviation-related global warming. The team is working with major airlines to forecast regions in the atmosphere where contrails may form, and to reroute planes around these regions to minimize contrail production.

      “This kind of technology can help divert planes to prevent contrails, in real time,” says Steven Barrett, professor and associate head of MIT’s Department of Aeronautics and Astronautics. “There’s an unusual opportunity to halve aviation’s climate impact by eliminating most of the contrails produced today.”

      Barrett and his colleagues have published their results today in the journal Environmental Research Letters. His co-authors at MIT include graduate student Vincent Meijer, former graduate student Luke Kulik, research scientists Sebastian Eastham, Florian Allroggen, and Raymond Speth, and LIDS Director and professor Sertac Karaman.

      Trail training

      About half of the aviation industry’s contribution to global warming comes directly from planes’ carbon dioxide emissions. The other half is thought to be a consequence of their contrails. The signature white tails are produced when a plane’s hot, humid exhaust mixes with cool humid air high in the atmosphere. Emitted in thin lines, contrails quickly spread out and can act as blankets that trap the Earth’s outgoing heat.

      While a single contrail may not have much of a warming effect, taken together contrails have a significant impact. But the estimates of this effect are uncertain and based on computer modeling as well as limited satellite data. What’s more, traditional computer vision algorithms that analyze contrail data have a hard time discerning the wispy tails from natural clouds.

      To precisely pick out and track contrails over a large scale, the MIT team looked to images taken by NASA’s GOES-16, a geostationary satellite that hovers over the same swath of the Earth, including the United States, taking continuous, high-resolution images.

      The team first obtained about 100 images taken by the satellite, and trained a set of people to interpret remote sensing data and label each image’s pixel as either part of a contrail or not. They used this labeled dataset to train a computer-vision algorithm to discern a contrail from a cloud or other image feature.

      The researchers then ran the algorithm on about 100,000 satellite images, amounting to nearly 6 trillion pixels, each pixel representing an area of about 2 square kilometers. The images covered the contiguous U.S., along with parts of Canada and Mexico, and were taken about every 15 minutes, between Jan. 1, 2018, and Dec. 31, 2020.

      The algorithm automatically classified each pixel as either a contrail or not a contrail, and generated daily maps of contrails over the United States. These maps mirrored the major flight paths of most U.S. airlines, with some notable differences. For instance, contrail “holes” appeared around major airports, which reflects the fact that planes landing and taking off around airports are generally not high enough in the atmosphere for contrails to form.

      “The algorithm knows nothing about where planes fly, and yet when processing the satellite imagery, it resulted in recognizable flight routes,” Barrett says. “That’s one piece of evidence that says this method really does capture contrails over a large scale.”

      Cloudy patterns

      Based on the algorithm’s maps, the researchers calculated the total area covered each day by contrails in the US. On an average day in 2018 and in 2019, U.S. contrails took up about 43,000 square kilometers. This coverage dropped by 20 percent in March of 2020 as the pandemic set in. From then on, contrails slowly reappeared as air travel resumed through the year.

      The team also observed daily and seasonal patterns. In general, contrails appeared to peak in the morning and decline in the afternoon. This may be a training artifact: As natural cirrus clouds are more likely to form in the afternoon, the algorithm may have trouble discerning contrails amid the clouds later in the day. But it might also be an important indication about when contrails form most. Contrails also peaked in late winter and early spring, when more of the air is naturally colder and more conducive for contrail formation.

      The team has now adapted the technique to predict where contrails are likely to form in real time. Avoiding these regions, Barrett says, could take a significant, almost immediate chunk out of aviation’s global warming contribution.  

      “Most measures to make aviation sustainable take a long time,” Barrett says. “(Contrail avoidance) could be accomplished in a few years, because it requires small changes to how aircraft are flown, with existing airplanes and observational technology. It’s a near-term way of reducing aviation’s warming by about half.”

      The team is now working towards this objective of large-scale contrail avoidance using realtime satellite observations.

      This research was supported in part by NASA and the MIT Environmental Solutions Initiative. More

    • 163 Shares189 Views

      in Energy

      Q&A: Climate Grand Challenges finalists on building equity and fairness into climate solutions

      by

      Note: This is the first in a four-part interview series that will highlight the work of the Climate Grand Challenges finalists, ahead of the April announcement of several multiyear, flagship projects.

      The finalists in MIT’s first-ever Climate Grand Challenges competition each received $100,000 to develop bold, interdisciplinary research and innovation plans designed to attack some of the world’s most difficult and unresolved climate problems. The 27 teams are addressing four Grand Challenge problem areas: building equity and fairness into climate solutions; decarbonizing complex industries and processes; removing, managing, and storing greenhouse gases; and using data and science for improved climate risk forecasting.  

      In a conversation prepared for MIT News, faculty from three of the teams in the competition’s “Building equity and fairness into climate solutions” category share their thoughts on the need for inclusive solutions that prioritize disadvantaged and vulnerable populations, and discuss how they are working to accelerate their research to achieve the greatest impact. The following responses have been edited for length and clarity.

      The Equitable Resilience Framework

      Any effort to solve the most complex global climate problems must recognize the unequal burdens borne by different groups, communities, and societies — and should be equitable as well as effective. Janelle Knox-Hayes, associate professor in the Department of Urban Studies and Planning, leads a team that is developing processes and practices for equitable resilience, starting with a local pilot project in Boston over the next five years and extending to other cities and regions of the country. The Equitable Resilience Framework (ERF) is designed to create long-term economic, social, and environmental transformations by increasing the capacity of interconnected systems and communities to respond to a broad range of climate-related events. 

      Q: What is the problem you are trying to solve?

      A: Inequity is one of the severe impacts of climate change and resonates in both mitigation and adaptation efforts. It is important for climate strategies to address challenges of inequity and, if possible, to design strategies that enhance justice, equity, and inclusion, while also enhancing the efficacy of mitigation and adaptation efforts. Our framework offers a blueprint for how communities, cities, and regions can begin to undertake this work.

      Q: What are the most significant barriers that have impacted progress to date?

      A: There is considerable inertia in policymaking. Climate change requires a rethinking, not only of directives but pathways and techniques of policymaking. This is an obstacle and part of the reason our project was designed to scale up from local pilot projects. Another consideration is that the private sector can be more adaptive and nimble in its adoption of creative techniques. Working with the MIT Climate and Sustainability Consortium there may be ways in which we could modify the ERF to help companies address similar internal adaptation and resilience challenges.

      Protecting and enhancing natural carbon sinks

      Deforestation and forest degradation of strategic ecosystems in the Amazon, Central Africa, and Southeast Asia continue to reduce capacity to capture and store carbon through natural systems and threaten even the most aggressive decarbonization plans. John Fernandez, professor in the Department of Architecture and director of the Environmental Solutions Initiative, reflects on his work with Daniela Rus, professor of electrical engineering and computer science and director of the Computer Science and Artificial Intelligence Laboratory, and Joann de Zegher, assistant professor of Operations Management at MIT Sloan, to protect tropical forests by deploying a three-part solution that integrates targeted technology breakthroughs, deep community engagement, and innovative bioeconomic opportunities. 

      Q: Why is the problem you seek to address a “grand challenge”?

      A: We are trying to bring the latest technology to monitoring, assessing, and protecting tropical forests, as well as other carbon-rich and highly biodiverse ecosystems. This is a grand challenge because natural sinks around the world are threatening to release enormous quantities of stored carbon that could lead to runaway global warming. When combined with deep community engagement, particularly with indigenous and afro-descendant communities, this integrated approach promises to deliver substantially enhanced efficacy in conservation coupled to robust and sustainable local development.

      Q: What is known about this problem and what questions remain unanswered?

      A: Satellites, drones, and other technologies are acquiring more data about natural carbon sinks than ever before. The problem is well-described in certain locations such as the eastern Amazon, which has shifted from a net carbon sink to now a net positive carbon emitter. It is also well-known that indigenous peoples are the most effective stewards of the ecosystems that store the greatest amounts of carbon. One of the key questions that remains to be answered is determining the bioeconomy opportunities inherent within the natural wealth of tropical forests and other important ecosystems that are important to sustained protection and conservation.

      Reducing group-based disparities in climate adaptation

      Race, ethnicity, caste, religion, and nationality are often linked to vulnerability to the adverse effects of climate change, and if left unchecked, threaten to exacerbate long standing inequities. A team led by Evan Lieberman, professor of political science and director of the MIT Global Diversity Lab and MIT International Science and Technology Initiatives, Danielle Wood, assistant professor in the Program in Media Arts and Sciences and the Department of Aeronautics and Astronautics, and Siqi Zheng, professor of urban and real estate sustainability in the Center for Real Estate and the Department of Urban Studies and Planning, is seeking to  reduce ethnic and racial group-based disparities in the capacity of urban communities to adapt to the changing climate. Working with partners in nine coastal cities, they will measure the distribution of climate-related burdens and resiliency through satellites, a custom mobile app, and natural language processing of social media, to help design and test communication campaigns that provide accurate information about risks and remediation to impacted groups. 

      Q: How has this problem evolved?

      A: Group-based disparities continue to intensify within and across countries, owing in part to some randomness in the location of adverse climate events, as well as deep legacies of unequal human development. In turn, economically and politically privileged groups routinely hoard resources for adaptation. In a few cases — notably the United States, Brazil, and with respect to climate-related migrancy, in South Asia — there has been a great deal of research documenting the extent of such disparities. However, we lack common metrics, and for the most part, such disparities are only understood where key actors have politicized the underlying problems. In much of the world, relatively vulnerable and excluded groups may not even be fully aware of the nature of the challenges they face or the resources they require.

      Q: Who will benefit most from your research? 

      A: The greatest beneficiaries will be members of those vulnerable groups who lack the resources and infrastructure to withstand adverse climate shocks. We believe that it will be important to develop solutions such that relatively privileged groups do not perceive them as punitive or zero-sum, but rather as long-term solutions for collective benefit that are both sound and just. More