Magnets

Subterms

    More stories

    • 100 Shares129 Views

      in Energy

      Finding the questions that guide MIT fusion research

      by

      “One of the things I learned was, doing good science isn’t so much about finding the answers as figuring out what the important questions are.”

      As Martin Greenwald retires from the responsibilities of senior scientist and deputy director of the MIT Plasma Science and Fusion Center (PSFC), he reflects on his almost 50 years of science study, 43 of them as a researcher at MIT, pursuing the question of how to make the carbon-free energy of fusion a reality.

      Most of Greenwald’s important questions about fusion began after graduating from MIT with a BS in both physics and chemistry. Beginning graduate work at the University of California at Berkeley, he felt compelled to learn more about fusion as an energy source that could have “a real societal impact.” At the time, researchers were exploring new ideas for devices that could create and confine fusion plasmas. Greenwald worked on Berkeley’s “alternate concept” TORMAC, a Toroidal Magnetic Cusp. “It didn’t work out very well,” he laughs. “The first thing I was known for was making the measurements that shut down the program.”

      Believing the temperature of the plasma generated by the device would not be as high as his group leader expected, Greenwald developed hardware that could measure the low temperatures predicted by his own “back of the envelope calculations.” As he anticipated, his measurements showed that “this was not a fusion plasma; this was hardly a confined plasma at all.”

      With a PhD from Berkeley, Greenwald returned to MIT for a research position at the PSFC, attracted by the center’s “esprit de corps.”

      He arrived in time to participate in the final experiments on Alcator A, the first in a series of tokamaks built at MIT, all characterized by compact size and featuring high-field magnets. The tokamak design was then becoming favored as the most effective route to fusion: its doughnut-shaped vacuum chamber, surrounded by electromagnets, could confine the turbulent plasma long enough, while increasing its heat and density, to make fusion occur.

      Alcator A showed that the energy confinement time improves in relation to increasing plasma density. MIT’s succeeding device, Alcator C, was designed to use higher magnetic fields, boosting expectations that it would reach higher densities and better confinement. To attain these goals, however, Greenwald had to pursue a new technique that increased density by injecting pellets of frozen fuel into the plasma, a method he likens to throwing “snowballs in hell.” This work was notable for the creation of a new regime of enhanced plasma confinement on Alcator C. In those experiments, a confined plasma surpassed for the first time one of the two Lawson criteria — the minimum required value for the product of the plasma density and confinement time — for making net power from fusion. This had been a milestone for fusion research since their publication by John Lawson in 1957.

      Greenwald continued to make a name for himself as part of a larger study into the physics of the Compact Ignition Tokamak — a high-field burning plasma experiment that the U.S. program was proposing to build in the late 1980s. The result, unexpectedly, was a new scaling law, later known as the “Greenwald Density Limit,” and a new theory for the mechanism of the limit. It has been used to accurately predict performance on much larger machines built since.

      The center’s next tokamak, Alcator C-Mod, started operation in 1993 and ran for more than 20 years, with Greenwald as the chair of its Experimental Program Committee. Larger than Alcator C, the new device supported a highly shaped plasma, strong radiofrequency heating, and an all-metal plasma-facing first wall. All of these would eventually be required in a fusion power system.

      C-Mod proved to be MIT’s most enduring fusion experiment to date, producing important results for 20 years. During that time Greenwald contributed not only to the experiments, but to mentoring the next generation. Research scientist Ryan Sweeney notes that “Martin quickly gained my trust as a mentor, in part due to his often casual dress and slightly untamed hair, which are embodiments of his transparency and his focus on what matters. He can quiet a room of PhDs and demand attention not by intimidation, but rather by his calmness and his ability to bring clarity to complicated problems, be they scientific or human in nature.”

      Greenwald worked closely with the group of students who, in PSFC Director Dennis Whyte’s class, came up with the tokamak concept that evolved into SPARC. MIT is now pursuing this compact, high-field tokamak with Commonwealth Fusion Systems, a startup that grew out of the collective enthusiasm for this concept, and the growing realization it could work. Greenwald now heads the Physics Group for the SPARC project at MIT. He has helped confirm the device’s physics basis in order to predict performance and guide engineering decisions.

      “Martin’s multifaceted talents are thoroughly embodied by, and imprinted on, SPARC” says Whyte. “First, his leadership in its plasma confinement physics validation and publication place SPARC on a firm scientific footing. Secondly, the impact of the density limit he discovered, which shows that fuel density increases with magnetic field and decreasing the size of the tokamak, is critical in obtaining high fusion power density not just in SPARC, but in future power plants. Third, and perhaps most impressive, is Martin’s mentorship of the SPARC generation of leadership.”

      Greenwald’s expertise and easygoing personality have made him an asset as head of the PSFC Office for Computer Services and group leader for data acquisition and computing, and sought for many professional committees. He has been an APS Fellow since 2000, and was an APS Distinguished Lecturer in Plasma Physics (2001-02). He was also presented in 2014 with a Leadership Award from Fusion Power Associates. He is currently an associate editor for Physics of Plasmas and a member of the Lawrence Livermore National Laboratory Physical Sciences Directorate External Review Committee.

      Although leaving his full-time responsibilities, Greenwald will remain at MIT as a visiting scientist, a role he says will allow him to “stick my nose into everything without being responsible for anything.”

      “At some point in the race you have to hand off the baton,“ he says. “And it doesn’t mean you’re not interested in the outcome; and it doesn’t mean you’re just going to walk away into the stands. I want to be there at the end when we succeed.” More

    • 63 Shares169 Views

      in Energy

      Finding her way to fusion

      by

      “I catch myself startling people in public.”

      Zoe Fisher’s animated hands carry part of the conversation as she describes how her naturally loud and expressive laughter turned heads in the streets of Yerevan. There during MIT’s Independent Activities period (IAP), she was helping teach nuclear science at the American University of Armenia, before returning to MIT to pursue fusion research at the Plasma Science and Fusion Center (PSFC).

      Startling people may simply be in Fisher’s DNA. She admits that when she first arrived at MIT, knowing nothing about nuclear science and engineering (NSE), she chose to join that department’s Freshman Pre-Orientation Program (FPOP) “for the shock value.” It was a choice unexpected by family, friends, and mostly herself. Now in her senior year, a 2021 recipient of NSE’s Irving Kaplan Award for academic achievements by a junior and entering a fifth-year master of science program in nuclear fusion, Fisher credits that original spontaneous impulse for introducing her to a subject she found so compelling that, after exploring multiple possibilities, she had to return to it.

      Fisher’s venture to Armenia, under the guidance of NSE associate professor Areg Danagoulian, is not the only time she has taught oversees with MISTI’s Global Teaching Labs, though it is the first time she has taught nuclear science, not to mention thermodynamics and materials science. During IAP 2020 she was a student teacher at a German high school, teaching life sciences, mathematics, and even English to grades five through 12. And after her first year she explored the transportation industry with a mechanical engineering internship in Tuscany, Italy.

      By the time she was ready to declare her NSE major she had sampled the alternatives both overseas and at home, taking advantage of MIT’s Undergraduate Research Opportunities Program (UROP). Drawn to fusion’s potential as an endless source of carbon-free energy on earth, she decided to try research at the PSFC, to see if the study was a good fit. 

      Much fusion research at MIT has favored heating hydrogen fuel inside a donut-shaped device called a tokamak, creating plasma that is hot and dense enough for fusion to occur. Because plasma will follow magnetic field lines, these devices are wrapped with magnets to keep the hot fuel from damaging the chamber walls.

      Fisher was assigned to SPARC, the PSFC’s new tokamak collaboration with MIT startup Commonwealth Fusion Systems (CSF), which uses a game-changing high-temperature superconducting (HTS) tape to create fusion magnets that minimize tokamak size and maximize performance. Working on a database reference book for SPARC materials, she was finding purpose even in the most repetitive tasks. “Which is how I knew I wanted to stay in fusion,” she laughs.

      Fisher’s latest UROP assignment takes her — literally — deeper into SPARC research. She works in a basement laboratory in building NW13 nicknamed “The Vault,” on a proton accelerator whose name conjures an underworld: DANTE. Supervised by PSFC Director Dennis Whyte and postdoc David Fischer, she is exploring the effects of radiation damage on the thin HTS tape that is key to SPARC’s design, and ultimately to the success of ARC, a prototype working fusion power plant.

      Because repetitive bombardment with neutrons produced during the fusion process can diminish the superconducting properties of the HTS, it is crucial to test the tape repeatedly. Fisher assists in assembling and testing the experimental setups for irradiating the HTS samples. Fisher recalls her first project was installing a “shutter” that would allow researchers to control exactly how much radiation reached the tape without having to turn off the entire experiment.

      “You could just push the button — block the radiation — then unblock it. It sounds super simple, but it took many trials. Because first I needed the right size solenoid, and then I couldn’t find a piece of metal that was small enough, and then we needed cryogenic glue…. To this day the actual final piece is made partially of paper towels.”

      She shrugs and laughs. “It worked, and it was the cheapest option.”

      Fisher is always ready to find the fun in fusion. Referring to DANTE as “A really cool dude,” she admits, “He’s perhaps a bit fickle. I may or may not have broken him once.” During a recent IAP seminar, she joined other PSFC UROP students to discuss her research, and expanded on how a mishap can become a gateway to understanding.

      “The grad student I work with and I got to repair almost the entire internal circuit when we blew the fuse — which originally was a really bad thing. But it ended up being great because we figured out exactly how it works.”

      Fisher’s upbeat spirit makes her ideal not only for the challenges of fusion research, but for serving the MIT community. As a student representative for NSE’s Diversity, Equity and Inclusion Committee, she meets monthly with the goal of growing and supporting diversity within the department.

      “This opportunity is impactful because I get my voice, and the voices of my peers, taken seriously,” she says. “Currently, we are spending most of our efforts trying to identify and eliminate hurdles based on race, ethnicity, gender, and income that prevent people from pursuing — and applying to — NSE.”

      To break from the lab and committees, she explores the Charles River as part of MIT’s varsity sailing team, refusing to miss a sunset. She also volunteers as an FPOP mentor, seeking to provide incoming first-years with the kind of experience that will make them want to return to the topic, as she did.

      She looks forward to continuing her studies on the HTS tapes she has been irradiating, proposing to send a current pulse above the critical current through the tape, to possibly anneal any defects from radiation, which would make repairs on future fusion power plants much easier.

      Fisher credits her current path to her UROP mentors and their infectious enthusiasm for the carbon-free potential of fusion energy.

      “UROPing around the PSFC showed me what I wanted to do with my life,” she says. “Who doesn’t want to save the world?” More

    • 113 Shares149 Views

      in Energy

      Tuning in to invisible waves on the JET tokamak

      by

      Research scientist Alex Tinguely is readjusting to Cambridge and Boston.

      As a postdoc with the Plasma Science and Fusion Center (PSFC), the MIT graduate spent the last two years in Oxford, England, a city he recalls can be traversed entirely “in the time it takes to walk from MIT to Harvard.” With its ancient stone walls, cathedrals, cobblestone streets, and winding paths, that small city was his home base for a big project: JET, a tokamak that is currently the largest operating magnetic fusion energy experiment in the world.

      Located at the Culham Center for Fusion Energy (CCFE), part of the U.K. Atomic Energy Authority, this key research center of the European Fusion Program has recently announced historic success. Using a 50-50 deuterium-tritium fuel mixture for the first time since 1997, JET established a fusion power record of 10 megawatts output over five seconds. It produced 59 megajoules of fusion energy, more than doubling the 22 megajoule record it set in 1997. As a member of the JET Team, Tinguely has overseen the measurement and instrumentation systems (diagnostics) contributed by the MIT group.

      A lucky chance

      The postdoctoral opportunity arose just as Tinguely was graduating with a PhD in physics from MIT. Managed by Professor Miklos Porkolab as the principal investigator for over 20 years, this postdoctoral program has prepared multiple young researchers for careers in fusion facilities around the world. The collaborative research provided Tinguely the chance to work on a fusion device that would be adding tritium to the usual deuterium fuel.

      Fusion, the process that fuels the sun and other stars, could provide a long-term source of carbon-free power on Earth, if it can be harnessed. For decades researchers have tried to create an artificial star in a doughnut-shaped bottle, or “tokamak,” using magnetic fields to keep the turbulent plasma fuel confined and away from the walls of its container long enough for fusion to occur.

      In his graduate student days at MIT, Tinguely worked on the PSFC’s Alcator C-Mod tokamak, now decommissioned, which, like most magnetic fusion devices, used deuterium to create the plasmas for experiments. JET, since beginning operation in 1983, has done the same, later joining a small number of facilities that added tritium, a radioactive isotope of hydrogen. While this addition increases the amount of fusion, it also creates much more radiation and activation.

      Tinguely considers himself fortunate to have been placed at JET.

      “There aren’t that many operating tokamaks in the U.S. right now,” says Tinguely, “not to mention one that would be running deuterium-tritium (DT), which hasn’t been run for over 20 years, and which would be making some really important measurements. I got a very lucky spot where I was an MIT postdoc, but I lived in Oxford, working on a very international project.”

      Strumming magnetic field lines

      The measurements that interest Tinguely are of low-frequency electromagnetic waves in tokamak plasmas. Tinguely uses an antenna diagnostic developed by MIT, EPFL Swiss Plasma Center, and CCFE to probe the so-called Alfvén eigenmodes when they are stable, before the energetic alpha particles produced by DT fusion plasmas can drive them toward instability.

      What makes MIT’s “Alfvén Eigenmode Active Diagnostic” essential is that without it researchers cannot see, or measure, stable eigenmodes. Unstable modes show up clearly as magnetic fluctuations in the data, but stable waves are invisible without prompting from the antenna. These measurements help researchers understand the physics of Alfvén waves and their potential for degrading fusion performance, providing insights that will be increasingly important for future DT fusion devices.

      Tinguely likens the diagnostic to fingers on guitar strings.

      “The magnetic field lines in the tokamak are like guitar strings. If you have nothing to give energy to the strings — or give energy to the waves of the magnetic field lines — they just sit there, they don’t do anything. The energetic plasma particles can essentially ‘play the guitar strings,’ strum the magnetic field lines of the plasma, and that’s when you can see the waves in your plasma. But if the energetic particle drive of the waves is not strong enough you won’t see them, so you need to come along and ‘pluck the strings’ with our antenna. And that’s how you learn some information about the waves.”

      Much of Tinguely’s experience on JET took place during the Covid-19 pandemic, when off-site operation and analysis were the norm. However, because the MIT diagnostic needed to be physically turned on and off, someone from Tinguely’s team needed to be on site twice a day, a routine that became even less convenient when tritium was introduced.

      “When you have deuterium and tritium, you produce a lot of neutrons. So, some of the buildings became off-limits during operation, which meant they had to be turned on really early in the morning, like 6:30 a.m., and then turned off very late at night, around 10:30 p.m.”

      Looking to the future

      Now a research scientist at the PSFC, Tinguely continues to work at JET remotely. He sometimes wishes he could again ride that train from Oxford to Culham — which he fondly remembers for its clean, comfortable efficiency — to see work colleagues and to visit local friends. The life he created for himself in England included practice and performance with the 125-year-old Oxford Bach Choir, as well as weekly dinner service at The Gatehouse, a facility that offers free support for the local homeless and low-income communities.

      “Being back is exciting too,” he says. “It’s fun to see how things have changed, how people and projects have grown, what new opportunities have arrived.”

      He refers specifically to a project that is beginning to take up more of his time: SPARC, the tokamak the PSFC supports in collaboration with Commonwealth Fusion Systems. Designed to use deuterium-tritium to make net fusion gains, SPARC will be able to use the latest research on JET to advantage. Tinguely is already exploring how his expertise with Alfvén eigenmodes can support the experiment.

      “I actually had an opportunity to do my PhD — or DPhil as they would call it — at Oxford University, but I went to MIT for grad school instead,” Tinguely reveals. “So, this is almost like closure, in a sense. I got to have my Oxford experience in the end, just in a different way, and have the MIT experience too.”

      He adds, “And I see myself being here at MIT for some time.” More

    • 163 Shares169 Views

      in Energy

      Seeing the plasma edge of fusion experiments in new ways with artificial intelligence

      by

      To make fusion energy a viable resource for the world’s energy grid, researchers need to understand the turbulent motion of plasmas: a mix of ions and electrons swirling around in reactor vessels. The plasma particles, following magnetic field lines in toroidal chambers known as tokamaks, must be confined long enough for fusion devices to produce significant gains in net energy, a challenge when the hot edge of the plasma (over 1 million degrees Celsius) is just centimeters away from the much cooler solid walls of the vessel.

      Abhilash Mathews, a PhD candidate in the Department of Nuclear Science and Engineering working at MIT’s Plasma Science and Fusion Center (PSFC), believes this plasma edge to be a particularly rich source of unanswered questions. A turbulent boundary, it is central to understanding plasma confinement, fueling, and the potentially damaging heat fluxes that can strike material surfaces — factors that impact fusion reactor designs.

      To better understand edge conditions, scientists focus on modeling turbulence at this boundary using numerical simulations that will help predict the plasma’s behavior. However, “first principles” simulations of this region are among the most challenging and time-consuming computations in fusion research. Progress could be accelerated if researchers could develop “reduced” computer models that run much faster, but with quantified levels of accuracy.

      For decades, tokamak physicists have regularly used a reduced “two-fluid theory” rather than higher-fidelity models to simulate boundary plasmas in experiment, despite uncertainty about accuracy. In a pair of recent publications, Mathews begins directly testing the accuracy of this reduced plasma turbulence model in a new way: he combines physics with machine learning.

      “A successful theory is supposed to predict what you’re going to observe,” explains Mathews, “for example, the temperature, the density, the electric potential, the flows. And it’s the relationships between these variables that fundamentally define a turbulence theory. What our work essentially examines is the dynamic relationship between two of these variables: the turbulent electric field and the electron pressure.”

      In the first paper, published in Physical Review E, Mathews employs a novel deep-learning technique that uses artificial neural networks to build representations of the equations governing the reduced fluid theory. With this framework, he demonstrates a way to compute the turbulent electric field from an electron pressure fluctuation in the plasma consistent with the reduced fluid theory. Models commonly used to relate the electric field to pressure break down when applied to turbulent plasmas, but this one is robust even to noisy pressure measurements.

      In the second paper, published in Physics of Plasmas, Mathews further investigates this connection, contrasting it against higher-fidelity turbulence simulations. This first-of-its-kind comparison of turbulence across models has previously been difficult — if not impossible — to evaluate precisely. Mathews finds that in plasmas relevant to existing fusion devices, the reduced fluid model’s predicted turbulent fields are consistent with high-fidelity calculations. In this sense, the reduced turbulence theory works. But to fully validate it, “one should check every connection between every variable,” says Mathews.

      Mathews’ advisor, Principal Research Scientist Jerry Hughes, notes that plasma turbulence is notoriously difficult to simulate, more so than the familiar turbulence seen in air and water. “This work shows that, under the right set of conditions, physics-informed machine-learning techniques can paint a very full picture of the rapidly fluctuating edge plasma, beginning from a limited set of observations. I’m excited to see how we can apply this to new experiments, in which we essentially never observe every quantity we want.”

      These physics-informed deep-learning methods pave new ways in testing old theories and expanding what can be observed from new experiments. David Hatch, a research scientist at the Institute for Fusion Studies at the University of Texas at Austin, believes these applications are the start of a promising new technique.

      “Abhi’s work is a major achievement with the potential for broad application,” he says. “For example, given limited diagnostic measurements of a specific plasma quantity, physics-informed machine learning could infer additional plasma quantities in a nearby domain, thereby augmenting the information provided by a given diagnostic. The technique also opens new strategies for model validation.”

      Mathews sees exciting research ahead.

      “Translating these techniques into fusion experiments for real edge plasmas is one goal we have in sight, and work is currently underway,” he says. “But this is just the beginning.”

      Mathews was supported in this work by the Manson Benedict Fellowship, Natural Sciences and Engineering Research Council of Canada, and U.S. Department of Energy Office of Science under the Fusion Energy Sciences program.​ More

    • 88 Shares189 Views

      in Energy

      Helping to make nuclear fusion a reality

      by

      Up until she served in the Peace Corps in Malawi, Rachel Bielajew was open to a career reboot. Having studied nuclear engineering as an undergraduate at the University of Michigan at Ann Arbor, graduate school had been on her mind. But seeing the drastic impacts of climate change play out in real-time in Malawi — the lives of the country’s subsistence farmers swing wildly, depending on the rains — convinced Bielajew of the importance of nuclear engineering. Bielajew was struck that her high school students in the small town of Chisenga had a shaky understanding of math, but universally understood global warming. “The concept of the changing world due to human impact was evident, and they could see it,” Bielajew says.

      Bielajew was looking to work on solutions that could positively impact global problems and feed her love of physics. Nuclear engineering, especially the study of fusion as a carbon-free energy source, checked off both boxes. Bielajew is now a fourth-year doctoral candidate in the Department of Nuclear Science and Engineering (NSE). She researches magnetic confinement fusion in the Plasma Science and Fusion Center (PSFC) with Professor Anne White.

      Researching fusion’s big challenge

      You need to confine plasma effectively in order to generate the extremely high temperatures (100 million degrees Celsius) fusion needs, without melting the walls of the tokamak, the device that hosts these reactions. Magnets can do the job, but “plasmas are weird, they behave strangely and are challenging to understand,” Bielajew says. Small instabilities in plasma can coalesce into fluctuating turbulence that can drive heat and particles out of the machine.

      In high-confinement mode, the edges of the plasma have less tolerance for such unruly behavior. “The turbulence gets damped out and sheared apart at the edge,” Bielajew says. This might seem like a good thing, but high-confinement plasmas have their own challenges. They are so tightly bound that they create edge-localized modes (ELMs), bursts of damaging particles and energy, that can be extremely damaging to the machine.

      The questions Bielajew is looking to answer: How do we get high confinement without ELMs? How do turbulence and transport play a role in plasmas? “We do not fully understand turbulence, even though we have studied it for a long time,” Bielajew says, “It is a big and important problem to solve for fusion to be a reality. I like that challenge,” Bielajew adds.

      A love of science

      Confronting such challenges head-on has been part of Bielajew’s toolkit since she was a child growing up in Ann Arbor, Michigan. Her father, Alex Bielajew, is a professor of nuclear engineering at the University of Michigan, and Bielajew’s mother also pursued graduate studies.

      Bielajew’s parents encouraged her to follow her own path and she found it led to her father’s chosen profession: nuclear engineering. Once she decided to pursue research in fusion, MIT stood out as a school she could set her sights on. “I knew that MIT had an extensive program in fusion and a lot of faculty in the field,” Bielajew says. The mechanics of the application were challenging: Chisenga had limited internet access, so Bielajew had to ride on the back of a pickup truck to meet a friend in a city a few hours away and use his phone as a hotspot to send the documents.

      A similar tenacity has surfaced in Bielajew’s approach to research during the Covid-19 pandemic. Working off a blueprint, Bielajew built the Correlation Cyclotron Emission Diagnostic, which measures turbulent electron temperature fluctuations. Through a collaboration, Bielajew conducts her plasma research at the ASDEX Upgrade tokamak in Germany. Traditionally, Bielajew would ship the diagnostic to Germany, follow and install it, and conduct the research in person. The pandemic threw a wrench in the plans, so Bielajew shipped the diagnostic and relied on team members to install it. She Zooms into the control room and trusts others to run the plasma experiments.

      DEI advocate

      Bielajew is very hands-on with another endeavor: improving diversity, equity, and inclusion (DEI) in her own backyard. Having grown up with parental encouragement and in an environment that never doubted her place as a woman in engineering, Bielajew realizes not everyone has the same opportunities. “I wish that the world was in a place where all I had to do was care about my research, but it’s not,” Bielajew says. While science can solve many problems, more fundamental ones about equity need humans to act in specific ways, she points out. “I want to see more women represented, more people of color. Everyone needs a voice in building a better world,” Bielajew says.

      To get there, Bielajew co-launched NSE’s Graduate Application Assistance Program, which connects underrepresented student applicants with NSE mentors. She has been the DEI officer with NSE’s student group, ANS, and is very involved in the department’s DEI committee.

      As for future research, Bielajew hopes to concentrate on the experiments that make her question existing paradigms about plasmas under high confinement. Bielajew has registered more head-scratching “hmm” moments than “a-ha” ones. Measurements from her experiments drive the need for more intensive study.

      Bielajew’s dogs, Dobby and Winky, keep her company through it all. They came home with her from Malawi. More

    • 75 Shares99 Views

      in Energy

      Radio-frequency wave scattering improves fusion simulations

      by

      In the quest for fusion energy, understanding how radio-frequency (RF) waves travel (or “propagate”) in the turbulent interior of a fusion furnace is crucial to maintaining an efficient, continuously operating power plant. Transmitted by an antenna in the doughnut-shaped vacuum chamber common to magnetic confinement fusion devices called tokamaks, RF waves heat the plasma fuel and drive its current around the toroidal interior. The efficiency of this process can be affected by how the wave’s trajectory is altered (or “scattered”) by conditions within the chamber.

      Researchers have tried to study these RF processes using computer simulations to match the experimental conditions. A good match would validate the computer model, and raise confidence in using it to explore new physics and design future RF antennas that perform efficiently. While the simulations can accurately calculate how much total current is driven by RF waves, they do a poor job at predicting where exactly in the plasma this current is produced.

      Now, in a paper published in the Journal of Plasma Physics, MIT researchers suggest that the models for RF wave propagation used for these simulations have not properly taken into account the way these waves are scattered as they encounter dense, turbulent filaments present in the edge of the plasma known as the “scrape-off layer” (SOL).

      Bodhi Biswas, a graduate student at the Plasma Science and Fusion Center (PSFC) under the direction of Senior Research Scientist Paul Bonoli, School of Engineering Distinguished Professor of Engineering Anne White, and Principal Research Scientist Abhay Ram, who is the paper’s lead author. Ram compares the scattering that occurs in this situation to a wave of water hitting a lily pad: “The wave crashing with the lily pad will excite a secondary, scattered wave that makes circular ripples traveling outward from the plant. The incoming wave has transferred energy to the scattered wave. Some of this energy is reflected backwards (in relation to the incoming wave), some travels forwards, and some is deflected to the side. The specifics all depend on the particular attributes of the wave, the water, and the lily pad. In our case, the lily pad is the plasma filament.”

      Until now, researchers have not properly taken these filaments and the scattering they provoke into consideration when modeling the turbulence inside a tokamak, leading to an underestimation of wave scattering. Using data from PSFC tokamak Alcator C-Mod, Biswas shows that using the new method of modeling RF-wave scattering from SOL turbulence provides results considerably different from older models, and a much better match to experiments. Notably, the “lower-hybrid” wave spectrum, crucial to driving plasma current in a steady-state tokamak, appears to scatter asymmetrically, an important effect not accounted for in previous models.

      Biswas’s advisor Paul Bonoli is well acquainted with traditional “ray-tracing” models, which evaluate a wave trajectory by dividing it into a series of rays. He has used this model, with its limitations, for decades in his own research to understand plasma behavior. Bonoli says he is pleased that “the research results in Bodhi’s doctoral thesis have refocused attention on the profound effect that edge turbulence can have on the propagation and absorption of radio-frequency power.”

      Although ray-tracing treatments of scattering do not fully capture all the wave physics, a “full-wave” model that does would be prohibitively expensive. To solve the problem economically, Biswas splits his analysis into two parts: (1) using ray tracing to model the trajectory of the wave in the tokamak assuming no turbulence, while (2) modifying this ray-trajectory with the new scattering model that accounts for the turbulent plasma filaments.

      “This scattering model is a full-wave model, but computed over a small region and in a simplified geometry so that it is very quick to do,” says Biswas. “The result is a ray-tracing model that, for the first time, accounts for full-wave scattering physics.”

      Biswas notes that this model bridges the gap between simple scattering models that fail to match experiment and full-wave models that are prohibitively expensive, providing reasonable accuracy at low cost.

      “Our results suggest scattering is an important effect, and that it must be taken into account when designing future RF antennas. The low cost of our scattering model makes this very doable.”

      “This is exciting progress,” says Syun’ichi Shiraiwa, staff research physicist at the Princeton Plasma Physics Laboratory. “I believe that Bodhi’s work provides a clear path to the end of a long tunnel we have been in. His work not only demonstrates that the wave scattering, once accurately accounted for, can explain the experimental results, but also answers a puzzling question: why previous scattering models were incomplete, and their results unsatisfying.”

      Work is now underway to apply this model to more plasmas from Alcator C-Mod and other tokamaks. Biswas believes that this new model will be particularly applicable to high-density tokamak plasmas, for which the standard ray-tracing model has been noticeably inaccurate. He is also excited that the model could be validated by DIII-D National Fusion Facility, a fusion experiment on which the PSFC collaborates.

      “The DIII-D tokamak will soon be capable of launching lower hybrid waves and measuring its electric field in the scrape-off layer. These measurements could provide direct evidence of the asymmetric scattering effect predicted by our model.” More

    • 100 Shares149 Views

      in Energy

      MIT-designed project achieves major advance toward fusion energy

      by

      It was a moment three years in the making, based on intensive research and design work: On Sept. 5, for the first time, a large high-temperature superconducting electromagnet was ramped up to a field strength of 20 tesla, the most powerful magnetic field of its kind ever created on Earth. That successful demonstration helps resolve the greatest uncertainty in the quest to build the world’s first fusion power plant that can produce more power than it consumes, according to the project’s leaders at MIT and startup company Commonwealth Fusion Systems (CFS).

      That advance paves the way, they say, for the long-sought creation of practical, inexpensive, carbon-free power plants that could make a major contribution to limiting the effects of global climate change.

      “Fusion in a lot of ways is the ultimate clean energy source,” says Maria Zuber, MIT’s vice president for research and E. A. Griswold Professor of Geophysics. “The amount of power that is available is really game-changing.” The fuel used to create fusion energy comes from water, and “the Earth is full of water — it’s a nearly unlimited resource. We just have to figure out how to utilize it.”

      Developing the new magnet is seen as the greatest technological hurdle to making that happen; its successful operation now opens the door to demonstrating fusion in a lab on Earth, which has been pursued for decades with limited progress. With the magnet technology now successfully demonstrated, the MIT-CFS collaboration is on track to build the world’s first fusion device that can create and confine a plasma that produces more energy than it consumes. That demonstration device, called SPARC, is targeted for completion in 2025.

      “The challenges of making fusion happen are both technical and scientific,” says Dennis Whyte, director of MIT’s Plasma Science and Fusion Center, which is working with CFS to develop SPARC. But once the technology is proven, he says, “it’s an inexhaustible, carbon-free source of energy that you can deploy anywhere and at any time. It’s really a fundamentally new energy source.”

      Whyte, who is the Hitachi America Professor of Engineering, says this week’s demonstration represents a major milestone, addressing the biggest questions remaining about the feasibility of the SPARC design. “It’s really a watershed moment, I believe, in fusion science and technology,” he says.

      The sun in a bottle

      Fusion is the process that powers the sun: the merger of two small atoms to make a larger one, releasing prodigious amounts of energy. But the process requires temperatures far beyond what any solid material could withstand. To capture the sun’s power source here on Earth, what’s needed is a way of capturing and containing something that hot — 100,000,000 degrees or more — by suspending it in a way that prevents it from coming into contact with anything solid.

      That’s done through intense magnetic fields, which form a kind of invisible bottle to contain the hot swirling soup of protons and electrons, called a plasma. Because the particles have an electric charge, they are strongly controlled by the magnetic fields, and the most widely used configuration for containing them is a donut-shaped device called a tokamak. Most of these devices have produced their magnetic fields using conventional electromagnets made of copper, but the latest and largest version under construction in France, called ITER, uses what are known as low-temperature superconductors.

      The major innovation in the MIT-CFS fusion design is the use of high-temperature superconductors, which enable a much stronger magnetic field in a smaller space. This design was made possible by a new kind of superconducting material that became commercially available a few years ago. The idea initially arose as a class project in a nuclear engineering class taught by Whyte. The idea seemed so promising that it continued to be developed over the next few iterations of that class, leading to the ARC power plant design concept in early 2015. SPARC, designed to be about half the size of ARC, is a testbed to prove the concept before construction of the full-size, power-producing plant.

      Until now, the only way to achieve the colossally powerful magnetic fields needed to create a magnetic “bottle” capable of containing plasma heated up to hundreds of millions of degrees was to make them larger and larger. But the new high-temperature superconductor material, made in the form of a flat, ribbon-like tape, makes it possible to achieve a higher magnetic field in a smaller device, equaling the performance that would be achieved in an apparatus 40 times larger in volume using conventional low-temperature superconducting magnets. That leap in power versus size is the key element in ARC’s revolutionary design.

      The use of the new high-temperature superconducting magnets makes it possible to apply decades of experimental knowledge gained from the operation of tokamak experiments, including MIT’s own Alcator series. The new approach, led by Zach Hartwig, the MIT principal investigator and the Robert N. Noyce Career Development Assistant Professor of Nuclear Science and Engineering, uses a well-known design but scales everything down to about half the linear size and still achieves the same operational conditions because of the higher magnetic field.

      A series of scientific papers published last year outlined the physical basis and, by simulation, confirmed the viability of the new fusion device. The papers showed that, if the magnets worked as expected, the whole fusion system should indeed produce net power output, for the first time in decades of fusion research.

      Martin Greenwald, deputy director and senior research scientist at the PSFC, says unlike some other designs for fusion experiments, “the niche that we were filling was to use conventional plasma physics, and conventional tokamak designs and engineering, but bring to it this new magnet technology. So, we weren’t requiring innovation in a half-dozen different areas. We would just innovate on the magnet, and then apply the knowledge base of what’s been learned over the last decades.”

      That combination of scientifically established design principles and game-changing magnetic field strength is what makes it possible to achieve a plant that could be economically viable and developed on a fast track. “It’s a big moment,” says Bob Mumgaard, CEO of CFS. “We now have a platform that is both scientifically very well-advanced, because of the decades of research on these machines, and also commercially very interesting. What it does is allow us to build devices faster, smaller, and at less cost,” he says of the successful magnet demonstration. 

      Play video

      Proof of the concept

      Bringing that new magnet concept to reality required three years of intensive work on design, establishing supply chains, and working out manufacturing methods for magnets that may eventually need to be produced by the thousands.

      “We built a first-of-a-kind, superconducting magnet. It required a lot of work to create unique manufacturing processes and equipment. As a result, we are now well-prepared to ramp-up for SPARC production,” says Joy Dunn, head of operations at CFS. “We started with a physics model and a CAD design, and worked through lots of development and prototypes to turn a design on paper into this actual physical magnet.” That entailed building manufacturing capabilities and testing facilities, including an iterative process with multiple suppliers of the superconducting tape, to help them reach the ability to produce material that met the needed specifications — and for which CFS is now overwhelmingly the world’s biggest user.

      They worked with two possible magnet designs in parallel, both of which ended up meeting the design requirements, she says. “It really came down to which one would revolutionize the way that we make superconducting magnets, and which one was easier to build.” The design they adopted clearly stood out in that regard, she says.

      In this test, the new magnet was gradually powered up in a series of steps until reaching the goal of a 20 tesla magnetic field — the highest field strength ever for a high-temperature superconducting fusion magnet. The magnet is composed of 16 plates stacked together, each one of which by itself would be the most powerful high-temperature superconducting magnet in the world.

      “Three years ago we announced a plan,” says Mumgaard, “to build a 20-tesla magnet, which is what we will need for future fusion machines.” That goal has now been achieved, right on schedule, even with the pandemic, he says.

      Citing the series of physics papers published last year, Brandon Sorbom, the chief science officer at CFS, says “basically the papers conclude that if we build the magnet, all of the physics will work in SPARC. So, this demonstration answers the question: Can they build the magnet? It’s a very exciting time! It’s a huge milestone.”

      The next step will be building SPARC, a smaller-scale version of the planned ARC power plant. The successful operation of SPARC will demonstrate that a full-scale commercial fusion power plant is practical, clearing the way for rapid design and construction of that pioneering device can then proceed full speed.

      Zuber says that “I now am genuinely optimistic that SPARC can achieve net positive energy, based on the demonstrated performance of the magnets. The next step is to scale up, to build an actual power plant. There are still many challenges ahead, not the least of which is developing a design that allows for reliable, sustained operation. And realizing that the goal here is commercialization, another major challenge will be economic. How do you design these power plants so it will be cost effective to build and deploy them?”

      Someday in a hoped-for future, when there may be thousands of fusion plants powering clean electric grids around the world, Zuber says, “I think we’re going to look back and think about how we got there, and I think the demonstration of the magnet technology, for me, is the time when I believed that, wow, we can really do this.”

      The successful creation of a power-producing fusion device would be a tremendous scientific achievement, Zuber notes. But that’s not the main point. “None of us are trying to win trophies at this point. We’re trying to keep the planet livable.” More

    • 50 Shares109 Views

      in Energy

      Amy Watterson: Model engineer

      by

      “I love that we are doing something that no one else is doing.”

      Amy Watterson is excited when she talks about SPARC, the pilot fusion plant being developed by MIT spinoff Commonwealth Fusion Systems (CSF). Since being hired as a mechanical engineer at the Plasma Science and Fusion Center (PSFC) two years ago, Watterson has found her skills stretching to accommodate the multiple needs of the project.

      Fusion, which fuels the sun and stars, has long been sought as a carbon-free energy source for the world. For decades researchers have pursued the “tokamak,” a doughnut-shaped vacuum chamber where hot plasma can be contained by magnetic fields and heated to the point where fusion occurs. Sustaining the fusion reactions long enough to draw energy from them has been a challenge.

      Watterson is intimately aware of this difficulty. Much of her life she has heard the quip, “Fusion is 50 years away and always will be.” The daughter of PSFC research scientist Catherine Fiore, who headed the PSFC’s Office of Environment, Safety and Health, and Reich Watterson, an optical engineer working at the center, she had watched her parents devote years to making fusion a reality. She determined before entering Rensselaer Polytechnic Institute that she could forgo any attempt to follow her parents into a field that might not produce results during her career.

      Working on SPARC has changed her mindset. Taking advantage of a novel high-temperature superconducting tape, SPARC’s magnets will be compact while generating magnetic fields stronger than would be possible from other mid-sized tokamaks, and producing more fusion power. It suggests a high-field device that produces net fusion gain is not 50 years away. SPARC is scheduled to be begin operation in 2025.

      An education in modeling

      Watterson’s current excitement, and focus, is due to an approaching milestone for SPARC: a test of the Toroidal Field Magnet Coil (TFMC), a scaled prototype for the HTS magnets that will surround SPARC’s toroidal vacuum chamber. Its design and manufacture have been shaped by computer models and simulations. As part of a large research team, Waterson has received an education in modeling over the past two years.

      Computer models move scientific experiments forward by allowing researchers to predict what will happen to an experiment — or its materials — if a parameter is changed. Modeling a component of the TFMC, for example, researchers can test how it is affected by varying amounts of current, different temperatures or different materials. With this information they can make choices that will improve the success of the experiment.

      In preparation for the magnet testing, Watterson has modeled aspects of the cryogenic system that will circulate helium gas around the TFMC to keep it cold enough to remain superconducting. Taking into consideration the amount of cooling entering the system, the flow rate of the helium, the resistance created by valves and transfer lines and other parameters, she can model how much helium flow will be necessary to guarantee the magnet stays cold enough. Adjusting a parameter can make the difference between a magnet remaining superconducting and becoming overheated or even damaged.

      Watterson and her teammates have also modeled pressures and stress on the inside of the TFMC. Pumping helium through the coil to cool it down will add 20 atmospheres of pressure, which could create a degree of flex in elements of the magnet that are welded down. Modeling can help determine how much pressure a weld can sustain.

      “How thick does a weld need to be, and where should you put the weld so that it doesn’t break — that’s something you don’t want to leave until you’re finally assembling it,” says Watterson.

      Modeling the behavior of helium is particularly challenging because its properties change significantly as the pressure and temperature change.

      “A few degrees or a little pressure will affect the fluid’s viscosity, density, thermal conductivity, and heat capacity,” says Watterson. “The flow has different pressures and temperatures at different places in the cryogenic loop. You end up with a set of equations that are very dependent on each other, which makes it a challenge to solve.”

      Role model

      Watterson notes that her modeling depends on the contributions of colleagues at the PSFC, and praises the collaborative spirit among researchers and engineers, a community that now feels like family. Her teammates have been her mentors. “I’ve learned so much more on the job in two years than I did in four years at school,” she says.

      She realizes that having her mother as a role model in her own family has always made it easier for her to imagine becoming a scientist or engineer. Tracing her early passion for engineering to a middle school Lego robotics tournament, her eyes widen as she talks about the need for more female engineers, and the importance of encouraging girls to believe they are equal to the challenge.

      “I want to be a role model and tell them ‘I’m a successful engineer, you can be too.’ Something I run into a lot is that little girls will say, ‘I can’t be an engineer, I’m not cut out for that.’ And I say, ‘Well that’s not true. Let me show you. If you can make this Lego robot, then you can be an engineer.’ And it turns out they usually can.”

      Then, as if making an adjustment to one of her computer models, she continues.

      “Actually, they always can.” More