Nuclear power and reactors

Subterms

    More stories

    • 50 Shares109 Views

      in Energy

      Amy Watterson: Model engineer

      by

      “I love that we are doing something that no one else is doing.”

      Amy Watterson is excited when she talks about SPARC, the pilot fusion plant being developed by MIT spinoff Commonwealth Fusion Systems (CSF). Since being hired as a mechanical engineer at the Plasma Science and Fusion Center (PSFC) two years ago, Watterson has found her skills stretching to accommodate the multiple needs of the project.

      Fusion, which fuels the sun and stars, has long been sought as a carbon-free energy source for the world. For decades researchers have pursued the “tokamak,” a doughnut-shaped vacuum chamber where hot plasma can be contained by magnetic fields and heated to the point where fusion occurs. Sustaining the fusion reactions long enough to draw energy from them has been a challenge.

      Watterson is intimately aware of this difficulty. Much of her life she has heard the quip, “Fusion is 50 years away and always will be.” The daughter of PSFC research scientist Catherine Fiore, who headed the PSFC’s Office of Environment, Safety and Health, and Reich Watterson, an optical engineer working at the center, she had watched her parents devote years to making fusion a reality. She determined before entering Rensselaer Polytechnic Institute that she could forgo any attempt to follow her parents into a field that might not produce results during her career.

      Working on SPARC has changed her mindset. Taking advantage of a novel high-temperature superconducting tape, SPARC’s magnets will be compact while generating magnetic fields stronger than would be possible from other mid-sized tokamaks, and producing more fusion power. It suggests a high-field device that produces net fusion gain is not 50 years away. SPARC is scheduled to be begin operation in 2025.

      An education in modeling

      Watterson’s current excitement, and focus, is due to an approaching milestone for SPARC: a test of the Toroidal Field Magnet Coil (TFMC), a scaled prototype for the HTS magnets that will surround SPARC’s toroidal vacuum chamber. Its design and manufacture have been shaped by computer models and simulations. As part of a large research team, Waterson has received an education in modeling over the past two years.

      Computer models move scientific experiments forward by allowing researchers to predict what will happen to an experiment — or its materials — if a parameter is changed. Modeling a component of the TFMC, for example, researchers can test how it is affected by varying amounts of current, different temperatures or different materials. With this information they can make choices that will improve the success of the experiment.

      In preparation for the magnet testing, Watterson has modeled aspects of the cryogenic system that will circulate helium gas around the TFMC to keep it cold enough to remain superconducting. Taking into consideration the amount of cooling entering the system, the flow rate of the helium, the resistance created by valves and transfer lines and other parameters, she can model how much helium flow will be necessary to guarantee the magnet stays cold enough. Adjusting a parameter can make the difference between a magnet remaining superconducting and becoming overheated or even damaged.

      Watterson and her teammates have also modeled pressures and stress on the inside of the TFMC. Pumping helium through the coil to cool it down will add 20 atmospheres of pressure, which could create a degree of flex in elements of the magnet that are welded down. Modeling can help determine how much pressure a weld can sustain.

      “How thick does a weld need to be, and where should you put the weld so that it doesn’t break — that’s something you don’t want to leave until you’re finally assembling it,” says Watterson.

      Modeling the behavior of helium is particularly challenging because its properties change significantly as the pressure and temperature change.

      “A few degrees or a little pressure will affect the fluid’s viscosity, density, thermal conductivity, and heat capacity,” says Watterson. “The flow has different pressures and temperatures at different places in the cryogenic loop. You end up with a set of equations that are very dependent on each other, which makes it a challenge to solve.”

      Role model

      Watterson notes that her modeling depends on the contributions of colleagues at the PSFC, and praises the collaborative spirit among researchers and engineers, a community that now feels like family. Her teammates have been her mentors. “I’ve learned so much more on the job in two years than I did in four years at school,” she says.

      She realizes that having her mother as a role model in her own family has always made it easier for her to imagine becoming a scientist or engineer. Tracing her early passion for engineering to a middle school Lego robotics tournament, her eyes widen as she talks about the need for more female engineers, and the importance of encouraging girls to believe they are equal to the challenge.

      “I want to be a role model and tell them ‘I’m a successful engineer, you can be too.’ Something I run into a lot is that little girls will say, ‘I can’t be an engineer, I’m not cut out for that.’ And I say, ‘Well that’s not true. Let me show you. If you can make this Lego robot, then you can be an engineer.’ And it turns out they usually can.”

      Then, as if making an adjustment to one of her computer models, she continues.

      “Actually, they always can.” More

    • 88 Shares99 Views

      in Energy

      Investigating materials for safe, secure nuclear power

      by

      Michael Short came to MIT in the fall of 2001 as an 18-year-old first-year who grew up in Boston’s North Shore. He immediately felt at home, so much so that he’s never really left. It’s not that Short has no interest in exploring the world beyond the confines of the Institute, as he is an energetic and venturesome fellow. It’s just that almost everything he hopes to achieve in his scientific career can, in his opinion, be best pursued at this university.

      Last year — after collecting four MIT degrees and joining the faculty of the Department of Nuclear Science and Engineering (NSE) in 2013 — he was promoted to the status of tenured associate professor.

      Short’s enthusiasm for MIT began early in high school when he attended weekend programs that were mainly taught by undergraduates. “It was a program filled with my kind of people,” he recalls. “My high school was very good, but this was at a different level — at the level I was seeking and hoping to achieve. I felt more at home here than I did in my hometown, and the Saturdays at MIT were the highlight of my week.” He loved his four-year experience as an MIT undergraduate, including the research he carried out in the Uhlig Corrosion Laboratory, and he wasn’t ready for it to end.

      After graduating in 2005 with two BS degrees (one in NSE and another in materials science and engineering), he took on some computer programming jobs and worked half time in the Uhlig lab under the supervision of Ronald Ballinger, a professor in both NSE and the Department of Materials Science and Engineering. Short soon realized that computer programming was not for him, and he started graduate studies with Ballinger as his advisor, earning a master’s and a PhD in nuclear science and engineering in 2010.

      Even as an undergraduate, Short was convinced that nuclear power was essential to our nation’s (and the world’s) energy future, especially in light of the urgent need to move toward carbon-free sources of power. During his first year, he was told by Ballinger that the main challenge confronting nuclear power was to find materials, and metals in particular, that could last long enough in the face of radiation and the chemically destructive effects of corrosion.

      Those words, persuasively stated, led him to his double major.  “Materials and radiation damage have been at the core of my research ever since,” Short says. “Remarkably, the stuff I started studying in my first year of college is what I do today, though I’ve extended this work in many directions.”

      Corrosion has proven to be an unexpectedly rich subject. “The traditional view is to expose metals to various things and see what happens — ‘cook and look,’ as it’s called,” he says. “A lot of folks view it that way, but it’s actually much more complex. In fact, some members of our own faculty don’t want to touch corrosion because it’s too complicated, too dirty. But that’s what I like about it.”

      In a 2020 paper published in Nature Communications, Short, his student Weiyue Zhou, and other colleagues made a surprising discovery. “Most people think radiation is bad and makes everything worse, but that’s not always the case,” Short maintains. His team found a specific set of conditions under which a metal (a nickel-chromium alloy) performs better when it is irradiated while undergoing corrosion in a molten salt mixture. Their finding is relevant, he adds, “because these are the conditions under which people are hoping to run the next generation of nuclear reactors.” Leading candidates for alternatives to today’s water-cooled reactors are molten salt and liquid metal (specifically liquid lead and sodium) cooled reactors. To this end, Short and his colleagues are currently carrying out similar experiments involving the irradiation of metal alloys immersed in liquid lead.

      Meanwhile, Short has pursued another multiyear project, trying to devise a new standard to serve as “a measurable unit of radiation damage.” In fact, these were the very words he wrote on his research statement when applying for his first faculty position at MIT, although he admits that he didn’t know then how to realize that goal. But the effort is finally paying off, as Short and his collaborators are about to submit their first big paper on the topic. He’s found that you can’t reduce radiation damage to a single number, which is what people have tried to do in the past, because that’s too simple. Instead, their new standard relates to the density of defects — the number of radiation-induced defects (or unintentional changes to the lattice structure) per unit volume for a given material.

      “Our approach is based on a theory that everyone agrees on — that defects have energy,” Short explains. However, many people told him and his team that the amount of energy stored within those defects would be too small to measure. But that just spurred them to try harder, making measurements at the microjoule level, at the very limits of detection.

      Short is convinced that their new standard will become “universally useful, but it will take years of testing on many, many materials followed by more years of convincing people using the classic method: Repeat, repeat, repeat, making sure that each time you get the same result. It’s the unglamorous side of science, but that’s the side that really matters.”

      The approach has already led Short, in collaboration with NSE proliferation expert Scott Kemp, into the field of nuclear security. Equipped with new insights into the signatures left behind by radiation damage, students co-supervised by Kemp and Short have devised methods for determining how much fissionable material has passed through a uranium enrichment facility, for example, by scrutinizing the materials exposed to these radioactive substances. “I never thought my preliminary work on corrosion experiments as an undergraduate would lead to this,” Short says.

      He has also turned his attention to “microreactors” — nuclear reactors with power ratings as small as a single megawatt, as compared to the 1,000-megawatt behemoths of today. Flexibility in the size of future power plants is essential to the economic viability of nuclear power, he insists, “because nobody wants to pay $10 billion for a reactor now, and I don’t blame them.”

      But the proposed microreactors, he says, “pose new material challenges that I want to solve. It comes down to cramming more material into a smaller volume, and we don’t have a lot of knowledge about how materials perform at such high densities.” Short is currently conducting experiments with the Idaho National Laboratory, irradiating possible microreactor materials to see how they change using a laser technique, transient grating spectroscopy (TGS), which his MIT group has had a big hand in advancing.

      It’s been an exhilarating 20 years at MIT for Short, and he has even more ambitious goals for the next 20 years. “I’d like to be one of those who came up with a way to verify the Iran nuclear deal and thereby helped clamp down on nuclear proliferation worldwide,” he says. “I’d like to choose the materials for our first power-generating nuclear fusion reactors. And I’d like to have influenced perhaps 50 to 100 former students who chose to stay in science because they truly enjoy it.

      “I see my job as creating scientists, not science,” he says, “though science is, of course, a convenient byproduct.” More

    • 88 Shares119 Views

      in Energy

      Manipulating magnets in the quest for fusion

      by

      “You get the high field, you get the performance.”

      Senior Research Scientist Brian LaBombard is summarizing what might be considered a guiding philosophy behind designing and engineering fusion devices at MIT’s Plasma Science and Fusion Center (PSFC). Beginning in 1972 with the Alcator A tokamak, through Alcator C (1978) and Alcator C-Mod (1991), the PSFC has used magnets with high fields to confine the hot plasma in compact, high-performance tokamaks. Joining what was then the Plasma Fusion Center as a graduate student in 1978, just as Alcator A was finishing its run, LaBombard is one of the few who has worked with each iteration of the high-field concept. Now he has turned his attention to the PSFC’s latest fusion venture, a fusion energy project called SPARC.

      Designed in collaboration with MIT spinoff Commonwealth Fusion Systems (CFS), SPARC employs novel high temperature superconducting (HTS) magnets at high-field to achieve fusion that will produce net energy gain. Some of these magnets will wrap toroidally around the tokamak’s doughnut-shaped vacuum chamber, confining fusion reactions and preventing damage to the walls of the device.

      The PSFC has spent three years researching, developing, and manufacturing a scaled version of these toroidal field (TF) coils — the toroidal field model coil, or TFMC. Before the TF coils can be built for SPARC, LaBombard and his team need to test the model coil under the conditions that it will experience in this tokamak.

      HTS magnets need to be cooled in order to remain superconducting, and to be protected from the heat generated by current. For testing, the TFMC will be enclosed in a cryostat, cooled to the low temperatures needed for eventual tokamak operation, and charged with current to produce magnetic field. How the magnet responds as the current is provided to the coil will determine if the technology is in hand to construct the 18 TF coils for SPARC.

      A history of achievement

      That LaBombard is part of the PSFC’s next fusion project is not unusual; that he is involved in designing, engineering, and testing the magnets is. Until 2018, when he led the R&D research team for one of the magnet designs being considered for SPARC, LaBombard’s 30-plus years of celebrated research had focused on other areas of the fusion question.

      As a graduate student, he gained early acclaim for the research he reported in his PhD thesis. Working on Alcator C, he made groundbreaking discoveries about the plasma physics in the “boundary” region of the tokamak, between the edge of the fusing core and the wall of the machine. With typical modesty, LaBombard credits some of his success to the fact that the topic was not well-studied, and that Alcator C provided measurements not possible on other machines.

      “People knew about the boundary, but nobody was really studying it in detail. On Alcator C, there were interesting phenomena, such as marfes [multifaceted asymmetric radiation from the edge], being detected for the first time. This pushed me to make boundary layer measurements in great detail that no one had ever seen before. It was all new territory, so I made a big splash.”

      That splash established him as a leading researcher in the field of boundary plasmas. After a two-year turn at the University of California at Los Angeles working on a plasma-wall test facility called PISCES, LaBombard, who grew up in New England, was happy to return to MIT to join the PSFC’s new Alcator C-Mod project.

      Over the next 28 years of C-Mod’s construction phase and operation, LaBombard continued to make groundbreaking contributions to understanding tokamak edge and divertor plasmas, and to design internal components that can survive the harsh conditions and provide plasma control — including C-Mod’s vertical target plate divertor and a unique divertor cryopump system. That experience led him to conceive of the “X-point target divertor” for handling extreme fusion power exhaust and to propose a national Advanced Divertor tokamak eXperiment (ADX) to test such ideas.

      All along, LaBombard’s true passion was in creating revolutionary diagnostics to unfold boundary layer physics and in guiding graduate students to do the same: an Omegatron, to measure impurity concentrations directly in the boundary plasma, resolved by charge-to-mass ratio; fast-scanning Langmuir-Mach probes to measure plasma flows; a Shoelace Antenna to provide insight into plasma fluctuations at the edge; the invention of a Mirror Langmuir Probe for the real-time measurements of plasma turbulence at high bandwidth.

      Switching sides

      His expertise established, he could have continued this focus on the edge of the plasma through collaborations with other laboratories and at the PSFC. Instead, he finds himself on the other side of the vacuum chamber, immersed in magnet design and technology. Challenged with finding an effective HTS magnet design for SPARC, he and his team were able to propose a winning strategy, one that seemed most likely to achieve the compact high field and high performance that PSFC tokamaks have been known for.

      LaBombard is stimulated by his new direction and excited about the upcoming test of the TFMC. His new role takes advantage of his physics background in electricity and magnetism. It also supports his passion for designing and building things, which he honed as high school apprentice to his machinist father and explored professionally building systems for Alcator C-Mod.

      “I view my principal role is to make sure the TF coil works electrically, the way it’s supposed to,” he says. “So it produces the magnetic field without damaging the coil.”

      A successful test would validate the understanding of how the new magnet technology works, and will prepare the team to build magnets for SPARC.

      Among those overseeing the hours of TFMC testing will be graduate students, current and former, reminding LaBombard of his own student days working on Alcator C, and of his years supervising students on Alcator C-Mod.

      “Those students were directly involved with Alcator C-Mod. They would jump in, make things happen — and as a team. This team spirit really enabled everyone to excel.

      “And looking to when SPARC was taking shape, you could see that across the board, from the new folks to the younger folks, they really got engaged by the spirit of Alcator — by recognition of the plasma performance that can be made possible by high magnetic fields.”

      He laughs as he looks to the past and to the future.

      “And they are taking it to SPARC.” More