Plasma Science and Fusion Center

Subterms

    More stories

    • 100 Shares99 Views

      in Energy

      Panel addresses technologies needed for a net-zero future

      by

      Five speakers at a recent public panel discussion hosted by the MIT Energy Initiative (MITEI) and introduced by Deputy Director for Science and Technology Robert Stoner tackled one of the thorniest, yet most critical, questions facing the world today: How can we achieve the ambitious goals set by governments around the globe, including the United States, to reach net zero emissions of greenhouse gases by mid-century?

      While the challenges are great, the panelists agreed, there is reason for optimism that these technological challenges can be solved. More uncertain, some suggested, are the social, economic, and political hurdles to bringing about the needed innovations.

      The speakers addressed areas where new or improved technologies or systems are needed if these ambitious goals are to be achieved. Anne White, aassociate provost and associate vice president for research administration and a professor of nuclear science and engineering at MIT, moderated the panel discussion. She said that achieving the ambitious net-zero goal “has to be accomplished by filling some gaps, and going after some opportunities.” In addressing some of these needs, she said the five topics chosen for the panel discussion were “places where MIT has significant expertise, and progress is already ongoing.”

      First of these was the heating and cooling of buildings. Christoph Reinhart, a professor of architecture and director of the Building Technology Program, said that currently about 1 percent of existing buildings are being retrofitted each year for energy efficiency and conversion from fossil-fuel heating systems to efficient electric ones — but that is not nearly enough to meet the 2050 net-zero target. “It’s an enormous task,” he said. To meet the goals, he said, would require increasing the retrofitting rate to 5 percent per year, and to require all new construction to be carbon neutral as well.

      Reinhart then showed a series of examples of how such conversions could take place using existing solar and heat pump technology, and depending on the configuration, how they could provide a payback to the homeowner within 10 years or less. However, without strong policy incentives the initial cost outlay for such a system, on the order of $50,000, is likely to put conversions out of reach of many people. Still, a recent survey found that 30 percent of homeowners polled said they would accept installation at current costs. While there is government money available for incentives for others, “we have to be very clever on how we spend all this money … and make sure that everybody is basically benefiting.”

      William Green, a professor of chemical engineering, spoke about the daunting challenge of bringing aviation to net zero. “More and more people like to travel,” he said, but that travel comes with carbon emissions that affect the climate, as well as air pollution that affects human health. The economic costs associated with these emissions, he said, are estimated at $860 per ton of jet fuel used — which is very close to the cost of the fuel itself. So the price paid by the airlines, and ultimately by the passengers, “is only about half of the true cost to society, and the other half is being borne by all of us, by the fact that it’s affecting the climate and it’s causing medical problems for people.”

      Eliminating those emissions is a major challenge, he said. Virtually all jet fuel today is fossil fuel, but airlines are starting to incorporate some biomass-based fuel, derived mostly from food waste. But even these fuels are not carbon-neutral, he said. “They actually have pretty significant carbon intensity.”

      But there are possible alternatives, he said, mostly based on using hydrogen produced by clean electricity, and making fuels out of that hydrogen by reacting it, for example, with carbon dioxide. This could indeed produce a carbon-neutral fuel that existing aircraft could use, but the process is costly, requiring a great deal of hydrogen, and ways of concentrating carbon dioxide. Other viable options also exist, but all would add significant expense, at least with present technology. “It’s going to cost a lot more for the passengers on the plane,” Green said, “But the society will benefit from that.”

      Increased electrification of heating and transportation in order to avoid the use of fossil fuels will place major demands on the existing electric grid systems, which have to perform a constant delicate balancing of production with demand. Anuradha Annaswamy, a senior research scientist in MIT’s mechanical engineering department, said “the electric grid is an engineering marvel.” In the United States it consists of 300,000 miles of transmission lines capable of carrying 470,000 megawatts of power.

      But with a projected doubling of energy from renewable sources entering the grid by 2030, and with a push to electrify everything possible — from transportation to buildings to industry — the load is not only increasing, but the patterns of both energy use and production are changing. Annaswamy said that “with all these new assets and decision-makers entering the picture, the question is how you can use a more sophisticated information layer that coordinates how all these assets are either consuming or producing or storing energy, and have that information layer coexist with the physical layer to make and deliver electricity in all these ways. It’s really not a simple problem.”

      But there are ways of addressing these complexities. “Certainly, emerging technologies in power electronics and control and communication can be leveraged,” she said. But she added that “This is not just a technology problem, really, it is something that requires technologists, economists, and policymakers to all come together.”

      As for industrial processes, Bilge Yildiz, a professor of nuclear science and engineering and materials science and engineering, said that “the synthesis of industrial chemicals and materials constitutes about 33 percent of global CO2 emissions at present, and so our goal is to decarbonize this difficult sector.” About half of all these industrial emissions come from the production of just four materials: steel, cement, ammonia, and ethylene, so there is a major focus of research on ways to reduce their emissions.

      Most of the processes to make these materials have changed little for more than a century, she said, and they are mostly heat-based processes that involve burning a lot of fossil fuel. But the heat can instead be provided from renewable electricity, which can also be used to drive electrochemical reactions in some cases as a substitute for the thermal reactions. Already, there are processes for making cement and steel that produce only about half the present carbon dioxide (CO2) emissions.

      The production of ammonia, which is widely used in fertilizer and other bulk chemicals, accounts for more greenhouse gas emissions than any other industrial source. The present thermochemical process could be replaced by an electrochemical process, she said. Similarly, the production of ethylene, as a feedstock for plastics and other materials, is the second-highest emissions producer, with three tons of carbon dioxide released for every ton of ethylene produced. Again, an electrochemical alternative method exists, but needs to be improved to be cost competitive.

      As the world moves toward electrification of industrial processes to eliminate fossil fuels, the need for emissions-free sources of electricity will continue to increase. One very promising potential addition to the range of carbon-free generation sources is fusion, a field in which MIT is a leader in developing a particularly promising technology that takes advantage of the unique properties of high-temperature superconducting (HTS) materials.

      Dennis Whyte, the director of MIT’s Plasma Science and Fusion Center, pointed out that despite global efforts to reduce CO2 emissions, “we use exactly the same percentage of carbon-based products to generate energy as 10 years ago, or 20 years ago.” To make a real difference in global emissions, “we need to make really massive amounts of carbon-free energy.”

      Fusion, the process that powers the sun, is a particularly promising pathway, because the fuel, derived from water, is virtually inexhaustible. By using recently developed HTS material to generate the powerful magnetic fields needed to produce a sustained fusion reaction, the MIT-led project, which led to a spinoff company called Commonwealth Fusion Systems, was able to radically reduce the required size of a fusion reactor, Whyte explained. Using this approach, the company, in collaboration with MIT, expects to have a fusion system that produces net energy by the middle of this decade, and be ready to build a commercial plant to produce power for the grid early in the next. Meanwhile, at least 25 other private companies are also attempting to commercialize fusion technology. “I think we can take some credit for helping to spawn what is essentially now a new industry in the United States,” Whyte said.

      Fusion offers the potential, along with existing solar and wind technologies, to provide the emissions-free power the world needs, Whyte says, but that’s only half the problem, the other part being how to get that power to where it’s needed, when it’s needed. “How do we adapt these new energy sources to be as compatible as possible with everything that we have already in terms of energy delivery?”

      Part of the way to find answers to that, he suggested, is more collaborative work on these issues that cut across disciplines, as well as more of the kinds of cross-cutting conversations and interactions that took place in this panel discussion. More

    • 113 Shares169 Views

      in Energy

      A new mathematical “blueprint” is accelerating fusion device development

      by

      Developing commercial fusion energy requires scientists to understand sustained processes that have never before existed on Earth. But with so many unknowns, how do we make sure we’re designing a device that can successfully harness fusion power?

      We can fill gaps in our understanding using computational tools like algorithms and data simulations to knit together experimental data and theory, which allows us to optimize fusion device designs before they’re built, saving much time and resources.

      Currently, classical supercomputers are used to run simulations of plasma physics and fusion energy scenarios, but to address the many design and operating challenges that still remain, more powerful computers are a necessity, and of great interest to plasma researchers and physicists.

      Quantum computers’ exponentially faster computing speeds have offered plasma and fusion scientists the tantalizing possibility of vastly accelerated fusion device development. Quantum computers could reconcile a fusion device’s many design parameters — for example, vessel shape, magnet spacing, and component placement — at a greater level of detail, while also completing the tasks faster. However, upgrading to a quantum computer is no simple task.

      In a paper, “Dyson maps and unitary evolution for Maxwell equations in tensor dielectric media,” recently published in Physics Review A, Abhay K. Ram, a research scientist at the MIT Plasma Science and Fusion Center (PSFC), and his co-authors Efstratios Koukoutsis, Kyriakos Hizanidis, and George Vahala present a framework that would facilitate the use of quantum computers to study electromagnetic waves in plasma and its manipulation in magnetic confinement fusion devices.

      Quantum computers excel at simulating quantum physics phenomena, but many topics in plasma physics are predicated on the classical physics model. A plasma (which is the “dielectric media” referenced in the paper’s title) consists of many particles — electrons and ions — the collective behaviors of which are effectively described using classic statistical physics. In contrast, quantum effects that influence atomic and subatomic scales are averaged out in classical plasma physics.  

      Furthermore, the descriptive limitations of quantum mechanics aren’t suited to plasma. In a fusion device, plasmas are heated and manipulated using electromagnetic waves, which are one of the most important and ubiquitous occurrences in the universe. The behaviors of electromagnetic waves, including how waves are formed and interact with their surroundings, are described by Maxwell’s equations — a foundational component of classical plasma physics, and of general physics as well. The standard form of Maxwell’s equations is not expressed in “quantum terms,” however, so implementing the equations on a quantum computer is like fitting a square peg in a round hole: it doesn’t work.

      Consequently, for plasma physicists to take advantage of quantum computing’s power for solving problems, classical physics must be translated into the language of quantum mechanics. The researchers tackled this translational challenge, and in their paper, they reveal that a Dyson map can bridge the translational divide between classical physics and quantum mechanics. Maps are mathematical functions that demonstrate how to take an input from one kind of space and transform it to an output that is meaningful in a different kind of space. In the case of Maxwell’s equations, a Dyson map allows classical electromagnetic waves to be studied in the space utilized by quantum computers. In essence, it reconfigures the square peg so it will fit into the round hole without compromising any physics.

      The work also gives a blueprint of a quantum circuit encoded with equations expressed in quantum bits (“qubits”) rather than classical bits so the equations may be used on quantum computers. Most importantly, these blueprints can be coded and tested on classical computers.

      “For years we have been studying wave phenomena in plasma physics and fusion energy science using classical techniques. Quantum computing and quantum information science is challenging us to step out of our comfort zone, thereby ensuring that I have not ‘become comfortably numb,’” says Ram, quoting a Pink Floyd song.

      The paper’s Dyson map and circuits have put quantum computing power within reach, fast-tracking an improved understanding of plasmas and electromagnetic waves, and putting us that much closer to the ideal fusion device design.    More

    • 75 Shares149 Views

      in Environment

      Exploring the bow shock and beyond

      by

      For most people, the night sky conjures a sense of stillness, an occasional shooting star the only visible movement. A conversation with Rishabh Datta, however, unveils the supersonic drama crashing above planet Earth. The PhD candidate has focused his recent study on the plasma speeding through space, flung from sources like the sun’s corona and headed toward Earth, halted abruptly by colliding with the planet’s magnetosphere. The resulting shock wave is similar to the “bow shock” that forms around the nose cone of a supersonic jet, which manifests as the familiar sonic boom.

      The bow shock phenomenon has been well studied. “It’s probably one of the things that’s keeping life alive,” says Datta, “protecting us from the solar wind.” While he feels the magnetosphere provides “a very interesting space laboratory,” Datta’s main focus is, “Can we create this high-energy plasma that is moving supersonically in a laboratory, and can we study it? And can we learn things that are hard to diagnose in an astrophysical plasma?”

      Datta’s research journey to the bow shock and beyond began when he joined a research program for high school students at the National University Singapore. Tasked with culturing bacteria and measuring the amount of methane they produced in a biogas tank, Datta found his first research experience “quite nasty.”

      “I was working with chicken manure, and every day I would come home smelling completely awful,” he says.

      As an undergraduate at Georgia Tech, Datta’s interests turned toward solar power, compelled by a new technology he felt could generate sustainable energy. By the time he joined MIT’s Department of Mechanical Engineering, though, his interests had morphed into researching the heat and mass transfer from airborne droplets. After a year of study, he felt the need to go in a yet another direction.

      The subject of astrophysical plasmas had recently piqued his interest, and he followed his curiosity to Department of Nuclear Science and Engineering Professor Nuno Loureiro’s introductory plasma class. There he encountered Professor Jack Hare, who was sitting in on the class and looking for students to work with him.

      “And that’s how I ended up doing plasma physics and studying bow shocks,” he says, “a long and circuitous route that started with culturing bacteria.”

      Gathering measurements from MAGPIE

      Datta is interested in what he can learn about plasma from gathering measurements of a laboratory-created bow shock, seeking to verify theoretical models. He uses data already collected from experiments on a pulsed-power generator known as MAGPIE (the Mega-Ampere Generator of Plasma Implosion Experiments), located at Imperial College, London. By observing how long it takes a plasma to reach an obstacle, in this case a probe that measures magnetic fields, Datta was able to determine its velocity.   

      With the velocity established, an interferometry system was able to provide images of the probe and the plasma around it, allowing Datta to characterize the structure of the bow shock.

      “The shape depends on how fast sound waves can travel in a plasma,” says Datta. “And this ‘sound speed’ depends on the temperature.”

      The interdependency of these characteristics means that by imaging a shock it’s possible to determine temperature, sound speed, and other measurements more easily and cheaply than with other methods.

      “And knowing more about your plasma allows you to make predictions about, for example, electrical resistivity, which can be important for understanding other physics that might interest you,” says Datta, “like magnetic reconnection.”

      This phenomenon, which controls the evolution of such violent events as solar flares, coronal mass ejections, magnetic storms that drive auroras, and even disruptions in fusion tokamaks, has become the focus of his recent research. It happens when opposing magnetic fields in a plasma break and then reconnect, generating vast quantities of heat and accelerating the plasma to high velocities.

      Onward to Z

      Datta travels to Sandia National Laboratories in Albuquerque, New Mexico, to work on the largest pulsed power facility in the world, informally known as “the Z machine,” to research how the properties of magnetic reconnection change when a plasma emits strong radiation and cools rapidly.

      In future years, Datta will only have to travel across Albany Street on the MIT campus to work on yet another machine, PUFFIN, currently being built at the Plasma Science and Fusion Center (PSFC). Like MAGPIE and Z, PUFFIN is a pulsed power facility, but with the ability to drive the current 10 times longer than other machines, opening up new opportunities in high-energy-density laboratory astrophysics.

      Hare, who leads the PUFFIN team, is pleased with Datta’s increasing experience.

      “Working with Rishabh is a real pleasure,” he says, “He has quickly learned the ins and outs of experimental plasma physics, often analyzing data from machines he hasn’t even yet had the chance to see! While we build PUFFIN it’s really useful for us to carry out experiments at other pulsed-power facilities worldwide, and Rishabh has already written papers on results from MAGPIE, COBRA at Cornell in Ithaca, New York, and the Z Machine.”

      Pursuing climate action at MIT

      Hand-in-hand with Datta’s quest to understand plasma is his pursuit of sustainability, including carbon-free energy solutions. A member of the Graduate Student Council’s Sustainability Committee since he arrived in 2019, he was heartened when MIT, revising their climate action plan, provided him and other students the chance to be involved in decision-making. He led focus groups to provide graduate student input on the plan, raising issues surrounding campus decarbonization, the need to expand hiring of early-career researchers working on climate and sustainability, and waste reduction and management for MIT laboratories.

      When not focused on bringing astrophysics to the laboratory, Datta sometimes experiments in a lab closer to home — the kitchen — where he often challenges himself to duplicate a recipe he has recently tried at a favorite restaurant. His stated ambition could apply to his sustainability work as well as to his pursuit of understanding plasma.

      “The goal is to try and make it better,” he says. “I try my best to get there.”

      Datta’s work has been funded, in part, by the National Science Foundation, National Nuclear Security Administration, and the Department of Energy. More

    • 138 Shares149 Views

      in Energy

      Ian Hutchinson: A lifetime probing plasma, on Earth and in space

      by

      Ordinary folks gazing at the night sky can readily spot Earth’s close neighbors and the light of distant stars. But when Ian Hutchinson scans the cosmos, he takes in a great deal more. There is, for instance, the constant rush of plasma — highly charged ionized gases — from the sun. As this plasma flows by solid bodies such as the moon, it interacts with them electromagnetically, sometimes generating a phenomenon called an electron hole — a perturbation in the gaseous solar tide that forms a solitary, long-lived wave. Hutchinson, a professor in the MIT Department of Nuclear Science and Engineering (NSE), knows they exist because he found a way to measure them.

      “When I look up at the moon with my sweetheart, my wife of 48 years, I imagine that streaming from its dark side are electron holes that my students and I predicted, and that we then discovered,” he says. “It’s quite sentimental to me.”

      Hutchinson’s studies of these wave phenomena, summed up in a paper, “Electron holes in phase space: What they are and why they matter,” recently earned the 2022 Ronald C. Davidson Award for Plasma Physics presented by the American Physical Society’s Division of Plasma Physics.

      Measuring perturbations in plasma

      Hutchinson’s exploration of electron holes was sparked by his work over many decades in fusion energy, another branch of plasma physics. He has made many contributions to the design, operation, and experimental investigation of tokamaks — a toroidal magnetic confinement device — intended to replicate and harness the fiery thermonuclear reactions in the plasma of stars for carbon-free energy on Earth. Hutchinson took a particular interest in how to measure the plasma, notably the flow at the edges of tokamaks.

      Heat generated from fusion reactions may escape magnetic confinement and build up along these edges, leading to potential temperature spikes that impact the performance of the confinement device. Hutchinson discovered how to interpret signals from small probes to measure and track plasma velocity at the tokamak’s edge.

      “My theoretical work also showed that these probes quite likely induce electron holes,” he says. But proving this contention required experiments at resolutions in time and space beyond what tokamaks allow. That’s when Hutchinson had an important insight.

      “I realized that the phenomena we were trying to investigate can actually be measured with exquisite accuracy by satellites that travel through plasma surrounding Earth and other solid bodies,” he says. Although plasmas in space are at a much larger scale than the plasmas generated in the laboratory, measurements of these gases by a satellite is analogous “to a situation where we fly a tiny micron-sized spacecraft through the wakes of probes at the edge of tokamaks,” says Hutchinson.

      Using satellite data provided by NASA, Hutchinson set about analyzing solar plasma as it whips by the moon. “We predicted instabilities and the generation of electron holes,” he recounts. “Our theory passed with flying colors: We saw lots of holes in the wake of the moon, and few elsewhere.”

      Developing tokamaks

      Hutchinson grew up in the English midlands and attended Cambridge University, where he became “intrigued by plasma physics in a course taught by an entertaining and effective teacher,” he says.

      Hutchinson headed for doctoral studies at Australian National University on fellowship. The experience afforded him his first opportunity for research on plasma confinement. “There I was at the ends of the Earth, and I was one of very few scientists worldwide with a tokamak almost to myself,” he says. “It was a device that had risen to the top of everyone’s agenda in fusion research as something we really needed to understand.”

      His dissertation, which examined instabilities in plasma, and his hands-on experience with the device, brought him to the attention of Ronald Parker SM ’63, PhD ’67, now emeritus professor of nuclear science and engineering and electrical engineering and computer science, who was building MIT’s Alcator tokamak program.

      In 1976, Hutchinson joined this group, spending three years as a research scientist. After an interval in Britain, he returned to MIT with a faculty position in NSE, and soon, a leadership role in developing the next phase of the Institute’s fusion experiment, the Alcator-C Mod tokamak.

      “This was a major development of the high-magnetic field approach to fusion,” says Hutchinson. Powerful magnets are essential for containing the superhot plasma; the MIT group developed an experiment with a magnetic field more than 150,000 times the strength of the Earth’s magnetic field. “We were in the business of determining whether tokamaks had sufficiently good confinement to function as fusion reactors,” he says.

      Hutchinson oversaw the nearly six-year construction of the device, which was funded by the U.S. Department of Energy. He then led its operation starting in 1993, creating a national facility for experiments that drew scientists and students from around the world. At the time, it was the largest research group on campus at MIT.

      In their studies, scientists employed novel heating and sustainment techniques using radio waves and microwaves. They also discovered new methods for performing diagnostics inside the tokamak. “Alcator C-Mod demonstrated excellent confinement in a more compact and cost-effective device,” says Hutchinson. “It was unique in the world.”

      Hutchinson is proud of Alcator C-Mod’s technological achievements, including its record for highest plasma pressure for a magnetic confinement device. But this large-scale project holds even greater significance for him. “Alcator C-Mod helped beat a new path in fusion research, and has become the basis for the SPARC tokamak now under construction,” he says.

      SPARC is a compact, high-magnetic field fusion energy device under development through a collaboration between MIT’s Plasma Science and Fusion Center and startup Commonwealth Fusions Systems. Its goal is to demonstrate net energy gain from fusion, prove the viability of fusion as a source of carbon-free energy, and tip the scales in the race against climate change. A number of SPARC’s leaders are students Hutchinson taught. “This is a source of considerable satisfaction,” he says. “Some of their down-to-Earth realism comes from me, and perhaps some of their aspirations have been molded by their work with me.” 

      A new phase

      After leading Alcator C-Mod for 15 years and generating hundreds of journal articles, Hutchinson served as NSE’s department head from 2003 to 2009. He wrote the standard textbook on measuring plasmas, and has more recently written “A Student’s Guide to Numerical Methods” (2015), which evolved from a course he taught to introduce graduate students to computational problem-solving in physics and engineering.

      After this, his 40th year on the MIT faculty, Hutchinson will be stepping back from teaching. “It’s important for new generations of students to be taught by people at the pinnacle of their mental and intellectual capacity, and when you reach my age, you’re aware of the fact that you’re slowing down,” he says.

      Hutchinson’s at no loss for ways to spend his time. As a devout Christian, he speaks and writes about the relationship between religion and science, trying to help skeptics on both sides find common ground. He sings in two choral groups, and is very busy grandparenting four grandsons. For a complete change of pace, Hutchinson goes fly fishing.

      But he still has plans to explore new frontiers in plasma physics. “I’m gratified to say I still do important research,” he says. “I’ve solved most of the problems in electron holes, and now I need to say something about ion holes!” More

    • 113 Shares119 Views

      in Energy

      MIT scientists contribute to National Ignition Facility fusion milestone

      by

      On Monday, Dec. 5, at around 1 a.m., a tiny sphere of deuterium-tritium fuel surrounded by a cylindrical can of gold called a hohlraum was targeted by 192 lasers at the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL) in California. Over the course of billionths of a second, the lasers fired, generating X-rays inside the gold can, and imploding the sphere of fuel.

      On that morning, for the first time ever, the lasers delivered 2.1 megajoules of energy and yielded 3.15 megajoules in return, achieving a historic fusion energy gain well above 1 — a result verified by diagnostic tools developed by the MIT Plasma Science and Fusion Center (PSFC). The use of these tools and their importance was referenced by Arthur Pak, a LLNL staff scientist who spoke at a U.S. Department of Energy press event on Dec. 13 announcing the NIF’s success.

      Johan Frenje, head of the PSFC High-Energy-Density Physics division, notes that this milestone “will have profound implications for laboratory fusion research in general.”

      Since the late 1950s, researchers worldwide have pursued fusion ignition and energy gain in a laboratory, considering it one of the grand challenges of the 21st century. Ignition can only be reached when the internal fusion heating power is high enough to overcome the physical processes that cool the fusion plasma, creating a positive thermodynamic feedback loop that very rapidly increases the plasma temperature. In the case of inertial confinement fusion, the method used at the NIF, ignition can initiate a “fuel burn propagation” into the surrounding dense and cold fuel, and when done correctly, enable fusion-energy gain.

      Frenje and his PSFC division initially designed dozens of diagnostic systems that were implemented at the NIF, including the vitally important magnetic recoil neutron spectrometer (MRS), which measures the neutron energy spectrum, the data from which fusion yield, plasma ion temperature, and spherical fuel pellet compression (“fuel areal density”) can be determined. Overseen by PSFC Research Scientist Maria Gatu Johnson since 2013, the MRS is one of two systems at the NIF relied upon to measure the absolute neutron yield from the Dec. 5 experiment because of its unique ability to accurately interpret an implosion’s neutron signals.

      “Before the announcement of this historic achievement could be made, the LLNL team wanted to wait until Maria had analyzed the MRS data to an adequate level for a fusion yield to be determined,” says Frenje.

      Response around MIT to NIF’s announcement has been enthusiastic and hopeful. “This is the kind of breakthrough that ignites the imagination,” says Vice President for Research Maria Zuber, “reminding us of the wonder of discovery and the possibilities of human ingenuity. Although we have a long, hard path ahead of us before fusion can deliver clean energy to the electrical grid, we should find much reason for optimism in today’s announcement. Innovation in science and technology holds great power and promise to address some of the world’s biggest challenges, including climate change.”

      Frenje also credits the rest of the team at the PSFC’s High-Energy-Density Physics division, the Laboratory for Laser Energetics at the University of Rochester, LLNL, and other collaborators for their support and involvement in this research, as well as the National Nuclear Security Administration of the Department of Energy, which has funded much of their work since the early 1990s. He is also proud of the number of MIT PhDs that have been generated by the High-Energy-Density Physics Division and subsequently hired by LLNL, including the experimental lead for this experiment, Alex Zylstra PhD ’15.

      “This is really a team effort,” says Frenje. “Without the scientific dialogue and the extensive know-how at the HEDP Division, the critical contributions made by the MRS system would not have happened.” More

    • 100 Shares129 Views

      in Energy

      Machine learning facilitates “turbulence tracking” in fusion reactors

      by

      Fusion, which promises practically unlimited, carbon-free energy using the same processes that power the sun, is at the heart of a worldwide research effort that could help mitigate climate change.

      A multidisciplinary team of researchers is now bringing tools and insights from machine learning to aid this effort. Scientists from MIT and elsewhere have used computer-vision models to identify and track turbulent structures that appear under the conditions needed to facilitate fusion reactions.

      Monitoring the formation and movements of these structures, called filaments or “blobs,” is important for understanding the heat and particle flows exiting from the reacting fuel, which ultimately determines the engineering requirements for the reactor walls to meet those flows. However, scientists typically study blobs using averaging techniques, which trade details of individual structures in favor of aggregate statistics. Individual blob information must be tracked by marking them manually in video data. 

      The researchers built a synthetic video dataset of plasma turbulence to make this process more effective and efficient. They used it to train four computer vision models, each of which identifies and tracks blobs. They trained the models to pinpoint blobs in the same ways that humans would.

      When the researchers tested the trained models using real video clips, the models could identify blobs with high accuracy — more than 80 percent in some cases. The models were also able to effectively estimate the size of blobs and the speeds at which they moved.

      Because millions of video frames are captured during just one fusion experiment, using machine-learning models to track blobs could give scientists much more detailed information.

      “Before, we could get a macroscopic picture of what these structures are doing on average. Now, we have a microscope and the computational power to analyze one event at a time. If we take a step back, what this reveals is the power available from these machine-learning techniques, and ways to use these computational resources to make progress,” says Theodore Golfinopoulos, a research scientist at the MIT Plasma Science and Fusion Center and co-author of a paper detailing these approaches.

      His fellow co-authors include lead author Woonghee “Harry” Han, a physics PhD candidate; senior author Iddo Drori, a visiting professor in the Computer Science and Artificial Intelligence Laboratory (CSAIL), faculty associate professor at Boston University, and adjunct at Columbia University; as well as others from the MIT Plasma Science and Fusion Center, the MIT Department of Civil and Environmental Engineering, and the Swiss Federal Institute of Technology at Lausanne in Switzerland. The research appears today in Nature Scientific Reports.

      Heating things up

      For more than 70 years, scientists have sought to use controlled thermonuclear fusion reactions to develop an energy source. To reach the conditions necessary for a fusion reaction, fuel must be heated to temperatures above 100 million degrees Celsius. (The core of the sun is about 15 million degrees Celsius.)

      A common method for containing this super-hot fuel, called plasma, is to use a tokamak. These devices utilize extremely powerful magnetic fields to hold the plasma in place and control the interaction between the exhaust heat from the plasma and the reactor walls.

      However, blobs appear like filaments falling out of the plasma at the very edge, between the plasma and the reactor walls. These random, turbulent structures affect how energy flows between the plasma and the reactor.

      “Knowing what the blobs are doing strongly constrains the engineering performance that your tokamak power plant needs at the edge,” adds Golfinopoulos.

      Researchers use a unique imaging technique to capture video of the plasma’s turbulent edge during experiments. An experimental campaign may last months; a typical day will produce about 30 seconds of data, corresponding to roughly 60 million video frames, with thousands of blobs appearing each second. This makes it impossible to track all blobs manually, so researchers rely on average sampling techniques that only provide broad characteristics of blob size, speed, and frequency.

      “On the other hand, machine learning provides a solution to this by blob-by-blob tracking for every frame, not just average quantities. This gives us much more knowledge about what is happening at the boundary of the plasma,” Han says.

      He and his co-authors took four well-established computer vision models, which are commonly used for applications like autonomous driving, and trained them to tackle this problem.

      Simulating blobs

      To train these models, they created a vast dataset of synthetic video clips that captured the blobs’ random and unpredictable nature.

      “Sometimes they change direction or speed, sometimes multiple blobs merge, or they split apart. These kinds of events were not considered before with traditional approaches, but we could freely simulate those behaviors in the synthetic data,” Han says.

      Creating synthetic data also allowed them to label each blob, which made the training process more effective, Drori adds.

      Using these synthetic data, they trained the models to draw boundaries around blobs, teaching them to closely mimic what a human scientist would draw.

      Then they tested the models using real video data from experiments. First, they measured how closely the boundaries the models drew matched up with actual blob contours.

      But they also wanted to see if the models predicted objects that humans would identify. They asked three human experts to pinpoint the centers of blobs in video frames and checked to see if the models predicted blobs in those same locations.

      The models were able to draw accurate blob boundaries, overlapping with brightness contours which are considered ground-truth, about 80 percent of the time. Their evaluations were similar to those of human experts, and successfully predicted the theory-defined regime of the blob, which agrees with the results from a traditional method.

      Now that they have shown the success of using synthetic data and computer vision models for tracking blobs, the researchers plan to apply these techniques to other problems in fusion research, such as estimating particle transport at the boundary of a plasma, Han says.

      They also made the dataset and models publicly available, and look forward to seeing how other research groups apply these tools to study the dynamics of blobs, says Drori.

      “Prior to this, there was a barrier to entry that mostly the only people working on this problem were plasma physicists, who had the datasets and were using their methods. There is a huge machine-learning and computer-vision community. One goal of this work is to encourage participation in fusion research from the broader machine-learning community toward the broader goal of helping solve the critical problem of climate change,” he adds.

      This research is supported, in part, by the U.S. Department of Energy and the Swiss National Science Foundation. More

    • 63 Shares159 Views

      in Energy

      Finding community in high-energy-density physics

      by

      Skylar Dannhoff knew one thing: She did not want to be working alone.

      As an undergraduate at Case Western Reserve University, she had committed to a senior project that often felt like solitary lab work, a feeling heightened by the pandemic. Though it was an enriching experience, she was determined to find a graduate school environment that would foster community, one “with lots of people, lots of collaboration; where it’s impossible to work until 3 a.m. without anyone noticing.” A unique group at the Plasma Science and Fusion Center (PSFC) looked promising: the High-Energy-Density Physics (HEDP) division, a lead partner in the National Nuclear Security Administration’s Center for Excellence at MIT.

      “It was a shot in the dark, just more of a whim than anything,” she says of her request to join HEDP on her application to MIT’s Department of Physics. “And then, somehow, they reached out to me. I told them I’m willing to learn about plasma. I didn’t know anything about it.”

      What she did know was that the HEDP group collaborates with other U.S. laboratories on an approach to creating fusion energy known as inertial confinement fusion (ICF). One version of the technique, known as direct-drive ICF, aims multiple laser beams symmetrically onto a spherical capsule filled with nuclear fuel. The other, indirect-drive ICF, instead aims multiple lasers beams into a gold cylindrical cavity called a hohlraum, within which the spherical fuel capsule is positioned. The laser beams are configured to hit the inner hohlraum wall, generating a “bath” of X-rays, which in turn compress the fuel capsule.

      Imploding the capsule generates intense fusion energy within a tiny fraction of a second (an order of tens of picoseconds). In August 2021, the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL) used this method to produce an historic fusion yield of 1.3 megajoules, putting researchers within reach of “ignition,” the point where the self-sustained fusion burn spreads into the surrounding fuel, leading to a high fusion-energy gain.  

      Joining the group just a month before this long-sought success, Dannhoff was impressed more with the response of her new teammates and the ICF community than with the scientific milestone. “I got a better appreciation for people who had spent their entire careers working on this project, just chugging along doing their best, ignoring the naysayers. I was excited for the people.”

      Dannhoff is now working toward extending the success of NIF and other ICF experiments, like the OMEGA laser at the University of Rochester’s Laboratory for Laser Energetics. Under the supervision of Senior Research Scientist Chikang Li, she is studying what happens to the flow of plasma within the hohlraum cavity during indirect ICF experiments, particularly for hohlraums with inner-wall aerogel foam linings. Experiments, over the last decade, have shown just how excruciatingly precise the symmetry in ICF targets must be. The more symmetric the X-ray drive, the more effective the implosion, and it is possible that these foam linings will improve the X-ray symmetry and drive efficiency.

      Dannhoff is specifically interested in studying the behavior of silicon and tantalum-based foam liners. She is as concerned with the challenges of the people at General Atomics (GA) and LLNL who are creating these targets as she is with the scientific outcome.

      “I just had a meeting with GA yesterday,” she notes. “And it’s a really tricky process. It’s kind of pushing the boundaries of what is doable at the moment. I got a much better sense of how demanding this project is for them, how much we’re asking of them.”

      What excites Dannhoff is the teamwork she observes, both at MIT and between ICF institutions around the United States. With roughly 10 graduate students and postdocs down the hall, each with an assigned lead role in lab management, she knows she can consult an expert on almost any question. And collaborators across the country are just an email away. “Any information that people can give you, they will give you, and usually very freely,” she notes. “Everyone just wants to see this work.”

      That Dannhoff is a natural team player is also evidenced in her hobbies. A hockey goalie, she prioritizes playing with MIT’s intramural teams, “because goalies are a little hard to come by. I just play with whoever needs a goalie on that night, and it’s a lot of fun.”

      She is also a member of the radio community, a fellowship she first embraced at Case Western — a moment she describes as a turning point in her life. “I literally don’t know who I would be today if I hadn’t figured out radio is something I’m interested in,” she admits. The MIT Radio Society provided the perfect landing pad for her arrival in Cambridge, full of the kinds of supportive, interesting, knowledgeable students she had befriended as an undergraduate. She credits radio with helping her realize that she could make her greatest contributions to science by focusing on engineering.

      Danhoff gets philosophical as she marvels at the invisible waves that surround us.

      “Not just radio waves: every wave,” she asserts. “The voice is the everywhere. Music, signal, space phenomena: it’s always around. And all we have to do is make the right little device and have the right circuit elements put in the right order to unmix and mix the signals and amplify them. And bada-bing, bada-boom, we’re talking with the universe.”

      “Maybe that epitomizes physics to me,” she adds. “We’re trying to listen to the universe, and it’s talking to us. We just have to come up with the right tools and hear what it’s trying to say.” More

    • 113 Shares149 Views

      in Energy

      MIT students contribute to success of historic fusion experiment

      by

      For more than half a century, researchers around the world have been engaged in attempts to achieve fusion ignition in a laboratory, a grand challenge of the 21st century. The High-Energy-Density Physics (HEDP) group at MIT’s Plasma Science and Fusion Center has focused on an approach called inertial confinement fusion (ICF), which uses lasers to implode a pellet of fuel in a quest for ignition. This group, including nine former and current MIT students, was crucial to an historic ICF ignition experiment performed in 2021; the results were published on the anniversary of that success.

      On Aug. 8, 2021, researchers at the National Ignition Facility (NIF), Lawrence Livermore National Laboratory (LLNL), used 192 laser beams to illuminate the inside of a tiny gold cylinder encapsulating a spherical capsule filled with deuterium-tritium fuel in their quest to produce significant fusion energy. Although researchers had followed this process many times before, using different parameters, this time the ensuing implosion produced an historic fusion yield of 1.37 megaJoules, as measured by a suite of neutron diagnostics. These included the MIT-developed and analyzed Magnetic Recoil Spectrometer (MRS). This result was published in Physical Review Letters on Aug. 8, the one-year anniversary of the ground-breaking development, unequivocally indicating that the first controlled fusion experiment reached ignition.

      Governed by the Lawson criterion, a plasma ignites when the internal fusion heating power is high enough to overcome the physical processes that cool the fusion plasma, creating a positive thermodynamic feedback loop that very rapidly increases the plasma temperature. In the case of ICF, ignition is a state where the fusion plasma can initiate a “fuel burn propagation” into the surrounding dense and cold fuel, enabling the possibility of high fusion-energy gain.

      “This historic result certainly demonstrates that the ignition threshold is a real concept, with well-predicted theoretical calculations, and that a fusion plasma can be ignited in a laboratory” says HEDP Division Head Johan Frenje.

      The HEDP division has contributed to the success of the ignition program at the NIF for more than a decade by providing and using a dozen diagnostics, implemented by MIT PhD students and staff, which have been critical for assessing the performance of an implosion. The hundreds of co-authors on the paper attest to the collaborative effort that went into this milestone. MIT’s contributors included the only student co-authors.

      “The students are responsible for implementing and using a diagnostic to obtain data important to the ICF program at the NIF, says Frenje. “Being responsible for running a diagnostic at the NIF has allowed them to actively participate in the scientific dialog and thus get directly exposed to cutting-edge science.”

      Students involved from the MIT Department of Physics were Neel Kabadi, Graeme Sutcliffe, Tim Johnson, Jacob Pearcy, and Ben Reichelt; students from the Department of Nuclear Science and Engineering included Brandon Lahmann, Patrick Adrian, and Justin Kunimune.

      In addition, former student Alex Zylstra PhD ’15, now a physicist at LLNL, was the experimental lead of this record implosion experiment. More