School of Engineering

Subterms

    More stories

    • 100 Shares99 Views

      in Energy

      New MIT internships expand research opportunities in Africa

      by

      With new support from the Office of the Associate Provost for International Activities, MIT International Science and Technology Initiatives (MISTI) and the MIT-Africa program are expanding internship opportunities for MIT students at universities and leading academic research centers in Africa. This past summer, MISTI supported 10 MIT student interns at African universities, significantly more than in any previous year.

      “These internships are an opportunity to better merge the research ecosystem of MIT with academia-based research systems in Africa,” says Evan Lieberman, the Total Professor of Political Science and Contemporary Africa and faculty director for MISTI.

      For decades, MISTI has helped MIT students to learn and explore through international experiential learning opportunities and internships in industries like health care, education, agriculture, and energy. MISTI’s MIT-Africa Seed Fund supports collaborative research between MIT faculty and Africa-based researchers, and the new student research internship opportunities are part of a broader vision for deeper engagement between MIT and research institutions across the African continent.

      While Africa is home to 12.5 percent of the world’s population, it generates less than 1 percent of scientific research output in the form of academic journal publications, according to the African Academy of Sciences. Research internships are one way that MIT can build mutually beneficial partnerships across Africa’s research ecosystem, to advance knowledge and spawn innovation in fields important to MIT and its African counterparts, including health care, biotechnology, urban planning, sustainable energy, and education.

      Ari Jacobovits, managing director of MIT-Africa, notes that the new internships provide additional funding to the lab hosting the MIT intern, enabling them to hire a counterpart student research intern from the local university. This support can make the internships more financially feasible for host institutions and helps to grow the research pipeline.

      With the support of MIT, State University of Zanzibar (SUZA) lecturers Raya Ahmada and Abubakar Bakar were able to hire local students to work alongside MIT graduate students Mel Isidor and Rajan Hoyle. Together the students collaborated over a summer on a mapping project designed to plan and protect Zanzibar’s coastal economy.

      “It’s been really exciting to work with research peers in a setting where we can all learn alongside one another and develop this project together,” says Hoyle.

      Using low-cost drone technology, the students and their local counterparts worked to create detailed maps of Zanzibar to support community planning around resilience projects designed to combat coastal flooding and deforestation and assess climate-related impacts to seaweed farming activities. 

      “I really appreciated learning about how engagement happens in this particular context and how community members understand local environmental challenges and conditions based on research and lived experience,” says Isidor. “This is beneficial for us whether we’re working in an international context or in the United States.”

      For biology major Shaida Nishat, her internship at the University of Cape Town allowed her to work in a vital sphere of public health and provided her with the chance to work with a diverse, international team headed by Associate Professor Salome Maswine, head of the global surgery division and a widely-renowned expert in global surgery, a multidisciplinary field in the sphere of global health focused on improved and equitable surgical outcomes.

      “It broadened my perspective as to how an effort like global surgery ties so many nations together through a common goal that would benefit them all,” says Nishat, who plans to pursue a career in public health.

      For computer science sophomore Antonio L. Ortiz Bigio, the MISTI research internship in Africa was an incomparable experience, culturally and professionally. Bigio interned at the Robotics Autonomous Intelligence and Learning Laboratory at the University of Witwatersrand in Johannesburg, led by Professor Benjamin Rosman, where he developed software to enable a robot to play chess. The experience has inspired Bigio to continue to pursue robotics and machine learning.

      Participating faculty at the host institutions welcomed their MIT interns, and were impressed by their capabilities. Both Rosman and Maswime described their MIT interns as hard-working and valued team members, who had helped to advance their own work.  

      Building strong global partnerships, whether through faculty research, student internships, or other initiatives, takes time and cultivation, explains Jacobovits. Each successful collaboration helps to seed future exchanges and builds interest at MIT and peer institutions in creative partnerships. As MIT continues to deepen its connections to institutions and researchers across Africa, says Jacobovits, “students like Shaida, Rajan, Mel, and Antonio are really effective ambassadors in building those networks.” More

    • 138 Shares149 Views

      in Energy

      Ian Hutchinson: A lifetime probing plasma, on Earth and in space

      by

      Ordinary folks gazing at the night sky can readily spot Earth’s close neighbors and the light of distant stars. But when Ian Hutchinson scans the cosmos, he takes in a great deal more. There is, for instance, the constant rush of plasma — highly charged ionized gases — from the sun. As this plasma flows by solid bodies such as the moon, it interacts with them electromagnetically, sometimes generating a phenomenon called an electron hole — a perturbation in the gaseous solar tide that forms a solitary, long-lived wave. Hutchinson, a professor in the MIT Department of Nuclear Science and Engineering (NSE), knows they exist because he found a way to measure them.

      “When I look up at the moon with my sweetheart, my wife of 48 years, I imagine that streaming from its dark side are electron holes that my students and I predicted, and that we then discovered,” he says. “It’s quite sentimental to me.”

      Hutchinson’s studies of these wave phenomena, summed up in a paper, “Electron holes in phase space: What they are and why they matter,” recently earned the 2022 Ronald C. Davidson Award for Plasma Physics presented by the American Physical Society’s Division of Plasma Physics.

      Measuring perturbations in plasma

      Hutchinson’s exploration of electron holes was sparked by his work over many decades in fusion energy, another branch of plasma physics. He has made many contributions to the design, operation, and experimental investigation of tokamaks — a toroidal magnetic confinement device — intended to replicate and harness the fiery thermonuclear reactions in the plasma of stars for carbon-free energy on Earth. Hutchinson took a particular interest in how to measure the plasma, notably the flow at the edges of tokamaks.

      Heat generated from fusion reactions may escape magnetic confinement and build up along these edges, leading to potential temperature spikes that impact the performance of the confinement device. Hutchinson discovered how to interpret signals from small probes to measure and track plasma velocity at the tokamak’s edge.

      “My theoretical work also showed that these probes quite likely induce electron holes,” he says. But proving this contention required experiments at resolutions in time and space beyond what tokamaks allow. That’s when Hutchinson had an important insight.

      “I realized that the phenomena we were trying to investigate can actually be measured with exquisite accuracy by satellites that travel through plasma surrounding Earth and other solid bodies,” he says. Although plasmas in space are at a much larger scale than the plasmas generated in the laboratory, measurements of these gases by a satellite is analogous “to a situation where we fly a tiny micron-sized spacecraft through the wakes of probes at the edge of tokamaks,” says Hutchinson.

      Using satellite data provided by NASA, Hutchinson set about analyzing solar plasma as it whips by the moon. “We predicted instabilities and the generation of electron holes,” he recounts. “Our theory passed with flying colors: We saw lots of holes in the wake of the moon, and few elsewhere.”

      Developing tokamaks

      Hutchinson grew up in the English midlands and attended Cambridge University, where he became “intrigued by plasma physics in a course taught by an entertaining and effective teacher,” he says.

      Hutchinson headed for doctoral studies at Australian National University on fellowship. The experience afforded him his first opportunity for research on plasma confinement. “There I was at the ends of the Earth, and I was one of very few scientists worldwide with a tokamak almost to myself,” he says. “It was a device that had risen to the top of everyone’s agenda in fusion research as something we really needed to understand.”

      His dissertation, which examined instabilities in plasma, and his hands-on experience with the device, brought him to the attention of Ronald Parker SM ’63, PhD ’67, now emeritus professor of nuclear science and engineering and electrical engineering and computer science, who was building MIT’s Alcator tokamak program.

      In 1976, Hutchinson joined this group, spending three years as a research scientist. After an interval in Britain, he returned to MIT with a faculty position in NSE, and soon, a leadership role in developing the next phase of the Institute’s fusion experiment, the Alcator-C Mod tokamak.

      “This was a major development of the high-magnetic field approach to fusion,” says Hutchinson. Powerful magnets are essential for containing the superhot plasma; the MIT group developed an experiment with a magnetic field more than 150,000 times the strength of the Earth’s magnetic field. “We were in the business of determining whether tokamaks had sufficiently good confinement to function as fusion reactors,” he says.

      Hutchinson oversaw the nearly six-year construction of the device, which was funded by the U.S. Department of Energy. He then led its operation starting in 1993, creating a national facility for experiments that drew scientists and students from around the world. At the time, it was the largest research group on campus at MIT.

      In their studies, scientists employed novel heating and sustainment techniques using radio waves and microwaves. They also discovered new methods for performing diagnostics inside the tokamak. “Alcator C-Mod demonstrated excellent confinement in a more compact and cost-effective device,” says Hutchinson. “It was unique in the world.”

      Hutchinson is proud of Alcator C-Mod’s technological achievements, including its record for highest plasma pressure for a magnetic confinement device. But this large-scale project holds even greater significance for him. “Alcator C-Mod helped beat a new path in fusion research, and has become the basis for the SPARC tokamak now under construction,” he says.

      SPARC is a compact, high-magnetic field fusion energy device under development through a collaboration between MIT’s Plasma Science and Fusion Center and startup Commonwealth Fusions Systems. Its goal is to demonstrate net energy gain from fusion, prove the viability of fusion as a source of carbon-free energy, and tip the scales in the race against climate change. A number of SPARC’s leaders are students Hutchinson taught. “This is a source of considerable satisfaction,” he says. “Some of their down-to-Earth realism comes from me, and perhaps some of their aspirations have been molded by their work with me.” 

      A new phase

      After leading Alcator C-Mod for 15 years and generating hundreds of journal articles, Hutchinson served as NSE’s department head from 2003 to 2009. He wrote the standard textbook on measuring plasmas, and has more recently written “A Student’s Guide to Numerical Methods” (2015), which evolved from a course he taught to introduce graduate students to computational problem-solving in physics and engineering.

      After this, his 40th year on the MIT faculty, Hutchinson will be stepping back from teaching. “It’s important for new generations of students to be taught by people at the pinnacle of their mental and intellectual capacity, and when you reach my age, you’re aware of the fact that you’re slowing down,” he says.

      Hutchinson’s at no loss for ways to spend his time. As a devout Christian, he speaks and writes about the relationship between religion and science, trying to help skeptics on both sides find common ground. He sings in two choral groups, and is very busy grandparenting four grandsons. For a complete change of pace, Hutchinson goes fly fishing.

      But he still has plans to explore new frontiers in plasma physics. “I’m gratified to say I still do important research,” he says. “I’ve solved most of the problems in electron holes, and now I need to say something about ion holes!” More

    • 88 Shares159 Views

      in Environment

      Sustainable supply chains put the customer first

      by

      When we consider the supply chain, we typically think of factories, ships, trucks, and warehouses. Yet, the customer side is equally important, especially in efforts to make our distribution networks more sustainable. Customers are an untapped resource in building sustainability, says Josué C. Velázquez Martínez, a research scientist at MIT Center for Transportation and Logistics. 

      Velázquez Martínez, who is director of MIT’s Sustainable Supply Chain Lab, investigates how customer-facing supply chains can be made more environmentally and socially sustainable. One way is a Green Button project that explores how to optimize e-commerce delivery schedules to reduce carbon emissions and persuade customers to use less carbon-intensive four- or five-day shipping options instead of one or two days. Velázquez Martínez has also launched the MIT Low Income Firms Transformation (LIFT) Lab that is researching ways to improve micro-retailer supply chains in the developing world to provide owners with the necessary tools for survival.  

      “The definition of sustainable supply chain keeps evolving because things that were sustainable 20 to 30 years ago are not as sustainable now,” says Velázquez Martínez. “Today, there are more companies that are capturing information to build strategies for environmental, economic, and social sustainability. They are investing in alternative energy and other solutions to make the supply chain more environmentally friendly and are tracking their suppliers and identifying key vulnerabilities. A big part of this is an attempt to create fairer conditions for people who work in supply chains or are dependent on them.”

      Play video

      The move toward sustainable supply chain is being driven as much by people as by companies, whether they are playing the role of selective consumer or voting citizens. The consumer aspect is often overlooked, says Velázquez Martínez. “Consumers are the ones who move the supply chain. We are looking at how companies can provide transparency to involve customers in their sustainability strategy.” 

      Proposed solutions for sustainability are not always as effective as promised. Some fashion rental schemes fall into this category, says Velázquez Martínez. “There are many new rental companies that are trying to get more use out of clothes to offset the emissions associated with production. We recently researched the environmental impact of monthly subscription models where consumers pay a fee to receive clothes for a month before returning them, as well as peer-to-peer sharing models.” 

      The researchers found that while rental services generally have a lower carbon footprint than retail sales, hidden emissions from logistics played a surprisingly large role. “First, you need to deliver the clothes and pick them up, and there are high return rates,” says Velázquez Martínez. “When you factor in dry cleaning and packaging emissions, the rental models in some cases have a worse carbon footprint than buying new clothes.” Peer-to-peer sharing could be better, he adds, but that depends on how far the consumers travel to meet-up points. 

      Typically, says Velázquez Martínez, garment types that are frequently used are not well suited to rental models. “But for specialty clothes such as wedding dresses or prom dresses, it is better to rent.” 

      Waiting a few days to save the planet 

      Even before the pandemic, online retailing gained a second wind due to low-cost same- and next-day delivery options. While e-commerce may have its drawbacks as a contributor to social isolation and reduced competition, it has proven itself to be far more eco-friendly than brick-and-mortar shopping, not to mention a lot more convenient. Yet rapid deliveries are cutting into online-shopping’s carbon-cutting advantage.

      In 2019, MIT’s Sustainable Supply Chain Lab launched a Green Bottle project to study the rapid delivery phenomenon. The project has been “testing whether consumers would be willing to delay their e-commerce deliveries to reduce the environmental impact of fast shipping,” says Velázquez Martínez. “Many companies such as Walmart and Target have followed Amazon’s 2019 strategy of moving from two-day to same-day delivery. Instead of sending a fully loaded truck to a neighborhood every few days, they now send multiple trucks to that neighborhood every day, and there are more days when trucks are targeting each neighborhood. All this increases carbon emissions and makes it hard for shippers to consolidate. ”  

      Working with Coppel, one of Mexico’s largest retailers, the Green Button project inspired a related Consolidation Ecommerce Project that built a large-scale mathematical model to provide a strategy for consolidation. The model determined what delivery time window each neighborhood demands and then calculated the best day to deliver to each neighborhood to meet the desired window while minimizing carbon emissions. 

      No matter what mixture of delivery times was used, the consolidation model helped retailers schedule deliveries more efficiently. Yet, the biggest cuts in emissions emerged when customers were willing to wait several days.

      Play video

      “When we ran a month-long simulation comparing our model for four-to-five-day delivery with Coppel’s existing model for one- or two-day delivery, we saw savings in fuel consumption of over 50 percent on certain routes” says Velázquez Martínez. “This is huge compared to other strategies for squeezing more efficiency from the last-mile supply chain, such as routing optimization, where savings are close to 5 percent. The optimal solution depends on factors such as the capacity for consolidation, the frequency of delivery, the store capacity, and the impact on inbound operations.” 

      The researchers next set out to determine if customers could be persuaded to wait longer for deliveries. Considering that the price differential is low or nonexistent, this was a considerable challenge. Yet, the same day habit is only a few years old, and some consumers have come to realize they don’t always need rapid deliveries. “Some consumers who order by rapid delivery find they are too busy to open the packages right away,” says Velázquez Martínez.  

      Trees beat kilograms of CO2

      The researchers set out to find if consumers would be willing to sacrifice a bit of convenience if they knew they were helping to reduce climate change. The Green Button project tested different public outreach strategies. For one test group, they reported the carbon impact of delivery times in kilograms of carbon dioxide (CO2). Another group received the information expressed in terms of the energy required to recycle a certain amount of garbage. A third group learned about emissions in terms of the number of trees required to trap the carbon. “Explaining the impact in terms of trees led to almost 90 percent willing to wait another day or two,” says Velázquez Martínez. “This is compared to less than 40 percent for the group that received the data in kilograms of CO2.” 

      Another surprise was that there was no difference in response based on income, gender, or age. “Most studies of green consumers suggest they are predominantly high income, female, highly educated, or younger,” says Velázquez Martínez. “However, our results show that the differences were the same between low and high income, women and men, and younger and older people. We have shown that disclosing emissions transparently and making the consumer a part of the strategy can be a new opportunity for more consumer-driven logistics sustainability.” 

      The researchers are now developing similar models for business-to-business (B2B) e-commerce. “We found that B2B supply chain emissions are often high because many shipping companies require strict delivery windows,” says Velázquez Martínez.  

      The B2B models drill down to examine the Corporate Value Chain (Scope 3) emissions of suppliers. “Although some shipping companies are now asking their suppliers to review emissions, it is a challenge to create a transparent supply chain,” says Velázquez Martínez.  “Technological innovations have made it easier, starting with RFID [radio frequency identification], and then real-time GPS mapping and blockchain. But these technologies need to be more accessible and affordable, and we need more companies willing to use them.” 

      Some companies have been hesitant to dig too deeply into their supply chain, fearing they might uncover a scandal that might risk their reputation, says Velázquez Martínez. Other organizations are forced to look at the issue when nongovernmental organizations research sustainability issues such as social injustice in sweat shops and conflict mineral mines. 

      One challenge to building a transparent supply chain is that “in many companies, the sustainability teams are separate from the rest of the company,” says Velázquez Martínez. “Even if the CEOs receive information on sustainability issues, it often doesn’t filter down because the information does not belong to the planners or managers. We are pushing companies to not only account for sustainability factors in supply chain network design but also examine daily operations that affect sustainability. This is a big topic now: How can we translate sustainability information into something that everybody can understand and use?” 

      LIFT Lab lifts micro-retailers  

      In 2016, Velázquez Martínez launched the MIT GeneSys project to gain insights into micro and small enterprises (MSEs) in developing countries. The project released a GeneSys mobile app, which was used by more than 500 students throughout Latin America to collect data on more than 800 microfirms. In 2022, he launched the LIFT Lab, which focuses more specifically on studying and improving the supply chain for MSEs.  

      Worldwide, some 90 percent of companies have fewer than 10 employees. In Latin America and the Caribbean, companies with fewer than 50 employees represent 99 percent of all companies and 47 percent of employment. 

      Although MSEs represent much of the world’s economy, they are poorly understood, notes Velázquez Martínez. “Those tiny businesses are driving a lot of the economy and serve as important customers for the large companies working in developing countries. They range from small businesses down to people trying to get some money to eat by selling cakes or tacos through their windows.”  

      The MIT LIFT Lab researchers investigated whether MSE supply chain issues could help shed light on why many Latin American countries have been limited to marginal increases in gross domestic product. “Large companies from the developed world that are operating in Latin America, such as Unilever, Walmart, and Coca-Cola, have huge growth there, in some cases higher than they have in the developed world,” says Velázquez Martínez. “Yet, the countries are not developing as fast as we would expect.” 

      The LIFT Lab data showed that while the multinationals are thriving in Latin America, the local MSEs are decreasing in productivity. The study also found the trend has worsened with Covid-19.  

      The LIFT Lab’s first big project, which is sponsored by Mexican beverage and retail company FEMSA, is studying supply chains in Mexico. The study spans 200,000 micro-retailers and 300,000 consumers. In a collaboration with Tecnológico de Monterrey, hundreds of students are helping with a field study.  

      “We are looking at supply chain management and business capabilities and identifying the challenges to adoption of technology and digitalization,” says Velázquez Martínez. “We want to find the best ways for micro-firms to work with suppliers and consumers by identifying the consumers who access this market, as well as the products and services that can best help the micro-firms drive growth.” 

      Based on the earlier research by GeneSys, Velázquez Martínez has developed some hypotheses for potential improvements for micro-retailer supply chain, starting with payment terms. “We found that the micro-firms often get the worst purchasing deals. Owners without credit cards and with limited cash often buy in smaller amounts at much higher prices than retailers like Walmart. The big suppliers are squeezing them.” 

      While large retailers usually get 60 to 120 days to pay, micro-retailers “either pay at the moment of the transaction or in advance,” says Velázquez Martínez. “In a study of 500 micro-retailers in five countries in Latin America, we found the average payment time was minus seven days payment in advance. These terms reduce cash availability and often lead to bankruptcy.” 

      LIFT Lab is working with suppliers to persuade them to offer a minimum payment time of two weeks. “We can show the suppliers that the change in terms will let them move more product and increase sales,” says Velázquez Martínez. “Meanwhile, the micro-retailers gain higher profits and become more stable, even if they may pay a bit more.” 

      LIFT Lab is also looking at ways that micro-retailers can leverage smartphones for digitalization and planning. “Some of these companies are keeping records on napkins,” says Velázquez Martínez. “By using a cellphone, they can charge orders to suppliers and communicate with consumers. We are testing different dashboards for mobile apps to help with planning and financial performance. We are also recommending services the stores can provide, such as paying electricity or water bills. The idea is to build more capabilities and knowledge and increase business competencies for the supply chain that are tailored for micro-retailers.” 

      From a financial perspective, micro-retailers are not always the most efficient way to move products. Yet they also play an important role in building social cohesion within neighborhoods. By offering more services, the corner bodega can bring people together in ways that are impossible with e-commerce and big-box stores.  

      Whether the consumers are micro-firms buying from suppliers or e-commerce customers waiting for packages, “transparency is key to building a sustainable supply chain,” says Velázquez Martínez. “To change consumer habits, consumers need to be better educated on the impacts of their behaviors. With consumer-facing logistics, ‘The last shall be first, and the first last.’” More

    • 50 Shares149 Views

      in Energy

      Strengthening electron-triggered light emission

      by

      The way electrons interact with photons of light is a key part of many modern technologies, from lasers to solar panels to LEDs. But the interaction is inherently a weak one because of a major mismatch in scale: A wavelength of visible light is about 1,000 times larger than an electron, so the way the two things affect each other is limited by that disparity.

      Now, researchers at MIT and elsewhere have come up with an innovative way to make much stronger interactions between photons and electrons possible, in the process producing a hundredfold increase in the emission of light from a phenomenon called Smith-Purcell radiation. The finding has potential implications for both commercial applications and fundamental scientific research, although it will require more years of research to make it practical.

      The findings are reported today in the journal Nature, in a paper by MIT postdocs Yi Yang (now an assistant professor at the University of Hong Kong) and Charles Roques-Carmes, MIT professors Marin Soljačić and John Joannopoulos, and five others at MIT, Harvard University, and Technion-Israel Institute of Technology.

      In a combination of computer simulations and laboratory experiments, the team found that using a beam of electrons in combination with a specially designed photonic crystal — a slab of silicon on an insulator, etched with an array of nanometer-scale holes — they could theoretically predict stronger emission by many orders of magnitude than would ordinarily be possible in conventional Smith-Purcell radiation. They also experimentally recorded a one hundredfold increase in radiation in their proof-of-concept measurements.

      Unlike other approaches to producing sources of light or other electromagnetic radiation, the free-electron-based method is fully tunable — it can produce emissions of any desired wavelength, simply by adjusting the size of the photonic structure and the speed of the electrons. This may make it especially valuable for making sources of emission at wavelengths that are difficult to produce efficiently, including terahertz waves, ultraviolet light, and X-rays.

      The team has so far demonstrated the hundredfold enhancement in emission using a repurposed electron microscope to function as an electron beam source. But they say that the basic principle involved could potentially enable far greater enhancements using devices specifically adapted for this function.

      The approach is based on a concept called flatbands, which have been widely explored in recent years for condensed matter physics and photonics but have never been applied to affecting the basic interaction of photons and free electrons. The underlying principle involves the transfer of momentum from the electron to a group of photons, or vice versa. Whereas conventional light-electron interactions rely on producing light at a single angle, the photonic crystal is tuned in such a way that it enables the production of a whole range of angles.

      The same process could also be used in the opposite direction, using resonant light waves to propel electrons, increasing their velocity in a way that could potentially be harnessed to build miniaturized particle accelerators on a chip. These might ultimately be able to perform some functions that currently require giant underground tunnels, such as the 30-kilometer-wide Large Hadron Collider in Switzerland.

      “If you could actually build electron accelerators on a chip,” Soljačić says, “you could make much more compact accelerators for some of the applications of interest, which would still produce very energetic electrons. That obviously would be huge. For many applications, you wouldn’t have to build these huge facilities.”

      The new system could also potentially provide a highly controllable X-ray beam for radiotherapy purposes, Roques-Carmes says.

      And the system could be used to generate multiple entangled photons, a quantum effect that could be useful in the creation of quantum-based computational and communications systems, the researchers say. “You can use electrons to couple many photons together, which is a considerably hard problem if using a purely optical approach,” says Yang. “That is one of the most exciting future directions of our work.”

      Much work remains to translate these new findings into practical devices, Soljačić cautions. It may take some years to develop the necessary interfaces between the optical and electronic components and how to connect them on a single chip, and to develop the necessary on-chip electron source producing a continuous wavefront, among other challenges.

      “The reason this is exciting,” Roques-Carmes adds, “is because this is quite a different type of source.” While most technologies for generating light are restricted to very specific ranges of color or wavelength, and “it’s usually difficult to move that emission frequency. Here it’s completely tunable. Simply by changing the velocity of the electrons, you can change the emission frequency. … That excites us about the potential of these sources. Because they’re different, they offer new types of opportunities.”

      But, Soljačić concludes, “in order for them to become truly competitive with other types of sources, I think it will require some more years of research. I would say that with some serious effort, in two to five years they might start competing in at least some areas of radiation.”

      The research team also included Steven Kooi at MIT’s Institute for Soldier Nanotechnologies, Haoning Tang and Eric Mazur at Harvard University, Justin Beroz at MIT, and Ido Kaminer at Technion-Israel Institute of Technology. The work was supported by the U.S. Army Research Office through the Institute for Soldier Nanotechnologies, the U.S. Air Force Office of Scientific Research, and the U.S. Office of Naval Research. More

    • 100 Shares179 Views

      in Environment

      MIT community in 2022: A year in review

      by

      In 2022, MIT returned to a bit of normalcy after the challenge of Covid-19 began to subside. The Institute prepared to bid farewell to its president and later announced his successor; announced five flagship projects in a new competition aimed at tackling climate’s greatest challenges; made new commitments toward ensuring support for diverse voices; and celebrated the reopening of a reimagined MIT Museum — as well as a Hollywood blockbuster featuring scenes from campus. Here are some of the top stories in the MIT community this year.

      Presidential transition

      In February, MIT President L. Rafael Reif announced that he planned to step down at the end of 2022. In more than 10 years as president, Reif guided MIT through a period of dynamic growth, greatly enhancing its global stature and magnetism. At the conclusion of his term at the end of this month, Reif will take a sabbatical, then return to the faculty of the Department of Electrical Engineering and Computer Science. In September, Reif expressed his gratitude to the MIT community at an Institute-wide dance celebration, and he was honored with a special MIT Dome lighting earlier this month.

      After an extensive presidential search, Sally Kornbluth, a cell biologist and the current provost of Duke University, was announced in October as MIT’s 18th president. Following an introduction to MIT that included a press conference, welcoming event, and community celebration, Kornbluth will assume the MIT presidency on Jan. 1, 2023.

      In other administrative transitions: Cynthia Barnhart was appointed provost after Martin Schmidt stepped down to become president of Rensselaer Polytechnic Institute; Sanjay Sarma stepped down as vice president for open learning after nine years in the role; professors Brent Ryan and Anne White were named associate provosts, while White was also named associate vice president for research administration; and Agustín Rayo was named dean of the School of Humanities, Arts, and Social Sciences.

      Climate Grand Challenges

      MIT announced five flagship projects in its first-ever Climate Grand Challenges competition. These multiyear projects focus on unraveling some of the toughest unsolved climate problems and bringing high-impact, science-based solutions to the world on an accelerated basis. Representing the most promising concepts to emerge from the two-year competition that yielded 27 finalist projects, the five flagship projects will receive additional funding and resources from MIT and others to develop their ideas and swiftly transform them into practical solutions at scale.

      CHIPS and Science Act

      President Reif and Vice President for Research Maria Zuber were among several MIT representatives to witness President Biden’s signing of the $52 billion “CHIPS and Science” bill into law in August. Reif helped shape aspects of the bill and was a vocal advocate for it among university and government officials, while Zuber served on two government science advisory boards during the bill’s gestation and consideration. Earlier in the year, MIT.nano hosted U.S. Secretary of Commerce Gina Raimondo, while MIT researchers released a key report on U.S. microelectronics research and manufacturing.

      MIT Morningside Academy for Design

      Supported by a $100 million founding gift, the MIT Morningside Academy for Design launched as a major interdisciplinary center that aims to build on the Institute’s leadership in design-focused education. Housed in the School of Architecture and Planning, the academy provides a hub that will encourage design work at MIT to grow and cross disciplines among engineering, science, management, computing, architecture, urban planning, and the arts.

      Reports of the Institute

      A number of key Institute reports and announcements were released in 2022. They include: an announcement of the future of gift acceptance for MIT: an announcement of priority MIT investments; a new MIT Values Statement; a renewed commitment to Indigenous scholarship and community; the Strategic Action Plan for Belonging, Achievement, and Composition; a report on MIT’s engagement with China; a report of the Working Group on Reimagining Public Safety at MIT; a report of the Indigenous Working Group; and a report of the Ad Hoc Committee on Arts, Culture, and DEI.

      Nobel Prizes

      MIT affiliates were well-represented among new and recent Nobel laureates who took part in the first in-person Nobel Prize ceremony since the start of the Covid-19 pandemic. MIT-affiliated winners for 2022 included Ben Bernanke PhD ’79, K. Barry Sharpless, and Carolyn Bertozzi. Winners in attendance from 2020 and 2021 included Professor Joshua Angrist, David Julius ’77, and Andrea Ghez ’87.

      New MIT Museum

      A reimagined MIT Museum opened this fall in a new 56,000-square-foot space in the heart of Cambridge’s Kendall Square. The museum invites visitors to explore the Institute’s innovations in science, technology, engineering, arts, and math — and to take part in that work with hands-on learning labs and maker spaces, interactive exhibits, and venues to discuss the impact of science and technology on society.

      “Wakanda Forever”

      In November, the Institute Office of Communications and the Division of Student Life hosted a special screening of Marvel Studios’ “Black Panther: Wakanda Forever.” The MIT campus had been used as a filming location in summer 2021, as one of the film’s characters, Riri Williams (also known as Ironheart), is portrayed as a student at the Institute.

      In-person Commencement returns

      After two years of online celebrations due to Covid-19, MIT Commencement returned to Killian Court at the end of May. World Trade Organization Director-General Ngozi Okonjo-Iweala MCP ’78, PhD ’81 delivered the Commencement address, while poet Kealoha Wong ’99 spoke at a special ceremony for the classes of 2020 and 2021.

      Students win distinguished fellowships

      As in previous years, MIT students continued to shine. This year, exceptional undergraduates were awarded Fulbright, Marshall, Mitchell, Rhodes, and Schwarzman scholarships.

      Remembering those we’ve lost

      Among MIT community members who died this year were Robert Balluffi, Louis Braida, Ashton Carter, Tom Eagar, Dick Eckaus, Octavian-Eugen Ganea, Peter Griffith, Patrick Hale, Frank Sidney Jones, Nonabah Lane, Leo Marx, Bruce Montgomery, Joel Moses, Brian Sousa Jr., Mohamed Magdi Taha, John Tirman, Richard Wurtman, and Markus Zahn.

      In case you missed it:

      Additional top community stories of 2022 included MIT students dominating the 82nd Putnam Mathematical Competition, an update on MIT’s reinstating the SAT/ACT requirement for admissions, a new mathematics program for Ukrainian students and refugees, a roundup of new books from MIT authors, the renaming of the MIT.nano building, an announcement of winners of this year’s MIT $100K Entrepreneurship Competition, the new MIT Wright Brothers Wind Tunnel, and MIT students winning the 45th International Collegiate Programming Contest for the first time in 44 years. More

    • 50 Shares129 Views

      in Energy

      Manufacturing a cleaner future

      by

      Manufacturing had a big summer. The CHIPS and Science Act, signed into law in August, represents a massive investment in U.S. domestic manufacturing. The act aims to drastically expand the U.S. semiconductor industry, strengthen supply chains, and invest in R&D for new technological breakthroughs. According to John Hart, professor of mechanical engineering and director of the Laboratory for Manufacturing and Productivity at MIT, the CHIPS Act is just the latest example of significantly increased interest in manufacturing in recent years.

      “You have multiple forces working together: reflections from the pandemic’s impact on supply chains, the geopolitical situation around the world, and the urgency and importance of sustainability,” says Hart. “This has now aligned incentives among government, industry, and the investment community to accelerate innovation in manufacturing and industrial technology.”

      Hand-in-hand with this increased focus on manufacturing is a need to prioritize sustainability.

      Roughly one-quarter of greenhouse gas emissions came from industry and manufacturing in 2020. Factories and plants can also deplete local water reserves and generate vast amounts of waste, some of which can be toxic.

      To address these issues and drive the transition to a low-carbon economy, new products and industrial processes must be developed alongside sustainable manufacturing technologies. Hart sees mechanical engineers as playing a crucial role in this transition.

      “Mechanical engineers can uniquely solve critical problems that require next-generation hardware technologies, and know how to bring their solutions to scale,” says Hart.

      Several fast-growing companies founded by faculty and alumni from MIT’s Department of Mechanical Engineering offer solutions for manufacturing’s environmental problem, paving the path for a more sustainable future.

      Gradiant: Cleantech water solutions

      Manufacturing requires water, and lots of it. A medium-sized semiconductor fabrication plant uses upward of 10 million gallons of water a day. In a world increasingly plagued by droughts, this dependence on water poses a major challenge.

      Gradiant offers a solution to this water problem. Co-founded by Anurag Bajpayee SM ’08, PhD ’12 and Prakash Govindan PhD ’12, the company is a pioneer in sustainable — or “cleantech” — water projects.

      As doctoral students in the Rohsenow Kendall Heat Transfer Laboratory, Bajpayee and Govindan shared a pragmatism and penchant for action. They both worked on desalination research — Bajpayee with Professor Gang Chen and Govindan with Professor John Lienhard.

      Inspired by a childhood spent during a severe drought in Chennai, India, Govindan developed for his PhD a humidification-dehumidification technology that mimicked natural rainfall cycles. It was with this piece of technology, which they named Carrier Gas Extraction (CGE), that the duo founded Gradiant in 2013.

      The key to CGE lies in a proprietary algorithm that accounts for variability in the quality and quantity in wastewater feed. At the heart of the algorithm is a nondimensional number, which Govindan proposes one day be called the “Lienhard Number,” after his doctoral advisor.

      “When the water quality varies in the system, our technology automatically sends a signal to motors within the plant to adjust the flow rates to bring back the nondimensional number to a value of one. Once it’s brought back to a value of one, you’re running in optimal condition,” explains Govindan, who serves as chief operating officer of Gradiant.

      This system can treat and clean the wastewater produced by a manufacturing plant for reuse, ultimately conserving millions of gallons of water each year.

      As the company has grown, the Gradiant team has added new technologies to their arsenal, including Selective Contaminant Extraction, a cost-efficient method that removes only specific contaminants, and a brine-concentration method called Counter-Flow Reverse Osmosis. They now offer a full technology stack of water and wastewater treatment solutions to clients in industries including pharmaceuticals, energy, mining, food and beverage, and the ever-growing semiconductor industry.

      “We are an end-to-end water solutions provider. We have a portfolio of proprietary technologies and will pick and choose from our ‘quiver’ depending on a customer’s needs,” says Bajpayee, who serves as CEO of Gradiant. “Customers look at us as their water partner. We can take care of their water problem end-to-end so they can focus on their core business.”

      Gradiant has seen explosive growth over the past decade. With 450 water and wastewater treatment plants built to date, they treat the equivalent of 5 million households’ worth of water each day. Recent acquisitions saw their total employees rise to above 500.

      The diversity of Gradiant’s solutions is reflected in their clients, who include Pfizer, AB InBev, and Coca-Cola. They also count semiconductor giants like Micron Technology, GlobalFoundries, Intel, and TSMC among their customers.

      “Over the last few years, we have really developed our capabilities and reputation serving semiconductor wastewater and semiconductor ultrapure water,” says Bajpayee.

      Semiconductor manufacturers require ultrapure water for fabrication. Unlike drinking water, which has a total dissolved solids range in the parts per million, water used to manufacture microchips has a range in the parts per billion or quadrillion.

      Currently, the average recycling rate at semiconductor fabrication plants — or fabs — in Singapore is only 43 percent. Using Gradiant’s technologies, these fabs can recycle 98-99 percent of the 10 million gallons of water they require daily. This reused water is pure enough to be put back into the manufacturing process.

      “What we’ve done is eliminated the discharge of this contaminated water and nearly eliminated the dependence of the semiconductor fab on the public water supply,” adds Bajpayee.

      With new regulations being introduced, pressure is increasing for fabs to improve their water use, making sustainability even more important to brand owners and their stakeholders.

      As the domestic semiconductor industry expands in light of the CHIPS and Science Act, Gradiant sees an opportunity to bring their semiconductor water treatment technologies to more factories in the United States.

      Via Separations: Efficient chemical filtration

      Like Bajpayee and Govindan, Shreya Dave ’09, SM ’12, PhD ’16 focused on desalination for her doctoral thesis. Under the guidance of her advisor Jeffrey Grossman, professor of materials science and engineering, Dave built a membrane that could enable more efficient and cheaper desalination.

      A thorough cost and market analysis brought Dave to the conclusion that the desalination membrane she developed would not make it to commercialization.

      “The current technologies are just really good at what they do. They’re low-cost, mass produced, and they worked. There was no room in the market for our technology,” says Dave.

      Shortly after defending her thesis, she read a commentary article in the journal Nature that changed everything. The article outlined a problem. Chemical separations that are central to many manufacturing processes require a huge amount of energy. Industry needed more efficient and cheaper membranes. Dave thought she might have a solution.

      After determining there was an economic opportunity, Dave, Grossman, and Brent Keller PhD ’16 founded Via Separations in 2017. Shortly thereafter, they were chosen as one of the first companies to receive funding from MIT’s venture firm, The Engine.

      Currently, industrial filtration is done by heating chemicals at very high temperatures to separate compounds. Dave likens it to making pasta by boiling all of the water off until it evaporates and all you are left with is the pasta noodles. In manufacturing, this method of chemical separation is extremely energy-intensive and inefficient.

      Via Separations has created the chemical equivalent of a “pasta strainer.” Rather than using heat to separate, their membranes “strain” chemical compounds. This method of chemical filtration uses 90 percent less energy than standard methods.

      While most membranes are made of polymers, Via Separations’ membranes are made with graphene oxide, which can withstand high temperatures and harsh conditions. The membrane is calibrated to the customer’s needs by altering the pore size and tuning the surface chemistry.

      Currently, Dave and her team are focusing on the pulp and paper industry as their beachhead market. They have developed a system that makes the recovery of a substance known as “black liquor” more energy efficient.

      “When tree becomes paper, only one-third of the biomass is used for the paper. Currently the most valuable use for the remaining two-thirds not needed for paper is to take it from a pretty dilute stream to a pretty concentrated stream using evaporators by boiling off the water,” says Dave.

      This black liquor is then burned. Most of the resulting energy is used to power the filtration process.

      “This closed-loop system accounts for an enormous amount of energy consumption in the U.S. We can make that process 84 percent more efficient by putting the ‘pasta strainer’ in front of the boiler,” adds Dave.

      VulcanForms: Additive manufacturing at industrial scale

      The first semester John Hart taught at MIT was a fruitful one. He taught a course on 3D printing, broadly known as additive manufacturing (AM). While it wasn’t his main research focus at the time, he found the topic fascinating. So did many of the students in the class, including Martin Feldmann MEng ’14.

      After graduating with his MEng in advanced manufacturing, Feldmann joined Hart’s research group full time. There, they bonded over their shared interest in AM. They saw an opportunity to innovate with an established metal AM technology, known as laser powder bed fusion, and came up with a concept to realize metal AM at an industrial scale.

      The pair co-founded VulcanForms in 2015.

      “We have developed a machine architecture for metal AM that can build parts with exceptional quality and productivity,” says Hart. “And, we have integrated our machines in a fully digital production system, combining AM, postprocessing, and precision machining.”

      Unlike other companies that sell 3D printers for others to produce parts, VulcanForms makes and sells parts for their customers using their fleet of industrial machines. VulcanForms has grown to nearly 400 employees. Last year, the team opened their first production factory, known as “VulcanOne,” in Devens, Massachusetts.

      The quality and precision with which VulcanForms produces parts is critical for products like medical implants, heat exchangers, and aircraft engines. Their machines can print layers of metal thinner than a human hair.

      “We’re producing components that are difficult, or in some cases impossible to manufacture otherwise,” adds Hart, who sits on the company’s board of directors.

      The technologies developed at VulcanForms may help lead to a more sustainable way to manufacture parts and products, both directly through the additive process and indirectly through more efficient, agile supply chains.

      One way that VulcanForms, and AM in general, promotes sustainability is through material savings.

      Many of the materials VulcanForms uses, such as titanium alloys, require a great deal of energy to produce. When titanium parts are 3D-printed, substantially less of the material is used than in a traditional machining process. This material efficiency is where Hart sees AM making a large impact in terms of energy savings.

      Hart also points out that AM can accelerate innovation in clean energy technologies, ranging from more efficient jet engines to future fusion reactors.

      “Companies seeking to de-risk and scale clean energy technologies require know-how and access to advanced manufacturing capability, and industrial additive manufacturing is transformative in this regard,” Hart adds.

      LiquiGlide: Reducing waste by removing friction

      There is an unlikely culprit when it comes to waste in manufacturing and consumer products: friction. Kripa Varanasi, professor of mechanical engineering, and the team at LiquiGlide are on a mission to create a frictionless future, and substantially reduce waste in the process.

      Founded in 2012 by Varanasi and alum David Smith SM ’11, LiquiGlide designs custom coatings that enable liquids to “glide” on surfaces. Every last drop of a product can be used, whether it’s being squeezed out of a tube of toothpaste or drained from a 500-liter tank at a manufacturing plant. Making containers frictionless substantially minimizes wasted product, and eliminates the need to clean a container before recycling or reusing.

      Since launching, the company has found great success in consumer products. Customer Colgate utilized LiquiGlide’s technologies in the design of the Colgate Elixir toothpaste bottle, which has been honored with several industry awards for design. In a collaboration with world- renowned designer Yves Béhar, LiquiGlide is applying their technology to beauty and personal care product packaging. Meanwhile, the U.S. Food and Drug Administration has granted them a Device Master Filing, opening up opportunities for the technology to be used in medical devices, drug delivery, and biopharmaceuticals.

      In 2016, the company developed a system to make manufacturing containers frictionless. Called CleanTanX, the technology is used to treat the surfaces of tanks, funnels, and hoppers, preventing materials from sticking to the side. The system can reduce material waste by up to 99 percent.

      “This could really change the game. It saves wasted product, reduces wastewater generated from cleaning tanks, and can help make the manufacturing process zero-waste,” says Varanasi, who serves as chair at LiquiGlide.

      LiquiGlide works by creating a coating made of a textured solid and liquid lubricant on the container surface. When applied to a container, the lubricant remains infused within the texture. Capillary forces stabilize and allow the liquid to spread on the surface, creating a continuously lubricated surface that any viscous material can slide right down. The company uses a thermodynamic algorithm to determine the combinations of safe solids and liquids depending on the product, whether it’s toothpaste or paint.

      The company has built a robotic spraying system that can treat large vats and tanks at manufacturing plants on site. In addition to saving companies millions of dollars in wasted product, LiquiGlide drastically reduces the amount of water needed to regularly clean these containers, which normally have product stuck to the sides.

      “Normally when you empty everything out of a tank, you still have residue that needs to be cleaned with a tremendous amount of water. In agrochemicals, for example, there are strict regulations about how to deal with the resulting wastewater, which is toxic. All of that can be eliminated with LiquiGlide,” says Varanasi.

      While the closure of many manufacturing facilities early in the pandemic slowed down the rollout of CleanTanX pilots at plants, things have picked up in recent months. As manufacturing ramps up both globally and domestically, Varanasi sees a growing need for LiquiGlide’s technologies, especially for liquids like semiconductor slurry.

      Companies like Gradiant, Via Separations, VulcanForms, and LiquiGlide demonstrate that an expansion in manufacturing industries does not need to come at a steep environmental cost. It is possible for manufacturing to be scaled up in a sustainable way.

      “Manufacturing has always been the backbone of what we do as mechanical engineers. At MIT in particular, there is always a drive to make manufacturing sustainable,” says Evelyn Wang, Ford Professor of Engineering and former head of the Department of Mechanical Engineering. “It’s amazing to see how startups that have an origin in our department are looking at every aspect of the manufacturing process and figuring out how to improve it for the health of our planet.”

      As legislation like the CHIPS and Science Act fuels growth in manufacturing, there will be an increased need for startups and companies that develop solutions to mitigate the environmental impact, bringing us closer to a more sustainable future. More

    • 175 Shares99 Views

      in Energy

      Evelyn Wang appointed as director of US Department of Energy’s Advanced Research Projects Agency-Energy

      by

      On Thursday, the United States Senate confirmed the appointment of Evelyn Wang, the Ford Professor of Engineering and head of the Department of Mechanical Engineering, as director of the Department of Energy’s (DOE) Advanced Research Projects Agency-Energy (ARPA-E).

      “I am deeply honored by the opportunity to serve as the director of ARPA-E. I’d like to thank President Biden, for his nomination to this important role, and Secretary Granholm, for her confidence in my abilities. I am thrilled to be joining the incredibly talented team at ARPA-E and look forward to helping bring innovative energy technologies that bolster our nation’s economy and national security to market,” says Wang. 

      An internationally recognized leader in applying nanotechnology to heat transfer, Wang has developed a number of high-efficiency, clean energy, and clean water solutions. Wang received a bachelor’s degree in mechanical engineering from MIT in 2000. After receiving her master’s degree and PhD from Stanford University, she returned to MIT as a faculty member in 2007. In 2018, she was named department head of MIT’s Department of Mechanical Engineering.

      As director of ARPA-E, Wang will advance the agency’s mission to fund and support early-stage energy research that has the potential to impact energy generation, storage, and use. The agency helps researchers commercialize innovative technologies that, according to ARPA-E, “have the potential to radically improve U.S. economic prosperity, national security, and environmental well-being.”

      “I am so grateful to the Senate for confirming Dr. Evelyn Wang to serve as Director of DOE’s Advanced Research Projects Agency-Energy,” U.S. Secretary of Energy Jennifer M. Granholm said in a statement today. “Now more than ever, we rely on ARPA-E to support early-stage energy technologies that will help us tackle climate change and strengthen American competitiveness. Dr. Wang’s experience and expertise with groundbreaking research will ensure that ARPA-E continues its role as a key engine of innovation and climate action. I am deeply grateful for Dr. Wang’s willingness to serve the American people, and we’re so excited to welcome her to DOE.” 

      Wang has served as principal investigator of MIT’s Device Research Lab. She and her team have developed a number of devices that offer solutions to the world’s many energy and water challenges. These devices include an aerogel that drastically improves window insulation, a high-efficiency solar powered desalination system, a radiative cooling device that requires no electricity, and a system that pulls potable water out of air, even in arid conditions.

      Throughout her career, Wang has been recognized with multiple awards and honors. In 2021, she was elected as a Fellow of the American Association for the Advancement of Science. She received the American Society of Mechanical Engineering (ASME) Gustus L. Memorial Award for outstanding achievement in mechanical engineering in 2017 and was named an ASME Fellow in 2015. Having mentored and advised hundreds of students at MIT, Wang was honored with a MIT Committed to Caring Award for her commitment to mentoring graduate students. She has also served as co-chair of the inaugural Rising Stars in Mechanical Engineering program to encourage women graduate students and postdocs considering future careers in academia.

      As department head, Wang has led and implemented a variety of strategic research, educational, and community initiatives in MIT’s Department of Mechanical Engineering. Alongside other departmental leaders, she led a focus on groundbreaking research advances that help address several “grand challenges” that our world faces. She worked closely with faculty and teaching staff on developing educational offerings that prepare the next generation of mechanical engineers for the workforce. She also championed new initiatives to make the department a more diverse, equitable, and inclusive community for students, faculty, and staff. 

      Wang, who is stepping down as department head effective immediately in light of her confirmation, will be taking a temporary leave as a faculty member at MIT while she serves in this role. MIT School of Engineering Dean Anantha Chandrakasan will share plans for the search for her replacement with the mechanical engineering community in the coming days.

      Once sworn in, Wang will officially assume her role as director of ARPA-E. More

    • 75 Shares149 Views

      in Security

      Food for thought, thought for food

      by

      According to the Food and Agriculture Organization of the United Nations, approximately 3.1 billion people worldwide were unable to afford a healthy diet in 2020. Meanwhile, in 2021 close to 2.3 billion people were moderately or severely food insecure. Given the strong link between malnutrition and income disparity, the numbers paint a grim picture representing one of the grand challenges of our time.

      “I’m probably an idealist,” says MIT Research Scientist Christopher Mejía Argueta, “but I really believe that if we change our diets and think about ways to help others, we can make a difference — that’s my motivation.”

      Mejía Argueta is the founder and director of the MIT Food and Retail Operations Lab (FaROL). He has more than a decade of experience in supply chain management, optimization, and effective data-driven decision-making on pressing issues like the evolution of end consumers for retail and e-tail supply chains, food waste, and equitable access to nutrition.  

      Supply chain network designs typically focus on minimizing costs without considering the implications (e.g., cost) of changes in consumer behavior. Mejía Argueta and his colleagues at the FaROL, however, are working to understand and design optimal supply chains to create high-performance operations based on consumer choice. “Understanding the significant factors of consumer choice and analyzing their evolution over time becomes critical to designing forward-looking retail operations with data-driven and customer-centric supply chains, inventory management, and distribution systems,” explains Mejía Argueta. 

      Play video

      One of his recent projects examined the challenges of small retailers worldwide. These mom-and-pop outlets, or nanostores, account for 50 percent of the global market share and are the primary source of consumer packaged goods for people in urban areas. Worldwide there are nearly 50 million nanostores, each serving between 100-200 households in a community. In India alone, there are 14 million nanostores known as kiranas. And while these retailers are more prevalent in emerging markets, they play an important role in developed markets, particularly in under-resourced communities, and are frequently located in “food deserts,” where they are the only source of essential goods for the community.  

      These small retailers thrive thanks, partly, to their ability to offer the right combination of affordability and convenience while fostering trust with local customers, who often lack access to a supermarket or a grocery store. They often exist in fragmented, densely populated areas where infrastructure and public transportation services are poor and consumers have limited purchasing power. But nanostore shopkeepers and owners are intimately familiar with their customers and their consumption patterns, which means they can connect those consumption patterns or information to the larger supply chain. According to Mejía Argueta, when it comes to the future of retail, nanostores will be the cornerstones of growth in emerging economies. 

      But it’s a complicated scenario. Mom-and-pop shops don’t have the capacity to offer a broad range of products to their customers, and often, they lack access to nutritious food options. Logistically speaking, it is expensive to supply them, and the cost-to-serve (i.e., the logistics cost) is between 10 to 30 percent more expensive than other retailers. According to Mejía Argueta, this has a significant ripple effect, impacting education, productivity, and, eventually, the economic performance of an entire nation.  

      “The high fragmentation of nanostores causes substantial distribution inefficiencies, especially in congested megacities,” he says. “At my lab, we study how to make nanostores more efficient and effective by considering various commercial and logistics strategies while considering inherent technical challenges. We need to serve these small retailers better to help them survive and thrive, to provide a greater impact for underserved communities and the entire economic ecosystem.”

      Play video

      Mejía Argueta and his team recently collaborated with Tufts University and the City of Somerville, Massachusetts, to conduct research on food access models in underserved communities. The Somerville Project explored various interventions to supply fresh produce in food desert neighborhoods.

      “A lack of nutrition does not simply mean a lack of food,” Mejía Argueta says. “It can also be caused by an overabundance of unhealthy foods in a given market, which is particularly troublesome for U.S. cities where people in underserved communities don’t have access to healthy food options. We believe that one way to combat the problem of food deserts is to supply these areas with healthy food options affordably and create awareness programs.”  

      The collaborative project saw Mejía Argueta and his colleagues assessing the impact of several intervention schemes designed to empower the end consumer. For example, they implemented a low-cost grocery delivery model similar to Instacart as well as a ride sharing system to transport people from their homes to grocery stores and back. They also collaborated with a nonprofit organization, Partnership for a Healthier America, and began working with retailers to deliver “veggie boxes” in underserved communities. Models like these provide low-income people access to food while providing dignity of choice, Mejía Argueta explains.  

      When it comes to supply chain management research, sustainability and societal impact often fall by the wayside, but Mejía Argueta’s bottom-up approach shirks tradition. “We’re trying to build a community, employing a socially driven perspective because if you work with the community, you gain their trust. If you want to make something sustainable in the long term, people need to trust in these solutions and engage with the ecosystem as a whole.”  

      And to achieve real-world impact, collaboration is key. Mejía Argueta says that government has an important role to play, developing policy to connect the models he and his colleagues develop in academia to societal challenges. Meanwhile, he believes startups and entrepreneurs can function as bridge-builders to link the flows of information, the flows of goods and cash, and even knowledge and security in an ecosystem that suffers from fragmentation and siloed thinking among stakeholders.

      Finally, Mejía Argueta reflects on the role of corporations and his belief that the MIT Industrial Liaison Program is essential to getting his research to the frontline of business challenges. “The Industrial Liaison Program does a fantastic job of connecting our research to real-world scenarios,” he says. “It creates opportunities for us to have meaningful interactions with corporates for real-world impact. I believe strongly in the MIT motto ‘mens et manus,’ and ILP helps drive our research into practice.” More