Resources

1.Leroy, M. C. et al. Assessment of PAH dissipation processes in large-scale outdoor mesocosms simulating vegetated road-side swales. Sci. Total Environ. 520, 146–153 (2015).CAS 
Article 

Google Scholar 
2.Helmreich, B., Hilliges, R., Schriewer, A. & Horn, H. Runoff pollutants of a highly trafficked urban road – correlation analysis and seasonal influences. Chemosphere 80, 991–997 (2010).CAS 
Article 

Google Scholar 
3.Wagner, S. et al. Tire wear particles in the aquatic environment – A review on generation, analysis, occurrence, fate and effects. Water Res. 139, 83–100 (2018).CAS 
Article 

Google Scholar 
4.Pramanik, B. K., Roychand, R., Monira, S., Bhuiyan, M. & Jegatheesan, V. Fate of road-dust associated microplastics and per- and polyfluorinated substances in stormwater. Process Saf. Environ. Prot. 144, 236–241 (2020).CAS 
Article 

Google Scholar 
5.Hensen, B. et al. Entry of biocides and their transformation products into groundwater via urban stormwater infiltration systems. Water Res. 144, 413–423 (2018).CAS 
Article 

Google Scholar 
6.Mrowiec, M. Road runoff management using improved infiltration ponds. Transp. Res. Procedia 14, 2659–2667 (2016).Article 

Google Scholar 
7.Goh, X., Radhakrishnan, M., Zevenbergen, C. & Pathirana, A. Effectiveness of Runoff control legislation and active, beautiful, clean (ABC) waters design features in Singapore. Water 9, 627 (2017).Article 

Google Scholar 
8.Liu, A., Liu, L., Li, D. & Guan, Y. Characterizing heavy metal build-up on urban road surfaces: Implication for stormwater reuse. Sci. Total Environ. 515–516, 20–29 (2015).Article 
CAS 

Google Scholar 
9.Chen, C., Guo, W. & Ngo, H. H. Pesticides in stormwater runoff—a mini review. Front. Environ Sci. Eng. 13, 72 (2019).Article 
CAS 

Google Scholar 
10.Leroy, M. C. et al. Performance of vegetated swales for improving road runoff quality in a moderate traffic urban area. Sci. Total Environ. 566–567, 113–121 (2016).Article 
CAS 

Google Scholar 
11.Weiss, P. T., LeFevre, G. & Gulliver, J. S. Contamination of Soil and Groundwater due to Stormwater Infiltration Practices. Saint Anthony Falls Laboratory Project Report No. 38 (Saint Anthony Falls Laboratory, 2008).12.Cederkvist, K., Jensen, M. B. & Holm, P. E. Method for assessment of stormwater treatment facilities – synthetic road runoff addition including micro-pollutants and tracer. J. Environ. Manag. 198, 107–117 (2017).CAS 
Article 

Google Scholar 
13.Tedoldi, D., Chebbo, G., Pierlot, D., Kovacs, Y. & Gromaire, M. C. Impact of runoff infiltration on contaminant accumulation and transport in the soil/filter media of Sustainable Urban Drainage Systems: a literature review. Sci. Total Environ. 569–570, 904–926 (2016).Article 
CAS 

Google Scholar 
14.Murakami, M. et al. Multiple evaluations of the removal of pollutants in road runoff by soil infiltration. Water Res. 42, 2745–2755 (2008).CAS 
Article 

Google Scholar 
15.Flanagan, K. et al. Retention and transport processes of particulate and dissolved micropollutants in stormwater biofilters treating road runoff. Sci. Total Environ. 656, 1178–1190 (2019).CAS 
Article 

Google Scholar 
16.Piguet, P., Parriaux, A. & Bensimon, M. The diffuse infiltration of road runoff: An environmental improvement. Sci. Total Environ. 397, 13–23 (2008).CAS 
Article 

Google Scholar 
17.Scholz, M. & Kazemi Yazdi, S. Treatment of road runoff by a combined storm water treatment, detention and infiltration system. Water Air Soil Pollut. 198, 55–64 (2009).CAS 
Article 

Google Scholar 
18.Huber, M. & Helmreich, B. Stormwater management: calculation of traffic area runoff loads and traffic related emissions. Water 8, 294 (2016).19.Krein, A. & Schorer, M. Road runoff pollution by polycyclic aromatic hydrocarbons and its contribution to river sediments. Water Res. 34, 4110–4115 (2000).CAS 
Article 

Google Scholar 
20.Murakami, M., Nakajima, F. & Furumai, H. Modelling of runoff behaviour of particle-bound polycyclic aromatic hydrocarbons (PAHs) from roads and roofs. Water Res. 38, 4475–4483 (2004).CAS 
Article 

Google Scholar 
21.Pinasseau, L. et al. Use of passive sampling and high resolution mass spectrometry using a suspect screening approach to characterise emerging pollutants in contaminated groundwater and runoff. Sci. Total Environ. 672, 253–263 (2019).CAS 
Article 

Google Scholar 
22.Bergé, A. et al. Non-target strategies by HRMS to evaluate fluidized micro-grain activated carbon as a tertiary treatment of wastewater. Chemosphere 213, 587–595 (2018).Article 
CAS 

Google Scholar 
23.Nguyen, T. M. H. et al. Influences of chemical properties, soil properties, and solution ph on soil-water partitioning coefficients of per- and polyfluoroalkyl substances (PFASs). Environ. Sci. Technol. 54, 15883–15892 (2020).CAS 
Article 

Google Scholar 
24.Batjes, N. H. Methodological Framework for Assessment and Mapping of the Vulnerability of Soils to Diffuse Pollution at a Continental Level (SOVEUR Project) (ISRIC—World Soil Information, 1997).25.Arrêté du 8 janvier 1998 fixant les prescriptions techniques applicables aux épandages de boues sur les sols agricoles pris en application du décret no. 97-1133 du 8 décembre 1997 relatif à l’épandage des boues issues du traitement des eaux usées. J. Off. 16, https://www.legifrance.gouv.fr/loda/id/JORFTEXT000000570287/ (1998).26.Sauvé, S., Hendershot, W. & Allen, H. E. Solid-solution partitioning of metals in contaminated soils: dependence on pH, total metal burden and organic matter. Environ. Sci. Technol. 34, 1125–1131 (2000).Article 
CAS 

Google Scholar 
27.Yadav, S. Correlation analysis in biological studies. J. Pract. Cardiovasc. Sci. 4, 116 (2018).Article 

Google Scholar 
28.Cottin, N. & Merlin, G. Removal of PAHs from laboratory columns simulating the humus upper layer of vertical flow constructed wetlands. Chemosphere 73, 711–716 (2008).CAS 
Article 

Google Scholar 
29.Ren, X. et al. Sorption, transport and biodegradation – an insight into bioavailability of persistent organic pollutants in soil. Sci. Total Environ. 610–611, 1154–1163 (2018).Article 
CAS 

Google Scholar 
30.Wiest, L. et al. Priority substances in accumulated sediments in a stormwater detention basin from an industrial area. Environ. Pollut. 243, 1669–1678 (2018).CAS 
Article 

Google Scholar 
31.Hares, R. J. & Ward, N. I. Sediment accumulation in newly constructed vegetative treatment facilities along a new major road. Sci. Total Environ. 334–335, 473–479 (2004).Article 
CAS 

Google Scholar 
32.Strömvall, A., Norin, M. & Pettersson, T. J. R. Organic contaminants in urban sediments and vertical leaching in road ditches. In The Eighth Highway and Urban Environment Symposium (eds Morrison, G. M. & Rauch, S.) 235–247 (Springer, 2007).33.Dechesne, M., Barraud, S. & Bardin, J. P. Spatial distribution of pollution in an urban stormwater infiltration basin. J. Contam. Hydrol. 72, 189–205 (2004).CAS 
Article 

Google Scholar 
34.Dierkes, C. & Geiger, W. F. Pollution retention capabilities of roadside soils. Water Sci. Technol. 39, 201–208 (1999).CAS 
Article 

Google Scholar 
35.Sauvé, S., Mcbride, M. B., Norvell, W. A. & Hendershot, W. H. Copper solubility and speciation of in situ contaminated soils: effects of copper level, pH and organic matter. Water Air Soil Pollut. 100, 133–149 (1997).Article 

Google Scholar 
36.Sauvé, S., Manna, S., Turmel, M. C., Roy, A. G. & Courchesne, F. Solid-solution partitioning of Cd, Cu, Ni, Pb, and Zn in the organic horizons of a forest soil. Environ. Sci. Technol. 37, 5191–5196 (2003).Article 
CAS 

Google Scholar 
37.El-Mufleh, A. et al. Distribution of PAHs and trace metals in urban stormwater sediments: combination of density fractionation, mineralogy and microanalysis. Environ. Sci. Pollut. Res. 21, 9764–9776 (2014).CAS 
Article 

Google Scholar 
38.Rostvall, A. et al. Removal of pharmaceuticals, perfluoroalkyl substances and other micropollutants from wastewater using lignite, Xylit, sand, granular activated carbon (GAC) and GAC+Polonite® in column tests – role of physicochemical properties. Water Res. 137, 97–106 (2018).CAS 
Article 

Google Scholar 
39.Paredes, L., Fernandez-Fontaina, E., Lema, J. M., Omil, F. & Carballa, M. Understanding the fate of organic micropollutants in sand and granular activated carbon biofiltration systems. Sci. Total Environ. 551–552, 640–648 (2016).Article 
CAS 

Google Scholar 
40.FAO, ITPS, GSBI, SCBD & EC. State of knowledge of soil biodiversity – status, challenges and potentialities. FAO https://doi.org/10.4060/cb1928en (2020).41.Tietz, A., Langergraber, G., Watzinger, A., Haberl, R. & Kirschner, A. K. T. Bacterial carbon utilization in vertical subsurface flow constructed wetlands. Water Res. 42, 1622–1634 (2008).CAS 
Article 

Google Scholar 
42.Weil, R. R. & Brady, N. C. The Nature and Properties of Soils 15th edn (Pearson Education, 2016).43.Usman, K., Al-Ghouti, M. A. & Abu-Dieyeh, M. H. The assessment of cadmium, chromium, copper, and nickel tolerance and bioaccumulation by shrub plant Tetraena qataranse. Sci. Rep. 9, 1–11 (2019).
Google Scholar 
44.Nuel, M., Laurent, J., Bois, P., Heintz, D. & Wanko, A. Seasonal and ageing effect on the behaviour of 86 drugs in a full-scale surface treatment wetland: removal efficiencies and distribution in plants and sediments. Sci. Total Environ. 615, 1099–1109 (2018).CAS 
Article 

Google Scholar 
45.FAO. World Reference Base For Soil Resources 2014. International Soil Classification System For Naming Soils And Creating Legends For Soil Maps. World Soil Resources Report No. 106 (2014).46.Villette, C. et al. In situ localization of micropollutants and associated stress response in Populus nigra leaves. Environ. Int. 126, 523–532 (2019).CAS 
Article 

Google Scholar 
47.Schymanski, E. L. et al. Identifying small molecules via high resolution mass spectrometry: communicating confidence. Environ. Sci. Technol. 48, 2097–2098 (2014).CAS 
Article 

Google Scholar 
48.Boleda, M. R., Galceran, M. T. & Ventura, F. Validation and uncertainty estimation of a multiresidue method for pharmaceuticals in surface and treated waters by liquid chromatography-tandem mass spectrometry. J. Chromatogr. A 1286, 146–158 (2013).CAS 
Article 

Google Scholar 
49.Barupal, D. K. & Fiehn, O. Chemical similarity enrichment analysis (ChemRICH) as alternative to biochemical pathway mapping for metabolomic datasets. Sci. Rep. 7, 1–11 (2017).CAS 
Article 

Google Scholar  More

1.Muir, D. C. G. & Howard, P. H. Are there other persistent organic pollutants? A challenge for environmental chemists. Environ. Sci. Technol. 40, 7157–7166 (2006).CAS 
Article 

Google Scholar 
2.Wang, Z., Walker, G. W., Muir, D. C. G. & Nagatani-Yoshida, K. Toward a global understanding of chemical pollution: a first comprehensive analysis of national and regional chemical inventories. Environ. Sci. Technol. 54, 2575–2584 (2020).CAS 
Article 

Google Scholar 
3.Schwarzenbach, R. P. et al. The challenge of micropollutants in aquatic systems. Science 313, 1072–1077 (2006).CAS 
Article 

Google Scholar 
4.National Academy of Sciences Science and Decisions: Advancing Risk Assessment (National Academies, 2009); https://doi.org/10.17226/122095.Paustenbach, D. J., Panko, J. M., Scott, P. K. & Unice, K. M. A methodology for estimating human exposure to perfluorooctanoic acid (PFOA): a retrospective exposure assessment of a community (1951-2003). J. Toxicol. Environ. Health Pt A 70, 28–57 (2007).CAS 
Article 

Google Scholar 
6.Sunderland, E. M. et al. A review of the pathways of human exposure to poly- and perfluoroalkyl substances (PFASs) and present understanding of health effects. J. Expo. Sci. Environ. Epidemiol. 29, 131–147 (2019).CAS 
Article 

Google Scholar 
7.Hopkins, Z. R., Sun, M., DeWitt, J. C. & Knappe, D. R. U. Recently detected drinking water contaminants: GenX and other per- and polyfluoroalkyl ether acids. J. Am. Water Works Assoc. 110, 13–28 (2018).CAS 
Article 

Google Scholar 
8.Jarema, K. A., Hunter, D. L., Shaffer, R. M., Behl, M. & Padilla, S. Acute and developmental behavioral effects of flame retardants and related chemicals in zebrafish. Neurotoxicol. Teratol. 52, 194–209 (2015).CAS 
Article 

Google Scholar 
9.Weis, C. P. The value of alternatives assessment. Environ. Health Perspect. 124, A40 (2016).Article 

Google Scholar 
10.Jacobs, M. M., Malloy, T. F., Tickner, J. A. & Edwards, S. Alternatives assessment frameworks: research needs for the informed substitution of hazardous chemicals. Environ. Health Perspect. 124, 265–280 (2016).Article 

Google Scholar 
11.Sarigiannis, D. A. & Hansen, U. Considering the cumulative risk of mixtures of chemicals – a challenge for policy makers. Environ. Health 11(Suppl 1), S18 (2012).Article 

Google Scholar 
12.Von Gunten, U. Oxidation processes in water treatment: are we on track? Environ. Sci. Technol. 52, 5062–5075 (2018).CAS 
Article 

Google Scholar 
13.Krasner, S. W. et al. Occurrence of a new generation of disinfection byproducts. Environ. Sci. Technol. 40, 7175–7185 (2006).CAS 
Article 

Google Scholar 
14.Richardson, S. D. & Plewa, M. J. To regulate or not to regulate? What to do with more toxic disinfection by-products? J. Environ. Chem. Eng. 8, 103939 (2020).CAS 
Article 

Google Scholar 
15.Altenburger, R. et al. Mixture effects in samples of multiple contaminants—an inter-laboratory study with manifold bioassays. Environ. Int. 114, 95–106 (2018).CAS 
Article 

Google Scholar 
16.Legler, J. et al. A novel in vivo bioassay for (xeno-)estrogens using transgenic zebrafish. Environ. Sci. Technol. 34, 4439–4444 (2000).CAS 
Article 

Google Scholar 
17.Nelson, J., Bishay, F., van Roodselaar, A., Ikonomou, M. & Law, F. C. P. The use of in vitro bioassays to quantify endocrine disrupting chemicals in municipal wastewater treatment plant effluents. Sci. Total Environ. 374, 80–90 (2007).CAS 
Article 

Google Scholar 
18.Stalter, D., Magdeburg, A. & Oehlmann, J. Comparative toxicity assessment of ozone and activated carbon treated sewage effluents using an in vivo test battery. Water Res. 44, 2610–2620 (2010).CAS 
Article 

Google Scholar 
19.Cao, N. et al. Evaluation of wastewater reclamation technologies based on in vitro and in vivo bioassays. Sci. Total Environ. 407, 1588–1597 (2009).CAS 
Article 

Google Scholar 
20.Neale, P. A. et al. Application of in vitro bioassays for water quality monitoring in three drinking water treatment plants using different treatment processes including biological treatment, nanofiltration and ozonation coupled with disinfection. Environ. Sci. Water Res. Technol. 6, 2444–2453 (2020).CAS 
Article 

Google Scholar 
21.Escher, B. I. et al. Benchmarking organic micropollutants in wastewater, recycled water and drinking water with in vitro bioassays. Environ. Sci. Technol. 48, 1940–1956 (2014).CAS 
Article 

Google Scholar 
22.Conley, J. M. et al. Comparison of in vitro estrogenic activity and estrogen concentrations in source and treated waters from 25 U.S. drinking water treatment plants. Sci. Total Environ. 579, 1610–1617 (2017).CAS 
Article 

Google Scholar 
23.Medlock Kakaley, E. et al. In vitro effects-based method and water quality screening model for use in pre- and post-distribution treated waters. Sci. Total Environ. 768, 144750 (2021).CAS 
Article 

Google Scholar 
24.Neale, P. A. & Escher, B. I. In vitro bioassays to assess drinking water quality. Curr. Opin. Environ. Sci. Health 7, 1–7 (2019).Article 

Google Scholar 
25.Alygizakis, N. A. et al. Exploring the potential of a global emerging contaminant early warning network through the use of retrospective suspect screening with high-resolution mass spectrometry. Environ. Sci. Technol. 52, 5135–5144 (2018).CAS 
Article 

Google Scholar 
26.Escher, B. I., Stapleton, H. M. & Schymanski, E. L. Tracking complex mixtures in our changing environment. Science 367, 388–392 (2020).CAS 
Article 

Google Scholar 
27.Peter, K. T., Wu, C., Tian, Z. & Kolodziej, E. P. Application of nontarget high resolution mass spectrometry data to quantitative source apportionment. Environ. Sci. Technol. 53, 12257–12268 (2019).CAS 
Article 

Google Scholar 
28.Schymanski, E. L. et al. Non-target screening with high-resolution mass spectrometry: critical review using a collaborative trial on water analysis. Anal. Bioanal. Chem. 407, 6237–6255 (2015).CAS 
Article 

Google Scholar 
29.Williams, A. J. et al. The CompTox chemistry dashboard: a community data resource for environmental chemistry. J. Cheminform. 9, 61 (2017).Article 
CAS 

Google Scholar 
30.CompTox Chemicals Dashboard (US EPA, 2017); https://www.epa.gov/chemical-research/comptox-chemicals-dashboard31.Dong, H., Cuthbertson, A. A. & Richardson, S. D. Effect-directed analysis (eda): a promising tool for nontarget identification of unknown disinfection byproducts in drinking water. Environ. Sci. Technol. 54, 1290–1292 (2020).CAS 
Article 

Google Scholar 
32.Vughs, D., Baken, K. A., Kolkman, A., Martijn, A. J. & de Voogt, P. Application of effect-directed analysis to identify mutagenic nitrogenous disinfection by-products of advanced oxidation drinking water treatment. Environ. Sci. Pollut. Res. 25, 3951–3964 (2018).CAS 
Article 

Google Scholar 
33.Altenburger, R. et al. Future water quality monitoring—adapting tools to deal with mixtures of pollutants in water resource management. Sci. Total Environ. 512–513, 540–551 (2015).Article 
CAS 

Google Scholar 
34.Zwart, N. et al. High-throughput effect-directed analysis using downscaled in vitro reporter gene assays to identify endocrine disruptors in surface water. Environ. Sci. Technol. 52, 4367–4377 (2018).CAS 
Article 

Google Scholar 
35.Brunner, A. M. et al. Integration of target analyses, non-target screening and effect-based monitoring to assess OMP related water quality changes in drinking water treatment. Sci. Total Environ. 705, 135779 (2020).CAS 
Article 

Google Scholar 
36.Raies, A. B. & Bajic, V. B. In silico toxicology: computational methods for the prediction of chemical toxicity. WIREs Comput. Mol. Sci. 6, 147–172 (2016).CAS 
Article 

Google Scholar 
37.New Approach Methods Work Plan (US EPA, 2020).38.Bliss, C. I. The toxicity of poisons applied jointly. Ann. Appl. Biol. 26, 585–615 (1939).CAS 
Article 

Google Scholar 
39.Altenburger, R., Nendza, M. & Schüürmann, G. Mixture toxicity and its modeling by quantitative structure-activity relationships. Environ. Toxicol. Chem. 22, 1900–1915 (2003).CAS 
Article 

Google Scholar 
40.Rider, C. V. & Ellen, J. (eds) Chemical Mixtures and Combined Chemical and Nonchemical Stressors (Springer, 2018); https://doi.org/10.1007/978-3-319-56234-641.Rabinowitz, J. R., Goldsmith, M. R., Little, S. B. & Pasquinelli, M. A. Computational molecular modeling for evaluating the toxicity of environmental chemicals: prioritizing bioassay requirements. Environ. Health Perspect. 116, 573–576 (2008).CAS 
Article 

Google Scholar 
42.Kwiatkowski, C. F. et al. Scientific basis for managing PFAS as a chemical class. Environ. Sci. Technol. Lett. 7, 532–543 (2020).CAS 
Article 

Google Scholar 
43.Rosario-Ortiz, F. et al. How do you like your tap water? Science 351, 912–914 (2006).Article 

Google Scholar 
44.Kar, S. & Leszczynski, J. Exploration of computational approaches to predict the toxicity of chemical mixtures. Toxics 7, 15 (2019).CAS 
Article 

Google Scholar 
45.Crittenden, J. C. et al. Predicting GAC performance with rapid small-scale column tests. J. Am. Water Works Assoc. 83, 77–87 (1991).CAS 
Article 

Google Scholar 
46.Topol, E. J. Individualized medicine from prewomb to tomb. Cell 157, 241–253 (2014).CAS 
Article 

Google Scholar 
47.Ternes, T. A. et al. Integrated evaluation concept to assess the efficacy of advanced wastewater treatment processes for the elimination of micropollutants and pathogens. Environ. Sci. Technol. 51, 308–319 (2017).CAS 
Article 

Google Scholar 
48.Leusch, F. D. L. et al. Assessment of wastewater and recycled water quality: a comparison of lines of evidence from in vitro, in vivo and chemical analyses. Water Res. 50, 420–431 (2014).CAS 
Article 

Google Scholar 
49.Drewes, J. E., Hemming, J., Ladenburger, S. J., Schauer, J. & Sonzogni, W. An assessment of endocrine disrupting activity changes during wastewater treatment through the use of bioassays and chemical measurements. Water Environ. Res. 77, 12–23 (2005).CAS 
Article 

Google Scholar 
50.Dingemans, M. M. L., Baken, K. A., van der Oost, R., Schriks, M. & van Wezel, A. P. Risk-based approach in the revised European Union drinking water legislation: opportunities for bioanalytical tools. Integr. Environ. Assess. Manag. 15, 126–134 (2019).Article 

Google Scholar 
51.Escher, B. I. & Neale, P. A. Effect-based trigger values for mixtures of chemicals in surface water detected with in vitro bioassays. Environ. Toxicol. Chem. 40, 487–499 (2021).CAS 
Article 

Google Scholar 
52.Reemtsma, T. et al. Mind the gap: persistent and mobile organic compounds—water contaminants that slip through. Environ. Sci. Technol. 50, 10308–10315 (2016).CAS 
Article 

Google Scholar 
53.Brack, W. Effect-directed analysis: a promising tool for the identification of organic toxicants in complex mixtures? Anal. Bioanal. Chem. 377, 397–407 (2003).CAS 
Article 

Google Scholar 
54.Campos, B. & Colbourne, J. K. How omics technologies can enhance chemical safety regulation: perspectives from academia, government, and industry. Environ. Toxicol. Chem. 37, 1252–1259 (2018).CAS 
Article 

Google Scholar 
55.Zhen, H. et al. Assessing the impact of wastewater treatment plant effluent on downstream drinking water-source quality using a zebrafish (Danio Rerio) liver cell-based metabolomics approach. Water Res. 145, 198–209 (2018).CAS 
Article 

Google Scholar 
56.Xia, P. et al. Benchmarking water quality from wastewater to drinking waters using reduced transcriptome of human cells. Environ. Sci. Technol. 51, 9318–9326 (2017).CAS 
Article 

Google Scholar 
57.Prasse, C. Reactivity-directed analysis-a novel approach for the identification of toxic organic electrophiles in drinking water. Environ. Sci. Process. Impacts 23, 48–65 (2021).CAS 
Article 

Google Scholar 
58.Dodd, B. AB-1755 The Open and Transparent Water Data Act: Assembly Bill No. 1755 (California Legislative Information, 2016); https://leginfo.legislature.ca.gov/faces/billNavClient.xhtml?bill_id=201520160AB175559.Mons, B., Schultes, E., Liu, F. & Jacobsen, A. The FAIR principles: first generation implementation choices and challenges. Data Intell. 2, 1–9 (2020).Article 

Google Scholar 
60.National Research Council Toward Precision Medicine: Building a Knowledge Network for Biomedical Research and a New Taxonomy of Disease (National Academies, 2011).61.Drinking Water and Public Health in the United States (American Public Health Association, 2019).62.Allman, A., Daoutiis, P., Arnol, W. A. & Cussler, E. L. Efficient water pollution abatement. Ind. Eng. Chem. Res. https://doi.org/10.1021/acs.iecr.9b03241 (2019).63.A Working Approach for Identifying Potential Candidate Chemicals for Prioritization (US EPA, 2018).64.Janesick, A. S. et al. On the utility of ToxCastTM and ToxPi as methods for identifying new obesogens. Environ. Health Perspect. https://doi.org/10.1289/ehp.1510352 (2016).65.Janesick, A. S., Dimastrogiovanni, G., Chamorro-Garcia, R. & Blumberg, B. Reply to “comment on ‘On the utility of ToxCastTM and ToxPi as methods for identifying new obesogens’”. Environ. Health Perspect. https://doi.org/10.1289/EHP1122 (2017).66.Houck, K. A. et al. Comment on “On the utility of ToxCastTM and ToxPi as methods for identifying new obesogens”. Environ. Health Perspect. https://doi.org/10.1289/EHP881 (2017).67.Molnar, C. et al. Pitfalls to avoid when interpreting machine learning models. Preprint at https://arxiv.org/abs/2007.04131 (2020). More

CAREER COLUMN
25 August 2021

Webcast: how to green your lab

Taking steps to lower the environmental impact of your research can reduce costs.

Jack Leeming

0

Jack Leeming

Jack Leeming is a careers editor at Nature.

View author publications

You can also search for this author in PubMed
 Google Scholar

Share on Twitter
Share on Twitter

Share on Facebook
Share on Facebook

Share via E-Mail
Share via E-Mail

In this 60-minute webinar, three speakers share their experiences and advice on how to reduce waste and emissions from the laboratory. They then answer questions from Nature’s readers.Namrata Jain speaks about espousing the merits of a green lab during her PhD programme. Jain, who now works as a marketing consultant at My Green Lab, a non-profit organization in San Diego, California, also suggests training programmes for researchers in which they can learn more about lab emissions. “There is a vast potential to improve the way science is done today and to incorporate sustainability into our lab practice,” she says.Kathryn Ann-Ramirez Aguilar champions a more efficient use of space, reducing waste and saving costs as part of her role as a manager in the Green Labs programme at the University of Colorado Boulder. “The only item in the lab that was asking us to save resources was a sticker on the light switch,” she says of her inspiration to combat lab waste. “I thought to myself that we must be able to do more than just turn off the lights when we leave.”Cintia Milagre, an organic chemist at São Paulo State University in Brazil, who also runs a green-lab programme, describes her experiences managing labs with reduced costs and carbon footprints. She says working in lower-resource areas often requires researchers to think more about the environmental impact of their work.The session was held on 5 August 2021. The three participants also suggested more resources to support green-lab initiatives and took part in a live Q&A discussion about how researchers at all career stages can make efforts to reduce wastage — often saving money for their labs in the process.It forms part of Nature Careers’ ongoing 2021 webinar programme. For information about future topics, please visit https://www.nature.com/webcasts/.

doi: https://doi.org/10.1038/d41586-021-02352-6

Related Articles

Quiz: How green is your lab?

How going green can raise cash for your lab

What can you do to make your lab greener?

Subjects

Climate change

Chemistry

Water resources

Latest on:

Climate change

Can artificially altered clouds save the Great Barrier Reef?
News Feature 25 AUG 21

Control methane to slow global warming — fast
Editorial 25 AUG 21

Five principles for climate-resilient cities
Correspondence 24 AUG 21

Chemistry

African tropical montane forests store more carbon than was thought
News & Views 25 AUG 21

Direct observation of ultrafast hydrogen bond strengthening in liquid water
Article 25 AUG 21

Could Europe become the first climate-neutral continent?
Correspondence 24 AUG 21

Water resources

A staggering store of water is revealed in Earth’s crust
Research Highlight 17 AUG 21

Iran: drought must top new government’s agenda
Correspondence 10 AUG 21

Iran is draining its aquifers dry
Research Highlight 16 JUN 21

Jobs

Head of a New Laboratory (indefinite-term employment position), RIKEN BDR

RIKEN
Kobe, Japan

PhD Student (gn)

University Hospital of Muenster (UKM), WWU
Münster, Germany

Research Associate (PhD student) (gn)

University Hospital of Muenster (UKM), WWU
Münster, Germany

Research Assistant (PhD Student) (gn)

University Hospital of Muenster (UKM), WWU
Münster, Germany

Nature Briefing
An essential round-up of science news, opinion and analysis, delivered to your inbox every weekday.

Email address

Yes! Sign me up to receive the daily Nature Briefing email. I agree my information will be processed in accordance with the Nature and Springer Nature Limited Privacy Policy.

Sign up More

People gather at a pump in India to collect groundwater. Accessible, fresh water makes up only a fraction of the water in Earth’s crust. Credit: Jack Laurenson/Lnp/Shutterstock

Water resources
17 August 2021
A staggering store of water is revealed in Earth’s crust

Modelling work shows that crustal groundwater accounts for more water than the world’s ice caps and glaciers.

Share on Twitter
Share on Twitter

Share on Facebook
Share on Facebook

Share via E-Mail
Share via E-Mail

The depths of Earth’s crust hold a huge volume of ancient, salty water that has been undetected until now.Grant Ferguson at the University of Saskatchewan in Saskatoon, Canada, and his colleagues calculated how much of this underground water should exist. They analysed a global database of the types of rock that make up the uppermost 10 kilometres of the planet’s continental crust. Nearly 88% is hard crystalline rock, and 12% is sedimentary rock, which has large spaces between its grains.The scientists calculated how much water could exist between the grains of both of these rock types, and estimated that the uppermost 10 kilometres of Earth’s crust holds nearly 44 million cubic kilometres of water. That’s more than the amount frozen in glaciers and the ice sheets of Greenland and Antarctica.Most of this vast reservoir lies at a depth of between 1 kilometre and 10 kilometres, beyond the reach of wells that could tap it. The groundwater used by many farmers for irrigation and by billions of people for drinking is at much shallower depths.

Geophys. Res. Lett. (2021)

Water resources More

The environmental stresses of existing US–China crop tradeIn the past, producing the volumes of crops demanded by China exacerbated US environmental pressures, but potentially relieved the environmental stresses on China and the world. In 2014–2016, on average, to produce the crops exported to China, the United States devoted an additional 12 Mha of harvested area, demanded 4 trillion litres (1 trillion = 1 × 1012) more blue water, and increased nitrogen and phosphorus surplus by 0.5 TgN (1 Tg = 1 × 109 kg) and 0.007 TgP (Fig. 2). In contrast, if China’s crop imports from the United States were produced in China domestically with its current technology and management practices, assuming adequate resources and suitable climates and soil conditions, it would require nearly 20 Mha harvested area and 9 trillion litres of blue water, and would lead to nitrogen and phosphorus surpluses of 1.7 TgN and 0.3 TgP. Such drastic shifts in the associated environmental stressors would consequently produce a net increased global burden of environmental stresses, including net additional exploitation of 8 Mha of harvested area and 5 trillion litres of blue water, and further losses of 1.2 TgN and 0.3 TgP to the environment.Fig. 2: Environmental stresses affecting crop substitution.a–d, Environmental stresses of producing the average 2014–2016 crop portfolio China imported from the United States at each region’s current RUE levels, given adequate resources and suitable climate and soil conditions: required harvested area (ha) (a), induced nitrogen surplus (kg) (b), phosphorus surplus (kg) (c) and blue water demand (litres) (d). Each coloured bar indicates the environmental stress of each crop type. Only the US bars show the environmental stressors that actually happened. Other regions’ bars are the potential environmental stressors that would have happened if those regions had grown the same crops to meet China’s demands. For example, in the nitrogen surplus graph (b), the US bar shows that the United States generated a 0.5 TgN surplus when producing the crops exported to China. China’s bar in panel b denotes that China would have generated a 1.8 TgN surplus if its entire imported crop portfolio from the United States had been produced domestically. Similarly, if those crops had been grown in Brazil, the potential burdens are shown by the bars for Brazil. SoAmer, South America (apart from Brazil).Source dataFull size imageIf China’s crop imports from the United States were entirely substituted by imports from other regions of the world, the environmental stressors of the production would vary among regions due to the different production efficiencies and available resources (Fig. 2). For example, to produce the same volume of crops demanded by China, Brazil would require an additional 2 Mha of harvested area and would induce an additional 0.5 TgN surplus and 0.22 TgP surplus, compared with the United States, but would substantially reduce blue water demands. Other South American countries would be a less-polluting alternative to the United States given the region’s more efficient nitrogen use and blue water demand, but higher costs and limited resource availability may impede them from replacing the crop supply from the United States entirely17. Overall, this comparison suggests that the current production reallocations from China to the United States achieved through international trade have relieved environmental burdens for China and the world due to China’s relatively low efficiencies in both water use and fertilizer use compared with the United States and the rest of the world. Admittedly, this comparison with Brazil and other South American countries demonstrates an extreme case of production reallocations from the United States to the rest of the world, and such reallocation is likely to be buffered by market-mediated responses and considerations of biophysical limits; however, it demonstrates the general direction of changes in environmental consequences in the context of weakening US–China crop trade.The national impacts of the weakening trade relationshipShifts in crop production portfoliosUnder the proposed December 2019 tariff scenario (Table 1), China’s retaliatory tariffs would potentially increase the prices of US agricultural products in China’s domestic market. This would lower China’s demands for US agricultural products, eventually lowering US farmers’ income and discouraging them from producing relevant crops3,4,5. Given the fact that over 70% of China’s crop imports from the United States are soybeans, domestic soybean prices in the United States are affected, depressing their production in the United States by about 3 Mha. Crops that are less traded with China would be less affected by China’s tariff increase. Hence, over the long term, US farmers would switch to these less-traded crops with China, such as other coarse grains (primarily corn), wheat and other agricultural products. Besides soybeans, non-soybean oilseeds are also among the major crops that China imports from the United States. Under the defined scenario, non-soybean oilseeds are also retaliated, and their production thus contracts in the United States by 0.6 Mha. As a result, the total harvested area in the United States would decline by 1.25 Mha.Table 1 China’s retaliatory tariff percentage increases for US agriculture as of May and December 2019Full size tableRelatively lower-priced soybeans from Brazil and other South American countries, due to the absence of tariffs, would incentivize China’s soybean imports from these countries. China’s rising demands would increase the income of soybean farmers and motivate soybean expansion in Brazil and other South American countries by 3 and 0.8 Mha, respectively, adding pressures to their cropland expansion19,20,21. China’s retaliation on US soybeans would spur China’s domestic oilseed production in general by 0.5 Mha. However, with intensified agricultural production and limited harvested area expansion capabilities, China would experience limited changes in its crop portfolio and harvested area. As soybean is the major protein source for livestock animals29, tariffs on meat could further disincentivize US soybean production. Since South America mainly competes with the United States in China’s domestic soybean market, the production of all non-soybean crops in South America would experience limited incentives.Changes in environmental stressesShifts in crop portfolios are accompanied by changes in environmental stressors such as nitrogen surplus, phosphorus surplus and blue water demand. Although the total harvested area in the United States would contract by 1.25 Mha, its total nitrogen surplus (expressed as kgN) would increase by 35 million kgN as soybean, a nitrogen-fixing crop with relatively high nitrogen-use efficiency (NUE) and low nitrogen surplus intensity (expressed as kgN ha−1), shifts to other crops (Fig. 3). The reduction of 105 million kgN surplus due to soybean contraction in the United States is less than the additional nitrogen surplus generated by the expansion of other crops, such as other coarse grains, with higher nitrogen surplus intensity. In contrast, Brazil and other South American countries would reduce their nitrogen surplus by 119 million kgN and 81.5 million kgN owing to substitutions of soybean for other non-soybean crops. Globally, the nitrogen surplus increase in the United States is offset by the nitrogen surplus decline in Brazil as a result of the soybean shifts from the United States to Brazil to meet demands of China. Overall, global nitrogen surplus would significantly decline by 154 million kgN due to the contractions of nitrogen-inefficient crops (for example, other coarse grains, wheat, sugar crops and other agricultural products) in South America, and their increase in the United States, where they can be grown more efficiently and with lower nitrogen surplus intensity.Fig. 3: Changes in environmental stresses.a–d, Changes in environmental stresses by region and crop type: harvested area (ha) (a), total nitrogen surplus (kg) (b), total phosphorus surplus (kg) (c) and total blue water demand (litres) (d). In each bar, total changes are denoted by black dots, which are further decomposed into contributions from changes in each crop type represented by coloured blocks. The leftmost bar summarizes total global changes and the contributions from each crop type.Source dataFull size imageThe contraction of the harvested area in the United States would not lead to any reduction in blue water demand. If soybean alone is subject to China’s retaliation, the US blue water demand would increase substantially by 1.6 billion litres (Supplementary Information, section 9 and Supplementary Fig. 7). In this case, the crops that are projected to increase production in the United States either replace soybean production with higher water demand per harvested area (for example, corn in the ‘other coarse grains’ category) or tend to expand in the regions with high blue water demand (for example, ‘other oilseeds’). However, when non-soybean oilseeds are also retaliated, the increase in US water demands would be only 0.1 billion litres, much lower than that of the soybean-only tariff scenario, as these water-demanding crops also decline in production. Although it is unlikely that farmers will invest significantly for irrigation equipment given a short-term policy or market shock5,30, it is possible for farmers to increase irrigation water use on land already equipped with irrigation infrastructure, to shift crop type (for example, from soybean–corn rotation to continuous corn) and perhaps even to invest in new equipment as the trade tension becomes a norm in the context of growing tensions between the United States and China. Therefore, the reduction of blue water demand for soybean in the United States could be outweighed by the increase in water demand for other crops (Fig. 3d). Under both scenarios, similar patterns are observed on the global scale: global blue water demand would increase because the benefits of blue water savings from shifts in soybeans production (that is, shifts from the United States to Brazil and other South American countries) would be offset by the increasing blue water demand in non-soybean oilseed expansion in water-scarce regions.Trade-offs and synergies also exist within each region across different environmental stressors. The expansion of soybean, a nitrogen-fixing plant that is relatively more efficient than many other crops, would reduce Brazilian nitrogen surplus by 120 million kgN but increase its phosphorus surplus by 23.5 million kgP. Brazilian soybean is intensively produced in areas with highly weathered, naturally acidic soils that render much of the native and applied phosphorus unavailable to the crop. Brazilian soybean production thus requires higher phosphorus fertilizer and lime inputs than soybeans produced in most temperate regions31. With similar PUE levels, the phosphorus surplus increase due to soybean expansion is higher than the phosphorus surplus decline driven by the contraction of other crops—resulting in a net 23.5 million kgP surplus increase in Brazil. Although most of this phosphorus surplus is currently retained in Brazilian soils, the accumulated phosphorus could eventually reach saturation and pollute water bodies32. In addition, the increased demand for phosphorus fertilizer and lime in Brazil may exceed domestic supplies of rock phosphorus reserves and lime. In contrast to Brazil, the United States would suffer from an increase in both phosphorus and nitrogen surplus by 34.7 million kgP and 10.3 million kgN, respectively, as the production shifts from soybean to more fertilizer-intensive crop types, while other South American countries would experience alleviation in both phosphorus and nitrogen surplus by 81.5 million kgP and 5 million kgN, respectively, due to the shifts opposite to those in the United States. Global phosphorus surplus would be further aggravated by 30 million kgP as soybeans are expanded in Brazil where phosphorus use is more inefficient.Overall, the weakening US–China agricultural trade relationship would worsen the US environmental stressors of both nutrient surpluses and water resource depletion. Such patterns of environmental consequences are primarily driven by China’s retaliation on US soybeans. Additional environmental stresses imposed on the United States could also be affected by the extent of China’s retaliation on non-soybean oilseeds (Supplementary Fig. 7). Brazil would reduce its nitrogen surplus and blue water demand through crop mix changes but face an aggravated phosphorus surplus issue. China would experience limited environmental improvements. Globally, trade-offs exist among nitrogen surplus reduction, increases in phosphorus surplus, increases in blue water demand and increased harvested area.Sensitivity analysesWhile the environmental stressor evaluation in this study adopts standard Global Trade Analysis Project (GTAP) parameters and uses crop-specific environmental stressor intensity databases from reliable sources13,33,34, uncertainties in these parameters and data could affect the outcomes of the evaluation. To test the robustness of the evaluation outcomes, we designed the following sensitivity analyses focusing on these two major sources of uncertainties.Regarding the uncertainties associated with the GTAP-BIO model, we first identified parameters to which the production portfolios are most sensitive, varied these parameters by 50% following an independent triangular distribution and obtained the consequent crop portfolio variations35. We then evaluated the resulting variations in global and regional environmental stressors by assuming that crop-specific environmental stressor intensity in each region remained unchanged (see Supplementary Information, section 7 for the rationale for the selection of parameters and the 50% variation). We found that even with 50% variations, parameter uncertainties did not alter the direction of changes in environmental stressors. The environmental consequences in the United States and Brazil are most sensitive to soybean’s trade elasticity and cropland transformation, while China is mostly affected by its protein preferences for animal feed (Supplementary Table 9).Concerning the uncertainties in crop-specific environmental stressor intensity, we varied each major crop’s intensity of nitrogen surplus, phosphorus surplus and blue water demand following independent triangular distribution. We then assessed the corresponding variations in global and regional environmental stressors by assuming constant average harvested area changes (changes reported in Fig. 3a). We found that the coefficient of variation for each environmental stressor is linearly related to the intensity variation level (Supplementary Table 10). Regional nitrogen surplus changes are more sensitive to the accuracy of the nitrogen surplus intensity estimate for soybean and other coarse grains, and the United States is most sensitive to its estimate of blue water demand intensity for soybeans, other coarse grains and sugar crops (Supplementary Table 10). Hence, potential variations in the data could also moderately weaken or amplify the conclusions made in this analysis but would not change the direction of patterns.Local hotspots with additional environmental stressesHeterogeneous distributions of crops and varying crop mixes and RUEs in crop production at subnational scales cause divergence of the local environmental stress changes from the aggregate national changes (Fig. 4). Unique crop portfolios in each grid cell could lead to spatial trade-offs and synergies within each environmental stressor and across different environmental stressors. To investigate the heterogeneous consequences on a subnational scale, we downscaled the modelling results from GTAP for each AEZ to 30 × 30 arcminute grids, following the approach that has been applied in multiple studies34,36,37. The downscaled results represent one of the plausible changes in crop distribution and subsequent changes in intensities of nitrogen surplus, phosphorus surplus and blue water demand on a subnational scale under the trade tension and based on the model structure and assumptions.Fig. 4: Changes in nitrogen surplus, phosphorus surplus and blue water demand intensity across different regions in China, the contiguous United States and South America.a–c, Changes in environmental stressors due to China’s potential trade policy on US agricultural products: gridded nitrogen surplus (kgN ha−1) (a), phosphorus surplus (kgP ha−1) (b) and blue water demand (l ha−1) (c). d, Combining the three environmental stressors shows the hotspots of increased environmental degradation. The transparency of each grid cell denotes the logarithmic form of the total harvested area in ha where high transparency corresponds to high quantities of harvested area, and low transparency corresponds to low quantities of harvested area. For example, the Brazilian Amazon has low harvested area and thus is less transparent.Source dataFull size imageChina’s retaliation on US agriculture would lead to the contraction of soybean production mainly in the US soybean/corn belt where the production of other coarse grains expands—resulting in a reduction in total nitrogen surplus (Supplementary Fig. 6b) but an increase in nitrogen surplus intensity for this region (Fig. 4a). The expansion of other coarse grains is much less than the reduction in soybean production, leading to the decline of harvested area for the region. However, because other coarse grain has a higher nitrogen surplus intensity than soybean, the intensity of nitrogen loss increases on the remaining cropland (Fig. 4a). The expansion of wheat would focus on the northern and western regions of the midwestern United States, accompanied by increasing phosphorus surplus intensity. Such phosphorus surplus intensity increase is aggravated by further expansion of wheat production. With the increasing tariffs imposed on all crops, the northwestern United States would experience a reduction in nitrogen surplus reduction as other coarse grains produced in the midwest substitute those produced in this region. Meanwhile, the contraction of nitrogen-efficient non-soybean oilseeds in southern regions would aggravate local nitrogen surplus intensity but relieve local demands for blue water. However, if the non-soybean oilseeds are not retaliated, soybean reduction could potentially incentivize their production in southern regions, reducing local nitrogen surplus intensity (Fig. 4a) but demanding more blue water (Fig. 4c).In contrast to the contraction in the United States, soybean would expand in South America mainly in the central-west and southern regions of Brazil and the northeastern regions of Argentina. While adding pressures on land use changes in these areas, the expansion of soybean production may relieve nitrogen surplus intensity and blue water demand intensity by replacing wheat, other coarse grains, sugar crops and other agricultural products. Consistent with national-scale analysis, the Brazilian soybean production area may experience aggravated phosphorus surplus intensity but other South American countries would benefit from lower phosphorus surplus intensity due to their different soil types (Fig. 4b).Considering all three environmental stressors together, China’s retaliatory tariffs would lead to the worsening of one or more environmental stresses in most regions (Fig. 4d). The region with reduced environmental stresses is mainly concentrated in southeast and northeast China, where soybeans and rapeseeds expand at the cost of other resource-intensive crops, and Argentina, where soybean production is incentivized. The rest of China is dominated by intensified blue water demand, while some regions would face increased nitrogen surplus (green areas in Fig. 4d for China) and phosphorus surplus intensity as well (purple areas in Fig. 4d for China). It is notable that 8.3% of the regions in China where crop production is incentivized would face challenges from aggregations of all three environmental stressors (brown areas in Fig. 4d for China). Most regions in the midwestern, southern and northeastern United States are dominated by increases in nitrogen surplus and blue water demand intensity (green areas in Fig. 4d for United States), as part of soybean production shifts to other crops with more intensive nitrogen surplus and/or blue water demand. Northern parts of the western United States show modest intensifying nutrient surpluses, and southern areas of the western United States have slight intensification in nitrogen surplus but intensified blue water demand if non-soybean oilseeds would not be retaliated (Supplementary Fig. 8). The Brazilian Amazon region faces the situation of intensified nutrient losses and blue water demands of existing agricultural practices as a result of a reduction in resource use efficient crops in crop mixes. Since total harvested area devoted to crop production in the Brazilian Amazon is relatively low (less transparent brown areas in Fig. 4d for Brazil), changes in the environmental stressors analysed here may be less of a concern, although any cropland expansion in the Amazon region would probably be important regarding other conservation issues. The rest of Brazil, where the crop production is more active, is dominated by intensified phosphorus fertilizer use and phosphorus losses in soybean-intensive areas. More

This section describes how we used freely-available data to compile Classic driver input files for the VIC model. First, we created parameter files for VIC-5 Classic, then we converted them to NetCDF format for VIC-5 Image. VIC-5 Classic requires three parameter files: a soil parameter file, a vegetation parameter file, and a vegetation library file. An optional elevation band file can be provided to resolve sub-grid variability in elevation, which is important in regions with complex topography. The parameters are arranged as a relational database: each grid cell has a unique identifier, called a grid cell number, in the soil parameter file, that VIC uses to find the corresponding rows of data in the vegetation parameter and elevation band files. The Image driver uses a different setup, with all parameters stored in a single NetCDF file.Soil parametersThe soil parameter file for VIC-5 Classic is an ASCII text file that includes soil parameters such as hydraulic conductivity and porosity, but also other kinds of static parameters, such as average precipitation and time zone offset from GMT. Each row of the soil parameter file represents one grid cell, and each column represents a different variable. We compiled the soil parameter file using MERIT20 elevation data, soil texture data from the FAO HWSD, pedotransfer tables relating soil texture to other soil properties, and interpolated weather station data (WorldClim21). Any remaining parameters were set to suggested values from the VIC model’s documentation2. The following sections describe the estimation of each variable in the soil parameter file, summarized in Table 1.Table 1 VIC model parameters for the soil parameter file.Full size tableElevation and land maskThe VICGlobal soil parameter file uses the Multi-Error-Removed Improved-Terrain (MERIT20) digital elevation model (DEM) to define the elevations, latitudes, and longitudes of each land grid cell. The MERIT DEM is an error-corrected and extended version of the SRTM DEM, with 3 arc-second resolution and coverage from 60°S to 85°N and 180°W to 180°E. Specifically, MERIT is a combination of the SRTM, AW3D, and Viewfinder Panoramas’ DEMs, corrected for striping, speckle, absolute bias, and tree height bias. We used bilinear interpolation to aggregate MERIT to 1/16° resolution and derive a 1/16° MERIT-based land mask and DEM (Figure S1).Soil texture dataSoil texture (percent sand, silt, and clay) and bulk density were obtained from the FAO HWSD, a gridded soil parameter dataset derived from in-situ measurements of the soil column. We used a 0.05° resolution NetCDF dataset converted from the original HWSD Microsoft Access database by Wieder et al.22. We resampled the HWSD soil data from 0.05° to 1/16° resolution using bilinear interpolation with the MATLAB® function griddedInterpolant. While HWSD has near global coverage, there are missing data in some places around the world, notably Greenland and northern Africa. We filled in these missing data using inpainting, a gap-filling method from the field of image processing. We used the MATLAB® function inpaintnans23, which uses a partial differential equation method to fill in missing data, to fill gaps in the HWSD data over the MERIT land mask. Figure 1 shows the HWSD bulk density data before and after inpainting.Fig. 1Bulk density data from the Harmonized World Soils Database (HWSD). The top panel shows HWSD bulk density data resampled to 1/16° resolution, the middle panel shows bulk density after infilling holes, and the bottom panel shows the difference.Full size imageThe HWSD data are divided into “topsoil” and “subsoil” parameters. The first 30 cm of the soil column are considered topsoil and the lower 70 cm subsoil. VIC is typically run with three soil layers, so we created a three-layer soil parameter file by breaking up the 30 cm HWSD topsoil layer into two soil layers: one of 10 cm and one of 20 cm, so the final soil parameter file has three layers, with thicknesses of 10 cm, 20 cm and 70 cm, from top to bottom of the soil column. Ten centimeters has been a common choice for the uppermost layer soil depth in VIC modeling applications since its use by Liang et al.24. Soil layer depths are typically used as calibration parameters. VICGlobal values should be considered a starting estimate.Calculating soil parameter values based on soil texturesPedotransfer functions (e.g. Cosby et al.25) relate readily available soil properties, such as soil texture, to less easily-observed properties, such as hydraulic conductivity. After resampling the HWSD data from 1/4° to 1/16° resolution, we estimated soil parameters by classifying each grid cell’s USDA soil texture class and assigning physical soil properties based on a lookup table included with the VIC documentation2,26. The lookup table (Table 2) relates the 12 USDA soil texture classes to bulk density, field capacity, wilting point, porosity, saturated hydraulic conductivity, and slope of the soil water retention curve in Campbell’s equation. We classified soil textures using the USDA soil texture triangle, as implemented by the MATLAB® function soil_classification27. Figure 2 shows the derived USDA soil texture map. We used these along with the lookup table to estimate saturated hydraulic conductivity (Ksat), the exponent in Campbell’s equation for hydraulic conductivity (expt), fractional soil moisture at the critical point (wcrfract), where the critical point is about 70% of field capacity, fractional soil moisture at the wilting point (wpwpfract), quartz content, and porosity for each soil layer. The lookup table26 did not include quartz content, so we supplemented it with the soil texture-quartz content lookup table from Peters-Lidard et al.28.Table 2 USDA soil texture class lookup table.Full size tableFig. 2USDA soil texture classifications based on HWSD. Topsoil is soil from 0–30 cm below the surface, and subsoil is soil between 30–100 cm deep.Full size imageWe set the variable infiltration capacity parameter ({b}_{infilt}=0.2), the maximum baseflow fraction threshold ({d}_{s}=0.001), and maximum soil moisture threshold ({w}_{s}=0.9), their suggested values from the VIC documentation. These parameters, along with maximum baseflow velocity (dsmax) and soil depth, are typically calibrated. We set the baseflow curve exponent c = 2, the soil thermal damping depth dp = 4 m, soil density = 2685 kg/m3, surface roughness = 0.001 m, and snow roughness = 0.0005 m, also based on guidance from the VIC documentation. The soil moisture diffusion parameter phis is not used in the current version of VIC, so we set it to the no-data value (−999). The final few soil parameters — dsmax, initial soil moisture (initm), and bubbling pressure (bubble)— were calculated using the following equations, based on guidance from the VIC documentation.$$dsmax=slopeast {bar{K}}_{sat}$$
(1)
$$initm=wc{r}_{fract}ast porosityast {t}_{l}$$
(2)
$$bubble=0.32ast expt+4.3$$
(3)
Equation (1) estimates dsmax for each grid cell as the product of soil-column average Ksat and land surface slope, which was calculated from the elevation data using the MATLAB® function gradientm29g. Equation (2), where tl is the thickness of soil layer l, assumes that initial soil moisture is equal to the fractional soil moisture content at the critical point. Equation (3) calculates bubbling pressure as a function of expt, based on linear regression of bubbling pressure vs. expt30. Figures S2–S9 in the Supplementary Information show maps of each soil parameter. We assumed residual soil moisture, the amount of soil moisture that cannot be removed from the soil by drainage or evapotranspiration, was zero.Elevation bandsVIC uses an elevation band file (also called a snow band file) to account for subgrid heterogeneity in grid cell elevations. The assumption of uniform elevation over an entire grid cell can lead to modeling errors in mountainous regions, where higher topography is associated with cooler temperatures and higher precipitation rates. The elevation band file accounts for subgrid variability in topography by dividing each grid cell into a number of elevation bands, each of which is simulated separately. VIC adjusts temperature, pressure, and precipitation depending on the elevation in each band. We prepared an elevation band file with five elevation bands by comparing the 1/16° DEM used for the soil parameter file with a 30 arc-second DEM. Both DEMs were derived by aggregating MERIT data. For simplicity, we assumed precipitation was evenly distributed among elevation bands within a grid cell. The elevation band file is provided with the caveat that using elevation bands requires more computing power; users may wish to turn elevation bands on or off (via the VIC global parameter file) depending on their needs.Vegetation parametersVIC-5 Classic uses a vegetation parameter file to define the fractional cover of different vegetation types within each grid cell and some of their physical properties. Other vegetation parameters are stored in the “vegetation library” file. (VIC-5 Image simply stores all parameters in a single “parameter” file.) The VIC-5 Classic vegetation parameter file consists of information about fractional cover of each land cover type in each grid cell, and their corresponding root zone depths and root fractions within each root zone. The vegetation parameter file can optionally include time-varying LAI, fractional canopy cover, and albedo data, but it is simpler to specify these in the vegetation library (at the cost of not representing some spatial heterogeneity).We used MODIS land cover data from the 0.05° MODIS MCD12C1 Collection 6 data product31 to assign fractional land cover values to each grid cell by calculating the average land cover for MCD12C1 observations over the 2017 calendar year. We chose 2017 because it was the most recent year with data in all the MODIS-based datasets used for this study, and there is very low interannual variability of land cover32 in MCD12C1 Collection 6. Figure 3 shows majority land cover types from the 2017 MCD12C1 observations.Fig. 3MODIS MCD12C1 majority land cover types (IGBP classifications). .Full size imageLike all global land cover data products, MCD12C1 makes classification errors. Sulla-Menashe et al.32 reported 67% overall IGBP classification accuracy for 2001 land cover. Classification errors are more common in the “mixed” land covers, such as cropland/natural vegetation mosaic, shrublands, grasslands, and savannas. Fortunately for our purposes, the vegetation parameters for commonly-confused land covers tend to be fairly similar themselves, which reduces the impact of misclassification on land surface modelling results. For example, the LAI of open shrubland is not too different from the LAI of closed shrubland.We calculated root fraction as a function of land cover class following the method of Zeng33, who defined the following formula (Eq. 4) for use in parameterizing land surface models:$$Y=1-frac{1}{2}left({e}^{-ad}+{e}^{-bd}right)$$
(4)
where Y = cumulative root fraction, d = depth, and a and b are empirical parameters defined by Zeng33 for each International Geosphere–Biosphere Programme (IGBP) land cover type, based on a rooting depth database compiled from more than 200 field surveys. We used this formula with depths of 0.1 m, 0.7 m, and dr, corresponding to three root zones. The value of dr, the maximum rooting depth for each IGBP land cover type, was taken from Zeng33. This method assumes that the depth and distribution of roots depends only on the land cover type; we assume that land cover type is the primary control on root characteristics. Table 3 shows root fractions and root zone depths for each IGBP land cover type.Table 3 Root zone depths (m) and fraction of roots in each zone for IGBP land cover classes.Full size tableLike previous large-scale VIC vegetation cover datasets, our vegetation parameter file neglects land cover change over time. However, it does have a few other advantages over past vegetation parameter datasets. The land cover classification used in the N2001 and L2013 VIC parameter sets is referred to as “UMD-NLDAS” because it is a modified version of the AVHRR-based University of Maryland (UMD) land cover product34. The UMD-NLDAS classification was modified for the North American Land Data Assimilation project (NLDAS35) to exclude open water, urban, and snow and ice land cover classes (see BV2019). VICGlobal uses 17 IGBP land cover classes, including urban, barren, perennial snow and ice, and inland water bodies, permitting better description of land cover variability than the 11 UMD-NLDAS classification.Vegetation library fileThe vegetation library maps each land cover type to a set of vegetation parameters (Table 4). We adapted the LDAS vegetation library36 for use with the 17 IGBP land cover classes, taking monthly average LAI, fractional canopy cover (fcanopy), and albedo values obtained from recent MODIS data products. We set architectural resistance (r0) and minimum stomatal resistance (rmin) to values from literature (described below). The rest of the parameters, which are described in the N2001 paper, were left to their original LDAS vegetation library values. This section describes how we estimated LAI, fcanopy, albedo, r0, and rmin, and how we transferred the remaining parameters from the 11 UMD-NLDAS land cover classes to the 17 IGBP land cover classes.Table 4 VIC model parameters for the vegetation library file.Full size tableWe used MODIS observations from the year 2017 to calculate monthly average LAI, fcanopy, and albedo for each IGBP land cover type. We calculated LAI and albedo from the MODIS-based Global LAnd Surface Satellite dataset (GLASS37,38,39) and fcanopy from NDVI observations (MCD13C140) The expression used for fcanopy follows BV2019:$$fcanopy={left(frac{NDVI-NDV{I}_{min}}{NDV{I}_{max}-NDV{I}_{min}}right)}^{2}$$
(5)
where NDVImin and NDVImax are the minimum and maximum values of NDVI observed for that month. Monthly LAI, fcanopy, and albedo values were calculated by averaging over all grid cells of the same land cover type, counting only cells that were at least 90% homogenous, to avoid noise from grid cells with multiple land covers. Excepting perennial snow and ice land cover, the vegetation parameters in the VIC vegetation library should describe snow-free vegetation. Therefore, before calculating LAI, fcanopy, and albedo for each land cover class, we used fractional snow cover data from MOD10CM41, a global 0.05 degree monthly snow cover dataset, to exclude grid cells with more than 90% snow cover. Additionally, we set albedo to 0.05 for open water, and we set LAI and fcanopy to 0 for open water and perennial snow and ice.The resistances rmin and r0 play a role in determining how much plant transpiration occurs. Higher resistance means less transpiration. Stomatal resistance is resistance to the release of water through the plant stomata, and architectural resistance is the aerodynamic resistance between the leaves and the canopy top42. Two sets of resistance parameters have been used in past large-scale VIC implementations. N2001 ran VIC over the entire globe using rmin values adapted from Dorman and Sellers’ global database of rmin values43 computed using the Simple Biosphere Model44 (SiB). The Nijssen et al.45 r0 values were taken from Ducoudre et al.’s SECHIBA land surface parameterization42. The other set of rmin and r0 parameters are those used in the LDAS vegetation library and in studies such as Livneh et al.12. This set of rmin values comes from Mao et al.46 and Mao and Cherkauer47. We used the rmin values from SiB44 and the r0 values from SECHIBA42 for VICGlobal as they appeared to be the better documented values.For the other parameters in the vegetation library file (displacement height, roughness length, etc.), we assigned values using the existing LDAS vegetation library. Since there are 17 IGBP land cover classes, and only 11 UMD-NLDAS land cover classes in the LDAS vegetation library, we re-assigned some IGBP land cover classes to take the parameters of UMD-NLDAS land cover classes. We remapped barren land, permanent wetlands, snow and ice, urban land, and water bodies to take the parameters of “grasslands” from the LDAS vegetation parameter file. While the characteristics of the barren, snow and ice, urban, and water land cover types clearly differ from those of grasslands, their low LAI and fcanopy values, corresponding to sparse vegetation, essentially “turns off” the other vegetation parameters in the VIC model, as pointed out by BV2019. The other remappings were more straightforward. Croplands and croplands/natural vegetation mosaics inherited values from “croplands,” savannas became “wooded grasslands,” and woody savannas became “woodlands.” We were thus able to assign vegetation parameter values to the each of the 17 IGBP land cover classes.To calculate global average time series of seasonally-varying vegetation parameters would be of limited interest as the seasonal cycle would average out across the equator. Therefore, we calculated average monthly fcanopy, LAI, and albedo for each vegetation type in each hemisphere, and we developed two separate vegetation library files: one for the northern hemisphere and one for the southern hemisphere. Maps of January and July LAI, fcanopy, and albedo are shown in Fig. 4. For illustrative purposes, the parameter values in this figure have been averaged over the 17 IGBP land cover classes using area-based weighting. Figures S14–S19 show maps of the remaining vegetation parameters. Figures S20–S22 show the cycle of LAI, fractional canopy cover, and albedo for each vegetation type, averaged separately over each hemisphere.Fig. 4Maps of leaf-area index, albedo, and fractional canopy cover values. Parameter values have been averaged over the 17 IGBP land cover classes using area-based weighting.Full size image More

Description of scenarios used in this studyTo assess future urban water scarcity, we used the scenario framework from the Scenario Model Intercomparison Project (ScenarioMIP), part of the International Coupled Model Intercomparison Project Phase 6 (CMIP6)38. The scenarios have been developed to better link the Shared Socioeconomic Pathways (SSPs) and Representative Concentration Pathways (RCPs) to support comprehensive research in different fields to better understand global climatic and socioeconomic interactions38,39. We selected the four ScenarioMIP Tier 1 scenarios (i.e., SSP1&RCP2.6, SSP2&RCP4.5, SSP3&RCP7.0, and SSP5&RCP8.5) to evaluate future urban water scarcity. SSP1&RCP2.6 represents the sustainable development pathway of low radiative forcing level, low climate change mitigation challenges, and low social vulnerability. SSP2&RCP4.5 represents the business-as-usual pathway of moderate radiative forcing and social vulnerability. SSP3&RCP7.0 represents a higher level of radiative forcing and high social vulnerability. SSP5&RCP8.5 represents a rapid development pathway and very high radiative forcing38.Estimation of urban water scarcityTo estimate urban water scarcity, we quantified the total urban population living in water-scarce areas2,3,7,19. Specifically, we first corrected the spatial distribution of the global urban population, then identified water-scarce areas around the world, and finally quantified the urban population in water-scarce areas at different scales (Supplementary Fig. 1).Correcting the spatial distribution of global urban populationThe existing global urban population data from the History Database of the Global Environment (HYDE) provided consistent information on historical and future population, but it has a coarse spatial resolution of 10 km (Supplementary Table 1)40,41. In addition, it was estimated using total population, urbanization levels, and urban population density, and does not align well with the actual distribution of urban land42. Hence, we allocated the HYDE global urban population data to high-resolution urban land data. We first obtained global urban land in 2016 from He et al.42. Since the scenarios used in existing urban land forecasts are now dated43,44, we simulated the spatial distribution of global urban land in 2050 under each SSP at a grid-cell resolution of 1km2 using the zoned Land Use Scenario Dynamics-urban (LUSD-urban) model45,46,47 (Supplementary Methods 1). The simulated urban expansion area in this study was significantly correlated with that in existing datasets (Supplementary Table 6). We then converted the global urban land raster layers for 2016 and 2050 into vector format to characterize the spatial extent of each city. The total population within each city was then summed and the remaining HYDE urban population cells located outside urban areas were allocated to the nearest city. Assuming that the population density within an urban area was homogeneous, we calculated the total population per square kilometer for all urban areas and converted this back to raster format at a spatial resolution of 1 km2. The new urban population data had much lower error than the original HYDE data (Supplementary Table 7).Identification of global water-scarce areasAnnual and monthly WSI values were calculated at the catchment level in 2014 and 2050 as the ratio of water withdrawals (TWW) to availability (AWR)33. Due to limited data availability, we combined water-scarce areas in 2014 and the urban population in 2016 to estimate current urban water scarcity. WSI for catchment i for time t as:$${{{{{mathrm{WS{I}}}}}}}_{t,i}=frac{{{{{mathrm{TW{W}}}}}}_{t,i}}{{{{{mathrm{AW{R}}}}}}_{t,i}}$$
(1)
For each catchment defined by Masutomi et al.48, the total water withdrawal (TWWt,i) equalled the sum of water withdrawals (WWt,n,i) for each sector n (irrigation, livestock, industrial, or domestic), while the water availability equalled the sum of available water resources for catchment i (Rt,i), inflows/outflows of water resources due to interbasin water transfer ((varDelta {{{{mathrm{W{R}}}}}}_{t,i})), and water resources from each upstream catchment j (WRt,i,j):$${{{{{mathrm{TW{W}}}}}}}_{t,i}={{sum }_{n}{{{{mathrm{WW}}}}}}_{t,n,i}$$
(2)
$${{{{{mathrm{AW{R}}}}}}}_{t,i}={R}_{t,i}+varDelta {{{{mathrm{W{R}}}}}}_{t,i}+mathop{sum}limits_{j}{{{{mathrm{W{R}}}}}}_{t,i,j}$$
(3)
The changes of water resources due to interbasin water transfer were calculated based on City Water Map produced by McDonald et al.3. The number of water resources from upstream catchment j was calculated based on its water availability (AWRt,i,j) and water consumption for each sector n (WCt,n,i,j)49:$${{{{{mathrm{W{R}}}}}}}_{t,i,j}=,max (0,{{{{mathrm{AW{R}}}}}}_{t,i,j}-{{sum }_{n}{{{{mathrm{WC}}}}}}_{t,n,i,j})$$
(4)
For areas without upstream catchments, the number of available water resources was equal to the runoff. Following Mekonnen and Hoekstra36, and Hofste et al.33, we did not consider environmental flow requirements in calculating water availability.Annual and monthly WSI for 2014 were calculated directly based on water withdrawal, water consumption, and runoff data from AQUEDUCT3.0 (Supplementary Table 1). The data from AQUEDUCT3.0 were selected because they are publicly available and the PCRaster Global Water Balance (PCRGLOBWB 2) model used in the AQUADUCT 3.0 can better represent groundwater flow and available water resources in comparison with other global hydrologic models (e.g., the Water Global Assessment and Prognosis (WaterGAP) model)33. The annual and monthly WSI for 2050 were calculated by combining the global water withdrawal data from 2000 to 2050 provided by the National Institute of Environmental Research of Japan (NIER)34 and global runoff data from 2005 to 2050 from CMIP6 (Supplementary Table 1). Water withdrawal ({{{{{mathrm{W{W}}}}}}}_{s,m,n,i}^{2050}) in 2050 for each sector n (irrigation, industrial, or domestic), catchment i, and month m under scenario s was calculated based on water withdrawal in 2014 (({{{{{mathrm{W{W}}}}}}}_{m,n,i}^{2014})):$${{{{{mathrm{W{W}}}}}}}_{s,m,n,i}^{2050}={{{{mathrm{W{W}}}}}}_{m,n,i}^{2014}cdot [1+{{{{mathrm{WW{R}}}}}}_{s,m,n,i}cdot (2050-2014)]$$
(5)
adjusted by the mean annual change in water withdrawal from 2000 to 2050 (WWRs, m, n, i), calculated using the global water withdrawal for 2000 (({{{{{mathrm{W{W}}}}}}}_{{{{{mathrm{NIER}}}}},m,n,i}^{2000})) and 2050 (({{{{{mathrm{W{W}}}}}}}_{{{{{mathrm{NIER}}}}},s,m,n,i}^{2050})) provided by the NIER34:$${{{{{mathrm{WW{R}}}}}}}_{s,m,n,i}=frac{({{{{mathrm{W{W}}}}}}_{{{{{mathrm{NIER}}}}},s,m,n,i}^{2050}/{{{{mathrm{W{W}}}}}}_{{{{{mathrm{NIER}}}}},m,n,i}^{2000})-1}{2050-2000}$$
(6)
Based on the assumption of a constant ratio of water consumption to water withdrawal in each catchment, water consumption in 2050 (({{{{{mathrm{W{C}}}}}}}_{s,m,n,i}^{2050})) was calculated as:$${{{{{mathrm{W{C}}}}}}}_{s,m,n,i}^{2050}={{{{mathrm{W{W}}}}}}_{s,m,n,i}^{2050}cdot frac{{{{{mathrm{W{C}}}}}}_{m,n,i}^{2014}}{{{{{mathrm{W{W}}}}}}_{m,n,i}^{2014}}$$
(7)
where ({{{{{mathrm{W{C}}}}}}}_{m,n,i}^{2014}) denotes water consumption in 2014. Due to a lack of data, we specified that water withdrawal for livestock remained constant between 2014 and 2050, and used water withdrawal simulation under SSP3&RCP6.0 provided by the National Institute of Environmental Research in Japan to approximate SSP3&RCP7.0.To estimate water availability, we calculated available water resources (({R}_{s,m,i}^{2041-2050})) for each catchment i and month m under scenario s for the period of 2041–2050 as:$${R}_{s,m,i}^{2041-2050}={R}_{m,i}^{{{{{mathrm{ols}}}}},2005-2014}cdot frac{{bar{R}}_{s,m,i}^{2041-2050}}{{bar{R}}_{m,i}^{2005-2014}}$$
(8)
based on the amount of available water resources with 10-year ordinary least square regression from 2005 to 2014 (({R}_{m,i}^{{{{{mathrm{ols}}}}},,2005-2014})) from AQUEDUCT3.0 (Supplementary Table 1). ({overline{R}}_{m,i}^{2005-2014}) and ({overline{R}}_{s,m,i}^{2041-2050}) denote the multi-year average of runoff (i.e., surface and subsurface) from 2005 to 2014, and from 2041 to 2050, respectively, calculated using the average values of simulation results from 10 global climate models (GCMs) (Supplementary Table 2).We then identified water-scarce catchments based on the WSI. Two thresholds of 0.4 and 1.0 have been used to identify water-scarce areas from WSI (Supplementary Table 4). While the 0.4 threshold indicates high water stress49, the threshold of 1.0 has a clearer physical meaning, i.e., that water demand is equal to the available water supply and environmental flow requirements are not met36,37. We adopted the value of 1.0 as a threshold representing extreme water stress to identify water-scarce areas. The catchments with annual WSI >1.0 were identified as perennial water-scarce catchments; the catchments with annual WSI equal to or 1.0 were identified as seasonal water-scarce catchments.Estimation of global urban water scarcityBased on the corrected global urban population data and the identified water-scarce areas, we evaluated urban water scarcity at the global and national scales via a spatial overlay analysis. The urban population exposed to water scarcity in a region (e.g., the whole world or a single country) is equal to the sum of the urban population in perennial water-scarce areas and that in seasonal water-scarce areas. Limited by data availability, we used water-scarce areas in 2014 and the urban population in 2016 to estimate current urban water scarcity. Projected water-scarce areas and urban population in 2050 under four scenarios were then used to estimate future urban water scarcity. In addition, we obtained the location information of large cities (with population >1 million in 2016) from the United Nations’ World Urbanization Prospects1 (Supplementary Table 1) and identified those in perennial and seasonal water-scarce areas.Uncertainty analysisTo evaluate the uncertainty across the 10 GCMs used in this study (Supplementary Table 2), we identified water-scarce areas and estimated urban water scarcity using the simulated runoff from each GCM under four scenarios. To perform the uncertainty analysis, the runoff in 2050 for each GCM was calculated using the following equation:$${R}_{s,g,m,i}^{2050}={R}_{m,i}^{2014}cdot frac{{R}_{s,g,m,i}^{2041-2050}}{{R}_{g,m,i}^{2005-2014}}$$
(9)
where ({R}_{s,g,m,i}^{2050}) denotes the runoff of catchment i in month m in 2050 for GCM g under scenario s. ({R}_{g,m,i}^{2005-2014}) and ({R}_{s,g,m,i}^{2041-2050}) denote the multi-year average runoff from 2005 to 2014, and from 2041 to 2050, respectively, calculated using the simulation results from GCM g. Using the runoff for each GCM, the WSI in 2050 for each catchment was recalculated, water-scarce areas were identified, and the urban population exposed to water scarcity was estimated.Contribution analysisBased on the approach used by McDonald et al.2 and Munia et al.50, we quantified the contribution of socioeconomic factors (i.e., water demand and urban population) and climatic factors (i.e., water availability) to the changes in global urban water scarcity from 2016 to 2050. To assess the contribution of socioeconomic factors (({{{{{mathrm{Co{n}}}}}}}_{s,{{{{mathrm{SE}}}}}})), we calculated global urban water scarcity in 2050 while varying demand and population and holding catchment runoff constant (({{{{{mathrm{UW{S}}}}}}}_{s,{{{{mathrm{SE}}}}}}^{2050})). Conversely, to assess the contribution of climate change ((Co{n}_{s,CC})), we calculated scarcity while varying runoff and holding urban population and water demand constant (({{{{{mathrm{UW{S}}}}}}}_{s,{{{{mathrm{CC}}}}}}^{2050})). Socioeconomic and climatic contributions were then calculated as:$${{{{{mathrm{Co{n}}}}}}}_{s,SE}=frac{{{{{mathrm{UW{S}}}}}}_{s,{{{{mathrm{SE}}}}}}^{2050}-{{{{mathrm{UW{S}}}}}}^{2016}}{{{{{mathrm{UW{S}}}}}}_{s}^{2050}-{{{{mathrm{UW{S}}}}}}^{2016}}times 100 %$$
(10)
$${{{{{mathrm{Co{n}}}}}}}_{s,CC}=frac{{{{{mathrm{UW{S}}}}}}_{s,{{{{mathrm{CC}}}}}}^{2050}-{{{{mathrm{UW{S}}}}}}^{2016}}{{{{{mathrm{UW{S}}}}}}_{s}^{2050}-{{{{mathrm{UW{S}}}}}}^{2016}}times 100 %$$
(11)
Feasibility analysis of potential solutions to urban water scarcityPotential solutions to urban water scarcity involve two aspects: increasing water availability and reducing water demand2. Approaches to increasing water availability include groundwater exploitation, seawater desalination, reservoir construction, and inter-basin water transfer; while approaches to reduce water demand include water-use efficiency measures (e.g., new cultivars for improving agricultural water productivity, sprinkler or drip irrigation for improving water-use efficiency, water-recycling facilities for improving domestic and industrial water-use intensity), limiting population growth, and virtual water trade2,3,18,32. To find the best ways to address urban water scarcity, we assessed the feasibility of these potential solutions for each large city (Supplementary Fig. 2).First, we divided these solutions into seven groups according to scenario settings and the scale of implementation of each solution (Supplementary Fig. 2). Among the solutions assessed, water-use efficiency improvement, limiting population growth, and climate change mitigation were included in the simulation of water demand and water availability under the ScenarioMIP SSPs&RCPs simulations34. Here, we considered the measures within SSP1&RCP2.6 which included the lowest growth in population, irrigated area, crop intensity, and greenhouse gas emissions; and the largest improvements in irrigation, industrial, and municipal water-use efficiency34.We then evaluated the feasibility of the seven groups of solutions according to the characteristics of water-scarce cities (Supplementary Fig. 2). Of the 526 large cities (with population >1 million in 2016 according to the United Nations’ World Urbanization Prospects), we identified those facing perennial or seasonal water scarcity under at least one scenario by 2050. We then selected the cities that no longer faced water scarcity under SSP1&RCP2.6 where the internal scenario assumptions around water-use efficiency, population growth, and climate change were sufficient to mitigate water scarcity. Following McDonald et al.2,3 and Wada et al.18, we assumed that desalination can be a potential solution for coastal cities (distance from coastline More

1.Blake, N. M. Water for the Cities: A History of the Urban Water Supply Problem in the United States Vol. 3 (Syracuse University Press, 1956).2.Aziz, H. A. & Amr, S. S. A. (eds). Advanced Oxidation Processes (AOPs) in Water and Wastewater Treatment (IGI Global, 2019).3.Tynan, N. Nineteenth century London water supply: processes of innovation and improvement. Rev. Austrian Econ. 26, 73–91 (2013).Article 

Google Scholar 
4.Huisman, L. & Wood, W. E. Slow Sand Filtration 1–89 (WHO, 1974).5.Crittenden, J. C., Trussell, R. R., Hand, D. W., Howe, K. J. & Tchobanoglous, G. MWH’s Water Treatment: Principles and Design (John Wiley & Sons, 2012).6.Crittenden, J. C., Trussell, R. R., Hand, D. W., Howe, K. J. & Tchobanoglous, G. Water Treatment: Principles and Design (John Wiley & Sons, 2005).7.National Primary Drinking Water Regulations https://www.epa.gov/ground-water-and-drinking-water/national-primary-drinking-water-regulations (2020).8.EPA. Secondary Drinking Water Standards: Guidance for Nuisance Chemicals https://www.epa.gov/sdwa/secondary-drinking-water-standards-guidance-nuisance-chemicals (2020).9.Javidi, A. & Pierce, G. US households’ perception of drinking water as unsafe and its consequences: examining alternative choices to the tap. Water Resour. Res. 54, 6100–6113 (2018).Article 

Google Scholar 
10.Pierce, G. & Gonzalez, S. Mistrust at the tap? Factors contributing to public drinking water (mis) perception across US households. Water Policy 19, 1–12 (2017).Article 

Google Scholar 
11.Eric M.V. Hoek, David Jassby, Richard B. Kaner, Jishan Wu, Jingbo Wang, Yiming Liu, Unnati Rao. Unnati Rao Sustainable Desalination and Water Reuse (Morgan & Claypool, 2021).12.Oren, Y. Capacitive deionization (CDI) for desalination and water treatment—past, present and future (a review). Desalination 228, 10–29 (2008).CAS 
Article 

Google Scholar 
13.Hunker. Definition of Smart Appliances https://www.hunker.com/13409415/definition-of-smart-appliances (2020).14.Webopedia. Smart Home https://www.webopedia.com/TERM/S/smart-home.html (2020).15.EPA. Drinking Water Regulations and Contaminants https://www.epa.gov/sdwa/drinking-water-regulations-and-contaminants (2020).16.EPA. Basic Information on the CCL and Regulatory Determination https://www.epa.gov/ccl/basic-information-ccl-and-regulatory-determination#how-ccl1ccl2-developed (2020).17.EPA. Regulatory Determination 4 https://www.epa.gov/ccl/regulatory-determination-4 (2020).18.EPA. Perchlorate in Drinking Water https://www.epa.gov/sdwa/perchlorate-drinking-water (2020).19.Hoek, E. M. V. Reverse Osmosis Membrane Biofouling: Causes, Consequences and Countermeasures http://www.aquamem.com/publications/WPI_RO-Biofouling_WhitePaper_v1_4-24-17.pdf (2017).20.EPA. How EPA Regulates Drinking Water Contaminants www.epa.gov/sdwa/how-epa-regulates-drinking-water-contaminants (2020).21.Toupin, L. U.S. Federal vs. State Environmental Regulations: What to Follow https://enablon.com/blog/u-s-federal-vs-state-environmental-regulations-what-to-follow/ (2020).22.US EPA. Enhancing Effective Partnerships Between the EPA and the States in Civil Enforcement and Compliance Assurance Work https://www.epa.gov/sites/production/files/2019-07/documents/memoenhancingeffectivepartnerships.pdf (2019).23.California Legislative Information. CHAPTER 6.6. Safe Drinking Water and Toxic Enforcement Act of 1986. (2020).24.OEHHA. Proposition 65 Law and Regulations https://oehha.ca.gov/proposition-65/law/proposition-65-law-and-regulations (2020).25.How Drinking Water Standards are Created in California https://www.cleanwateraction.org/features/how-drinking-water-standards-are-created-california (2020).26.Boards, C. W. Maximum contaminant levels and regulatory dates for drinking water: U.S. EPA vs California. 6–9 https://www.waterboards.ca.gov/drinking_water/certlic/drinkingwater/documents/ccr/mcls_epa_vs_dwp.pdf (US EPA, 2018).27.Duffour, C. et al. Texas Administrative Code. Summary of Maximum Contaminant Levels, Maximum Residual Disinfectant Levels, Treatment Techniques, and Action Levels. https://www.tceq.texas.gov/assets/public/legal/rules/rules/pdflib/290f.pdf (2017).28.Scott, R. & Jones, J. L. State of Alaska. Department of environmental conservation, 18 AAC 70, Water Quality Standards. https://dec.alaska.gov/media/1046/18-aac-70.pdf.29.Guidance Values and Standards for Contaminants in Drinking Water https://www.health.state.mn.us/communities/environment/risk/guidance/gw/index.html (2020).30.EPA. Analyze Trends: Drinking Water Dashboard https://echo.epa.gov/trends/comparative-maps-dashboards/drinking-water-dashboard (2020).31.EPA. Safe Drinking Water Act (SDWA) Resources and FAQs https://echo.epa.gov/help/sdwa-faqs (2020).32.EPA. Drinking Water Dashboard Help https://echo.epa.gov/help/drinking-water-dashboard-help (2020).33.Allaire, M., Wu, H. & Lall, U. National trends in drinking water quality violations. Proc. Natl Acad. Sci. USA 115, 2078–2083 (2018).CAS 
Article 

Google Scholar 
34.VanDerslice, J. Drinking water infrastructure and environmental disparities: evidence and methodological considerations. Am. J. Public Health 101, S109–S114 (2011).Article 

Google Scholar 
35.Ayotte, J. D., Medalie, L., Qi, S. L., Backer, L. C. & Nolan, B. T. Estimating the high-arsenic domestic-well population in the conterminous United States. Environ. Sci. Technol. 51, 12443–12454 (2017).CAS 
Article 

Google Scholar 
36.EPA. Private Drinking Water Wells https://www.epa.gov/privatewells (2020).37.DeSimone, L. A. & Hamilton, P. A. Quality of Water from Domestic Wells in Principal Aquifers of the United States, 1991–2004 (US Department of the Interior, US Geological Survey, 2009).38.Rosenfeld, P. E. & Feng, L. G. H. in Risks of Hazardous Wastes (eds Paul E. Rosenfeld & Lydia G. H. Feng) 215–222 (William Andrew Publishing, 2011).39.Environmental Protection Agency. Federal Facilities Restoration and Reuse Office. Technical Fact Sheet – 1,4-Dioxane (EPA, 2017).40.Bilal, M., Adeel, M., Rasheed, T., Zhao, Y. & Iqbal, H. M. N. Emerging contaminants of high concern and their enzyme-assisted biodegradation–a review. Environ. Int. 124, 336–353 (2019).CAS 
Article 

Google Scholar 
41.Bexfield, L. M., Toccalino, P. L., Belitz, K., Foreman, W. T. & Furlong, E. T. Hormones and pharmaceuticals in groundwater used as a source of drinking water across the United States. Environ. Sci. Technol. 53, 2950–2960 (2019).CAS 
Article 

Google Scholar 
42.NDMA and Other Nitrosamines – Drinking Water Issues https://www.waterboards.ca.gov/drinking_water/certlic/drinkingwater/NDMA.html (2020).43.EPA. Technical Fact Sheet – N-Nitroso-dimethylamine (NDMA) https://www.epa.gov/sites/production/files/201403/documents/ffrrofactsheet_contaminant_ndma_january2014_final.pdf (2014).44.Yang, Y., Ok, Y. S., Kim, K.-H., Kwon, E. E. & Tsang, Y. F. Occurrences and removal of pharmaceuticals and personal care products (PPCPs) in drinking water and water/sewage treatment plants: a review. Sci. Total Environ. 596, 303–320 (2017).Article 
CAS 

Google Scholar 
45.Wang, Y. et al. Removal of pharmaceutical and personal care products (PPCPs) from municipal waste water with integrated membrane systems, MBR-RO/NF. Int J. Environ. Res. Public Health 15, 269 (2018).Article 
CAS 

Google Scholar 
46.Hao, J. et al. Bioaccessibility evaluation of pharmaceuticals in market fish with in vitro simulated digestion. J. Hazard. Mater. 411, 125039 (2021).CAS 
Article 

Google Scholar 
47.Shen, R. & Andrews, S. A. Demonstration of 20 pharmaceuticals and personal care products (PPCPs) as nitrosamine precursors during chloramine disinfection. Water Res. 45, 944–952 (2011).CAS 
Article 

Google Scholar 
48.Richardson, S. D. Water analysis: emerging contaminants and current issues. Anal. Chem. 81, 4645–4677 (2009).CAS 
Article 

Google Scholar 
49.Premium Shower Filter | Massaging Shower Head https://www.aquasana.com/shower-head-water-filters/premium-shower-filter/no-shower-head (2020).50.Arias Espana, V. A., Mallavarapu, M. & Naidu, R. Treatment technologies for aqueous perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA): a critical review with an emphasis on field testing. Environ. Technol. Innov. 4, 168–181 (2015).Article 

Google Scholar 
51.Shower Filters for Chlorine https://www.aquasana.com/shower-head-water-filters (2020).52.Ye, Z., Weinberg, H. S. & Meyer, M. T. Occurrence of antibiotics in drinking water. Anal. Bioanal. Chem. 387, 1365–1377 (2007).Article 
CAS 

Google Scholar 
53.Ye, Z., Weinberg, H. & Meyer, M. Occurrence of Antibiotics in Drinking Water (IATP, 2004).54.A Simple Guide to Water Filtration https://www.filtersfast.com/blog/guide-to-water-purification/ (2020).55.Fresh Water System. What is a Sediment Filter and How Does It Work? https://www.freshwatersystems.com/blogs/blog/what-is-a-sediment-filter-and-how-does-it-work (2020).56.McNamara, P. What Are String Wound Water Filters and How Are They Used? https://www.waterfiltersfast.com/What-Are-String-Wound-Water-Filters-and-How-Are-They-Used_b_74.html (2017).57.UNISUN. 5um PP Yarn String Wound Filter Cartridges with stainless steel Core or PP Core http://zeusfilter-com.sell.everychina.com/p-107966081-5um-pp-yarn-string-wound-filter-cartridges-with-stainless-steel-core-or-pp-core.html (2020).58.Alexandratos, S. D. Ion-exchange resins: a retrospective from industrial and engineering chemistry research. Ind. Eng. Chem. Res. 48, 388–398 (2009).CAS 
Article 

Google Scholar 
59.Levchuk, I., Marquez, J. J. R. & Sillanpaa, M. Removal of natural organic matter (NOM) from water by ion exchange – a review. Chemosphere 192, 90–104 (2018).CAS 
Article 

Google Scholar 
60.SAMCO. What Is the Difference Between Cation and Anion Exchange Resins? https://www.samcotech.com/difference-cation-anion-exchange-resins/ (2018).61.Basic Ion Exchange for Residential Water Treatment—Part 3 http://wcponline.com/2005/07/15/basic-ion-exchange-residential-water-treatment-part-3/ (2005).62.Lalmi, A., Bouhidel, K.-E., Sahraoui, B. & Anfif, C. E. H. Removal of lead from polluted waters using ion exchange resin with Ca(NO3)2 for elution. Hydrometallurgy 178, 287–293 (2018).CAS 
Article 

Google Scholar 
63.Batista J.R., M. F. X., Vieira A. R. in Perchlorate in the Environment. Environmental Science Research Vol. 57 (ed. Urbansky E.T.) (Springer, 2000).64.Wu, C. C. et al. The microbial colonization of activated carbon block point-of-use (PoU) filters with and without chlorinated phenol disinfection by-products. Environ. Sci. Water Res. Technol. 3, 830–843 (2017).CAS 
Article 

Google Scholar 
65.Karnib, M., Kabbani, A., Holail, H. & Olama, Z. Heavy metals removal using activated carbon, silica and silica activated carbon composite. Energy Procedia 50, 113–120 (2014).CAS 
Article 

Google Scholar 
66.Gaur, V. Adsorption on activated carbon: role of surface chemistry in water purification. In Aqueous Phase Adsorption: Theory, Simulations and Experiments (eds Singh, J. K. & Verma, N.) (CRC Press, 2018).67.Pego, M., Carvalho, J. & Guedes, D. Surface modifications of activated carbon and its impact on application.Surf. Rev. Lett. 26, 1830006 (2019).CAS 
Article 

Google Scholar 
68.Rajaeian, B., Allard, S., Joll, C. & Heitz, A. Effect of preconditioning on silver leaching and bromide removal properties of silver-impregnated activated carbon (SIAC). Water Res. 138, 152–159 (2018).CAS 
Article 

Google Scholar 
69.Watson, K., Farre, M. J. & Knight, N. Comparing a silver-impregnated activated carbon with an unmodified activated carbon for disinfection by-product minimisation and precursor removal. Sci. Total Environ. 542, 672–684 (2016).CAS 
Article 

Google Scholar 
70.Mishra, S. P. & Ghosh, M. R. Use of silver impregnated activated carbon (SAC) for Cr(VI) removal. J. Environ. Chem. Eng. 8, 103641 (2020).71.Lenntech. KDF Process Media https://www.lenntech.com/kdf-filter-media.htm (2020).72.Zhang, F. & Liu, X. Experimental study on removal of phenol from water by KDF metal filter. China Water Wastewater 17, 70–71 (2001).
Google Scholar 
73.CrystalClear. KDF/GAC Water Filter Replacement Cartridge https://www.crystalclearsupply.com/KDF_GAC_Water_Filter_Cartridge_p/cf.htm (2020).74.KDF Fluid Treatment, I. KDF Process Media Aid in Chlorine, Algae, Bacteria and Iron Removal from Water http://www.kdfft.com/products.htm (2020).75.KDF Fluid Treatment, I. KDF®55 and 85 Process Media in Point-of-Entry Water Treatment Systems – Chlorine, Iron and Hydrogen Sulfide Reduction http://www.kdfft.com/pdfs/kdf55_85Sheet.pdf (2020).76.Xiong, R. J., P., L. W., Xi,X. M. & Xiao, S. W. Application and amelioration prospect of copper-zinc alloy in water treatment. Ind. Saf. Environ. Prot. 30, 5–8 (2004).
Google Scholar 
77.Zhai, Y. J., Tian, X. J., He, G. H. & Zhang, M. An experimental study on removal of residual chlorine in water by using nano-metal clusters media. Tianjin Chem. Ind. 24, 56–59 (2010).CAS 

Google Scholar 
78.Glanris. 100% Green Filtration Media, at Ultra-Low Cost https://www.glanris.com/glanris-features (2020).79.Glanris. BETTER, FASTER, MORE AFFORDABLE WATER FILTRATION MEDIA SOLUTION https://static1.squarespace.com/static/5c7ed0eb7d0c9159f879a61f/t/5db995c88650c07fab772463/1572443592570/Glanris+water+filtration+media_data+sheet.pdf (2020).80.Swift. We are Providing Eco-Friendly Water Filtration Products http://www.swiftgreenfilters.com/about-us/ (2020).81.Swift. Home Page for Swift Green Filter http://www.swiftgreenfilters.com/ (2020).82.Asadollahi, M., Bastani, D. & Musavi, S. A. Enhancement of surface properties and performance of reverse osmosis membranes after surface modification: a review. Desalination 420, 330–383 (2017).CAS 
Article 

Google Scholar 
83.Different water filtration methods explained https://www.freedrinkingwater.com/water-education/quality-water-filtration-method-page3.htm (2020).84.Madsen, H. T. Membrane filtration in water treatment – removalof micropollutants. In Chemistry of Advanced Environmental Purification Processes of Water (ed. Søgaard, E.G.) 199–248 (Elsevier, 2014).85.Ramesh, A. et al. Biofouling in membrane bioreactor. Sep Sci. Technol. 41, 1345–1370 (2006).CAS 
Article 

Google Scholar 
86.Kuo, D. H.-W. et al. Assessment of human adenovirus removal in a full-scale membrane bioreactor treating municipal wastewater. Water Res. 44, 1520–1530 (2010).CAS 
Article 

Google Scholar 
87.Al-Karaghouli, A. & Kazmerski, L. L. Energy consumption and water production cost of conventional and renewable-energy-powered desalination processes. Renew. Sustain. Energy Rev. 24, 343–356 (2013).CAS 
Article 

Google Scholar 
88.Rodriguez, C. et al. Indirect potable reuse: a sustainable water supply alternative. Int J. Environ. Res. Public Health 6, 1174–1209 (2009).CAS 
Article 

Google Scholar 
89.Tam, L. S., Tang, T. W., Lau, G. N., Sharma, K. R. & Chen, G. H. A pilot study for wastewater reclamation and reuse with MBR/RO and MF/RO systems. Desalination 202, 106–113 (2007).CAS 
Article 

Google Scholar 
90.Tang, C. Y., Fu, Q. S., Robertson, A. P., Criddle, C. S. & Leckie, J. O. Use of reverse osmosis membranes to remove perfluorooctane sulfonate (PFOS) from semiconductor wastewater. Environ. Sci. Technol. 40, 7343–7349 (2006).CAS 
Article 

Google Scholar 
91.Plumlee, M. H., Lopez-Mesas, M., Heidlberger, A., Ishida, K. P. & Reinhard, M. N-nitrosodimethylamine (NDMA) removal by reverse osmosis and UV treatment and analysis via LC-MS/MS. Water Res. 42, 347–355 (2008).CAS 
Article 

Google Scholar 
92.Stefan, M. I. UV direct photolysis of N‐nitrosodimethylamine (NDMA): kinetic and product study. Helvetica Chim. Acta 85, 1416–1426 (2002).CAS 
Article 

Google Scholar 
93.Master, H. 1,4-Dioxane: The hidden danger in your daily routine http://www.homemasterfiltersblog.com/jon-sigona/2017/5/23/14-dioxane-the-hidden-danger-in-your-daily-routine (2017).94.Song, K., Mohseni, M. & Taghipour, F. Application of ultraviolet light-emitting diodes (UV-LEDs) for water disinfection: a review. Water Res. 94, 341–349 (2016).CAS 
Article 

Google Scholar 
95.Collivignarelli, M., Abbà, A., Benigna, I., Sorlini, S. & Torretta, V. Overview of the main disinfection processes for wastewater and drinking water treatment plants. Sustainability 10, 86 (2017).96.Li, H. Y., Osman, H., Kang, C. W., Ba, T. & Lou, J. Numerical and experimental studies of water disinfection in UV reactors. Water Sci. Technol. 80, 1456–1465 (2019).CAS 
Article 

Google Scholar 
97.Kalisvaart, B. F. Re-use of wastewater: preventing the recovery of pathogens by using medium-pressure UV lamp technology. Water Sci. Technol. 50, 337–344 (2004).CAS 
Article 

Google Scholar 
98.Jarvis, P., Autin, O., Goslan, E. H. & Hassard, F. Application of ultraviolet light-emitting diodes (UV-LED) to full-scale drinking-water disinfection. Water 11, 1894 (2019).99.Chatterley, C. & Linden, K. Demonstration and evaluation of germicidal UV-LEDs for point-of-use water disinfection. J. Water Health 8, 479–486 (2010).CAS 
Article 

Google Scholar 
100.Beck, S. E. et al. Evaluating UV-C LED disinfection performance and investigating potential dual-wavelength synergy. Water Res. 109, 207–216 (2017).CAS 
Article 

Google Scholar 
101.Zoschke, K., Bornick, H. & Worch, E. Vacuum-UV radiation at 185 nm in water treatment–a review. Water Res. 52, 131–145 (2014).CAS 
Article 

Google Scholar 
102.Li, J. et al. Enhanced germicidal effects of pulsed UV-LED irradiation on biofilms. J. Appl. Microbiol. 109, 2183–2190 (2010).CAS 
Article 

Google Scholar 
103.Wengraitis, S. et al. Pulsed UV-C disinfection of Escherichia coli with light-emitting diodes, emitted at various repetition rates and duty cycles. Photochem. Photobiol. 89, 127–131 (2013).104.Hasson, D., Fine, L., Sagiv, A., Semiat, R. & Shemer, H. Modeling remineralization of desalinated water by micronized calcite dissolution. Environ. Sci. Technol. 51, 12481–12488 (2017).CAS 
Article 

Google Scholar 
105.Shemer, H. et al. Remineralization of desalinated water by limestone dissolution with carbon dioxide. Desalin. Water Treat. 51, 877–881 (2013).CAS 
Article 

Google Scholar 
106.Lahav, O. & Birnhack, L. Quality criteria for desalinated water following post-treatment. Desalination 207, 286–303 (2007).CAS 
Article 

Google Scholar 
107.Biyoune, M. G. et al. Remineralization of permeate water by calcite bed in the Daoura’s plant (south of Morocco). Eur. Phys. J. Spec. Top. 226, 931–941 (2017).CAS 
Article 

Google Scholar 
108.3-5mm Alkaline Ceramic Balls Make Alkaline water PH 8-9.5 For Water Filters,Water Purifiers https://www.aliexpress.com/item/32804763534.html (2020).109.Chaturvedi, S. I. Electrocoagulation: a novel waste water treatment method. Int. J. Mod. Eng. Res. 3, 93–100 (2013).
Google Scholar 
110.Porada, S., Zhao, R., van der Wal, A., Presser, V. & Biesheuvel, P. M. Review on the science and technology of water desalination by capacitive deionization. Prog. Mater. Sci. 58, 1388–1442 (2013).CAS 
Article 

Google Scholar 
111.Welgemoed, T. J. & Schutte, C. F. Capacitive Deionization Technology™: an alternative desalination solution. Desalination 183, 327–340 (2005).CAS 
Article 

Google Scholar 
112.Blair, J. W. & Murphy, G. W. Saline water conversion. Adv. Chem. Ser. 27, 206 (1960).Article 

Google Scholar 
113.Johnson, A. M., Venolia, A. W., Wilbourne, R. G. & Newman, J. The Electrosorb Process for Desalting Water. (NTRL, 1970).114.Lee, J.-B., Park, K.-K., Eum, H.-M. & Lee, C.-W. Desalination of a thermal power plant wastewater by membrane capacitive deionization. Desalination 196, 125–134 (2006).CAS 
Article 

Google Scholar 
115.Lee, J., Kim, S., Kim, C. & Yoon, J. Hybrid capacitive deionization to enhance the desalination performance of capacitive techniques. Energy Environ. Sci. 7, 3683–3689 (2014).CAS 
Article 

Google Scholar 
116.Gao, X., Omosebi, A., Landon, J. & Liu, K. Surface charge enhanced carbon electrodes for stable and efficient capacitive deionization using inverted adsorption–desorption behavior. Energy Environ. Sci. 8, 897–909 (2015).CAS 
Article 

Google Scholar 
117.Pasta, M., Wessells, C. D., Cui, Y. & La Mantia, F. A desalination battery. Nano Lett. 12, 839–843 (2012).CAS 
Article 

Google Scholar 
118.Jeon, S. I. et al. Desalination via a new membrane capacitive deionization process utilizing flow-electrodes. Energy Environ. Sci. 6, 1471–1475 (2013).CAS 
Article 

Google Scholar 
119.ElectraMet. Heavy Metal Removal from Wastewater with No Chemicals or Sludge https://electramet.com/wp-content/uploads/2020/03/ElectraMet-Battery.R1.pdf (2020).120.Reverse Osmosis Systems https://www.freedrinkingwater.com/products/ (2020).121.Reverse Osmosis Under Counter Water Filter https://www.aquasana.com/drinking-water-filter-systems/reverse-osmosis-claryum (2020).122.Whole Home Water Filter Systems https://www.aquasana.com/whole-house-water-filters (2020).123.AC-30 Good Water Machine Under Sink Water Filtration System https://www.culligan.com/product/ac-30-good-water-machine-under-sink-water-filtration-system (2020).124.Aqua-Cleer Advanced Under Sink Water Filter System https://www.culligan.com/product/aqua-cleer-advanced-under-sink-water-filter-system (2020).125.UltraEase Reverse Osmosis Filtration System https://www.whirlpoolwatersolutions.com/products/ultraease-reverse-osmosis-filtration-system/ (2020).126.Pro Series – UltraEase Reverse Osmosis Filtration System https://www.whirlpoolwatersolutions.com/products/new-pro-series-ultraease-reverse-osmosis-filtration-system/ (2020).127.Whole House Sediment Filter Systems https://www.pelicanwater.com/water-filters/sediment-filters/ (2020).128.6-Stage Reverse Osmosis (RO) System https://www.pelicanwater.com/drinking-filters/pelican-reverse-osmosis/ (2020).129.FX12P | Replacement Water Filters – Reverse Osmosis System https://www.geapplianceparts.com/store/parts/spec/FX12P (2020).130.GXRM10RBL | Reverse Osmosis Filtration System https://www.geapplianceparts.com/store/parts/spec/GXRM10RBL (2020).131.2-Stage Under Counter Water Filter | NSF Certified https://www.aquasana.com/drinking-water-filter-systems/under-counter-faucet-2-stage (2020).132.Under Sink Water Filters https://www.aquasana.com/under-sink-water-filters (2020).133.GXK285JBL | Dual Flow Water Filtration System https://www.geapplianceparts.com/store/parts/spec/GXK285JBL (2020).134.GXK185KBL | Single Stage Filtration System https://www.geapplianceparts.com/store/parts/spec/GXK185KBL (2020).135.GXULQK | Full Flow Water Filtration System https://www.geapplianceparts.com/store/parts/spec/GXULQK (2020).136.iSpring CU-A4 4-Stage Compact, High Efficiency Under Sink / Inline Drinking Water Filter System for Sink, Refrigerator and RV https://www.123filter.com/ac/ultra-filtration-under-sink-water-filter-system/ispring–4-stage-ultrafiltration-water-filtration-system (2020).137.iSpring US21B Heavy Duty 2-Stage Undersink Water Filtration System https://www.123filter.com/ac/direct-connect-under-sink-water-filter-system/ispring–2-stage-under-sink-water-filter-45×10-big-blue-1-ports_803 (2020).138.Under Counter Drinking Filter System https://www.pelicanwater.com/drinking-filters/undercounter-drinking-filter/ (2020).139.Pelican 3-Stage Under-Counter Drinking Water Filter https://www.pelicanwater.com/drinking-filters/pelican-3-stage-drinking-filter/ (2020).140.UltraEase Dual Stage Water Filtration System https://www.whirlpoolwatersolutions.com/products/new-ultraease-dual-stage-water-filtration-system/ (2020).141.UltraEase Kitchen & Bath Water Filtration System https://www.whirlpoolwatersolutions.com/products/ultraease-kitchen-bath-water-filtration-system/ (2020).142.XFWE | Refrigeration Water Filter https://www.geapplianceparts.com/store/parts/spec/XWF (2020).143.UltraEase In-Line Refrigerator Filtration System https://www.whirlpoolwatersolutions.com/products/ultraease-in-line-refrigerator-water-filtration-system/ (2020).144.iSpring CKC1C Countertop water filter, Clear Housing with Carbon https://www.123filter.com/ac/ispring-ckc1c-countertop-water-filter-clear-housing-with-carbon (2020).145.iSpring Filter Water Pitcher 10 Cup BPA Free,Blue https://www.amazon.ca/iSpring-Filter-Water-Pitcher-Free/dp/B077SLX54C (2020).146.iSpring Water Systems https://www.123filter.com/ac/the-battle-of-the-best-water-conditioner-ispring-ed2000-vs-ispring-wds150k (2020).147.DF1/DF2 Series https://www.123filter.com/ac/faucet-mounted-water-filter-df-series/ispring-df1-faucet-mount-water-filters-removal-500gal-filter-life-15gpm-filtration-rate_624 (2020).148.iSpring SF3S 15-Stage Never Clog High Output Universal Shower Filter https://www.123filter.com/ac/shower-filter/ispring-sf3s-stylish-multi-stage-high-output-shower-head-filter-with-replaceable-cartridge-to-remove-chlorine-sediment-and-heavy-minerals-chrome_782_783 (2020).149.iSpring FT15INRF Universal Refrigerator Water Filter, Fridge Top Water Filter, 1-Stage https://www.123filter.com/ac/ispring-universal-refrigerator-water-filter-fridge-top-water-filter-1-stage (2020).150.Faucet Filtration Systems – Products https://www.pur.com/water-filtration/faucet-filtration-systems (2020).151.GXSM01HWW | GE GXSM01HWW Universal Shower Filtration System https://www.geapplianceparts.com/store/parts/spec/GXSM01HWW (2020).152.Pelican Premium Shower Filter https://www.pelicanwater.com/shower-filters/shower-filter/ (2020).153.Wikipedia, Self-Monitoring, Analysis and Reporting Technology (SMART) https://en.wikipedia.org/wiki/S.M.A.R.T (2020).154.Silverio-Fernández, M., Renukappa, S. & Suresh, S. What is a smart device? – a conceptualisation within the paradigm of the Internet of Things. Vis. in Eng. 6, 3 (2018).Article 

Google Scholar 
155.Filtrete™. Smart Filter Technology https://www.filtrete.com/3M/en_US/filtrete/products/smart-filter-technology/ (2020).156.Kinetico Water System https://www.kinetico.com/smart-home/ (2020).157.HYDAC. Flow Rate Sensors https://www.hydac.com/de-en/products/sensors/flow-rate-sensors.html (2020).158.PUR. Facet Filtration https://www.pur.com/ (2019).159.AMI. In-line tds water quality monitors for home ro systems by hm digital https://appliedmembranes.com/tds-water-quality-monitors-for-home-ro-systems.html (2020).160.Dual Inline TDS Meter DM https://media.cdn.bulkreefsupply.com/media/catalog/product/cache/1/image/2fcdbae242296b85abb30af0b2420513/2/0/200031-TDS-Meter-Dual-Inline-DM-1-a_1.jpg (2020).161.Mousavi Mashhadi, S. K., Yadollahi, H. & Marvian Mashhad, A. Design and manufacture of TDS measurement and control system for water purification in reverse osmosis by PID fuzzy logic controller with the ability to compensate effects of temperature on measurement. Turk. J. Elec. Eng. Comp. Sci. 24, 2589–2608 (2016).Article 

Google Scholar 
162.IC Controls. Total Dissolved Solids Measurement https://iccontrols.com/wp-content/uploads/art-v1400001_total_dissolved_solids_measurement.pdf (2020).163.Conductivity convertor https://www.lenntech.com/calculators/conductivity/tds_engels.htm (2020).164.Gravity: Analog TDS Sensor/Meter for Arduino https://www.dfrobot.com/product-1662.html (2020).165.McMaster-Carr. tds (total dissolved solids) probes https://www.mcmaster.com/tds-(total-dissolved-solids)-probes/ (2020).166.Single TDS Sensor Probe http://hmdigital.com/product/sp-5 (2020).167.Roy, E. Please Stop Using TDS (or ppm) Testers To Evaluate Water Quality https://www.hydroviv.com/blogs/water-smarts/tds-meters-and-testers (2020).168.Sensorex. Conductivity Monitoring for Reverse Osmosis https://sensorex.com/blog/2017/07/12/conductivity-monitoring-reverse-osmosis/ (2020).169.Gravity: Analog pH Sensor / Meter Kit For Arduino https://www.dfrobot.com/product-1025.html (2020).170.Gravity: Analog ORP Sensor Meter For Arduino https://www.dfrobot.com/product-1071.html (2020).171.The Combination pH Electrode http://ion.chem.usu.edu/~sbialkow/Classes/3600/Overheads/pH/ionselctive.html (2020).172.pH/ORP Measurement for Reverse Osmosis https://www.yokogawa.com/us/library/resources/application-notes/ph-orp-measurement-for-reverse-osmosis/ (2016).173.FUNDAMENTALS OF ORP MEASUREMENT https://www.emerson.com/documents/automation/application-data-sheet-fundamentals-of-orp-measurement-rosemount-en-68438.pdf (2020).174.Vikesland, P. J. Nanosensors for water quality monitoring. Nat. Nanotechnol. 13, 651–660 (2018).CAS 
Article 

Google Scholar 
175.Qu, X., Brame, J., Li, Q. & Alvarez, P. J. J. Nanotechnology for a safe and sustainable water supply: enabling integrated water treatment and reuse. Acc. Chem. Res. 46, 834–843 (2013).CAS 
Article 

Google Scholar 
176.Bhattacharyya, S. et al. Nanotechnology in the water industry, part 1: occurrence and risks. J. Am. Water Works Assoc. 109, 30–37 (2017).Article 

Google Scholar 
177.Vikesland, P. J. & Wigginton, K. R. Nanomaterial enabled biosensors for pathogen monitoring-a review. Environ. Sci. Technol. 44, 3656–3669 (2010).CAS 
Article 

Google Scholar 
178.Kudr, J. et al. Magnetic nanoparticles: from design and synthesis to real world applications. Nanomaterials 7, 243 (2017).Article 
CAS 

Google Scholar 
179.Das, R. et al. Recent advances in nanomaterials for water protection and monitoring. Chem. Soc. Rev. 46, 6946–7020 (2017).CAS 
Article 

Google Scholar 
180.Majdi, H. S., Jaafar, M. S. & Abed, A. M. Using KDF material to improve the performance of multi-layers filters in the reduction of chemical and biological pollutants in surface water treatment. S. Afr. J. Chem. Eng. 28, 39–45 (2019).
Google Scholar 
181.Water, E. What is the Alkaline + Ultraviolet RO System https://www.expresswater.com/pages/ro-alkaline-uv (2020).182.Yang, Y., Asiri, A. M., Du, D. & Lin, Y. Acetylcholinesterase biosensor based on a gold nanoparticle–polypyrrole–reduced graphene oxide nanocomposite modified electrode for the amperometric detection of organophosphorus pesticides. Analyst 139, 3055–3060 (2014).CAS 
Article 

Google Scholar 
183.Banerjee, T. et al. Multiparametric magneto-fluorescent nanosensors for the ultrasensitive detection of Escherichia coli O157: H7. ACS Infect. Dis. 2, 667–673 (2016).CAS 
Article 

Google Scholar 
184.DeSimone, L. A., Hamilton, P. A. & Gilliom, R. J. Quality of Water from Domestic Wells in Principal Aquifers of the United States, 1991–2004, Overview of Major Findings (USGS, 2009).185.EPA. Basic Information about Lead in Drinking Water https://www.epa.gov/ground-water-and-drinking-water/basic-information-about-lead-drinking-water (2020).186.Pirbazari, M. & Weber, W. J. Removal of dieldrin from water by activated carbon. J. Environ. Eng. 110, 656–669 (1984).CAS 
Article 

Google Scholar 
187.Moussavi, G., Hosseini, H. & Alahabadi, A. The investigation of diazinon pesticide removal from contaminated water by adsorption onto NH4Cl-induced activated carbon. Chem. Eng. J. 214, 172–179 (2013).CAS 
Article 

Google Scholar 
188.Oregon Health Authority, Atrazine and Drinking Water https://www.oregon.gov/oha/ph/healthyenvironments/drinkingwater/monitoring/documents/health/atrazine.pdf (2015).189.Oregon Health Authority. Alachlor and drinking water https://www.oregon.gov/oha/PH/HealthyEnvironments/DrinkingWater/Monitoring/Documents/health/alachlor.pdf Alachlor and drinking water (2015).190.SAMCO. What Are the Different Types of Ion Exchange Resins and What Applications Do They Serve? https://www.samcotech.com/different-types-ion-exchange-resins-applications-serve/ (2017).191.Warsinger, D. M. et al. A review of polymeric membranes and processes for potable water reuse. Prog. Polym. Sci. 81, 209–237 (2016).Article 
CAS 

Google Scholar 
192.Bellona, C., Drewes, J. E., Xu, P. & Amy, G. Factors affecting the rejection of organic solutes during NF/RO treatment – a literature review. Water Res. 38, 2795–2809 (2004).CAS 
Article 

Google Scholar 
193.Sorlini, S. & Collivignarelli, C. Chlorite removal with granular activated carbon. Desalination 176, 255–265 (2005).CAS 
Article 

Google Scholar 
194.Wang, L., Sun, Y. N. & Chen, B. Y. Rejection of haloacetic acids in water by multi-stage reverse osmosis: efficiency, mechanisms, and influencing factors. Water Res. 144, 383–392 (2018).CAS 
Article 

Google Scholar 
195.Woodard, J. How to Remove Chloramines from Water https://www.freshwatersystems.com/blogs/blog/how-to-remove-chloramines-from-water (2020).196.Chen, A. S. C., Wang, L. L., Sorg, T. J. & Lytle, D. A. Removing arsenic and co-occurring contaminants from drinking water by full-scale ion exchange and point-of-use/point-of-entry reverse osmosis systems. Water Res. 172, 115455 (2020).197.Pehlivan, E. & Altun, T. Ion-exchange of Pb2+, Cu2+, Zn2+, Cd2+, and Ni2+ ions from aqueous solution by Lewatit CNP 80. J. Hazard. Mater. 140, 299–307 (2007).198.Mohsen-Nia, M., Montazeri, P. & Modarress, H. Removal of Cu2+ and Ni2+ from wastewater with a chelating agent and reverse osmosis processes. Desalination 217, 276–281 (2007).CAS 
Article 

Google Scholar 
199.Korngold, E. Iron removal from tap water by a cation exchanger. Desalination 94, 243–249 (1994).CAS 
Article 

Google Scholar 
200.Gamal Khedr, M. Radioactive contamination of groundwater, special aspects and advantages of removal by reverse osmosis and nanofiltration. Desalination 321, 47–54 (2013).CAS 
Article 

Google Scholar 
201.Majlesi, M., Mohseny, S. M., Sardar, M., Golmohammadi, S. & Sheikhmohammadi, A. Improvement of aqueous nitrate removal by using continuous electrocoagulation/electroflotation unit with vertical monopolar electrodes. Sustain. Environ. Res. 26, 287–290 (2016).CAS 
Article 

Google Scholar 
202.Sgroi, M., Vagliasindi, F. G. A., Snyder, S. A. & Roccaro, P. N-nitrosodimethylamine (NDMA) and its precursors in water and wastewater: a review on formation and removal. Chemosphere 191, 685–703 (2018).CAS 
Article 

Google Scholar 
203.Yao, Y., Volchek, K., Brown, C. E., Robinson, A. & Obal, T. Comparative study on adsorption of perfluorooctane sulfonate (PFOS) and perfluorooctanoate (PFOA) by different adsorbents in water. Water Sci. Technol. 70, 1983–1991 (2014).CAS 
Article 

Google Scholar 
204.Levchuk, I., Bhatnagar, A. & Sillanpää, M. Overview of technologies for removal of methyl tert-butyl ether (MTBE) from water. Sci. Total Environ. 476-477, 415–433 (2014).CAS 
Article 

Google Scholar 
205.Yue, X., Feng, S., Li, S., Jing, Y. & Shao, C. Bromopropyl functionalized silica nanofibers for effective removal of trace level dieldrin from water. Colloids Surf. A: Physicochem. Eng. Asp. 406, 44–51 (2012).CAS 
Article 

Google Scholar 
206.Hassan, A. F., Elhadidy, H. & Abdel-Mohsen, A. M. Adsorption and photocatalytic detoxification of diazinon using iron and nanotitania modified activated carbons. J. Taiwan Inst. Chem. Eng. 75, 299–306 (2017).CAS 
Article 

Google Scholar 
207.Castro, C. S., Guerreiro, M. C., Gonçalves, M., Oliveira, L. C. A. & Anastácio, A. S. Activated carbon/iron oxide composites for the removal of atrazine from aqueous medium. J. Hazard. Mater. 164, 609–614 (2009).CAS 
Article 

Google Scholar 
208.Calvo, L., Gilarranz, M. A., Casas, J. A., Mohedano, A. F. & Rodríguez, J. J. Hydrodechlorination of alachlor in water using Pd, Ni and Cu catalysts supported on activated carbon. Appl. Catal. B: Environ. 78, 259–266 (2008).CAS 
Article 

Google Scholar 
209.Wang, H., Keller, A. & Li, F. Natural organic matter removal by adsorption onto carbonaceous nanoparticles and coagulation. J. Environ. Eng. 136, 1075 (2010).210.Bellona, C., Drewes, J. E., Xu, P. & Amy, G. Factors affecting the rejection of organic solutes during NF/RO treatment—a literature review. Water Res. 38, 2795–2809 (2004).CAS 
Article 

Google Scholar 
211.Dolar, D., Košutić, K. & Vučić, B. RO/NF treatment of wastewater from fertilizer factory — removal of fluoride and phosphate. Desalination 265, 237–241 (2011).CAS 
Article 

Google Scholar 
212.Countertop Filter Replacement | AQ-4035 https://www.aquasana.com/replacement-drinking-water-filters/countertop-replacement-filter (2020).213.Countertop Water Filters https://www.aquasana.com/countertop-water-filters (2020).214.Lesimple, A., Ahmed, F. E. & Hilal, N. Remineralization of desalinated water: Methods and environmental impact. Desalination 496, 114692 (2020).CAS 
Article 

Google Scholar 
215.Longlast Filter https://www.brita.com/replacement-filters/longlast/ (2020).216.Premium Water Bottle FAQs https://www.brita.com/water-bottle-support (2020).217.iSpring CKC1 countertop water filter https://www.123filter.com/ac/countertop-portable-water-filter/ispring-ckc1-countertop-water-filter-white-housing-with-carbon (2020).218.iSpring CKC2 High Output 2 Stage Countertop Water Filtration Dispenser System https://www.123filter.com/ac/countertop-portable-water-filter/ispring-ckc2-high-output-2-stage-countertop-water-filtration-dispenser-system–includes-activated-carbon-and-carbon-block-filters (2020).219.Kinetico K5 Drinking Water Station https://www.kinetico.com/drinking-water-filtration-systems/kinetico-k5-drinking-water-station/ (2020).220.AquaKinetic A200 Drinking Water System https://www.kinetico.com/drinking-water-filtration-systems/ (2020).221.Countertop Drinking Filter System https://www.pelicanwater.com/drinking-filters/countertop-drinking-filter/ (2020). More